10M08DFV81C8G - MAX 10 FPGA, 8K LE, 81-WLCSP | Altera / Intel
Référence : 10M08DFV81C8G ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.45 | $12,45 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.6 | $4 300,00 |
| 1 000 | $7.4 | $7 400,00 |
10M08DFV81C8G Présentation
An FPGA (Field-Programmable Gate Array) is a reprogrammable semiconductor device whose logic fabric, routing, and I/O can be configured by the designer after manufacture. Within the broader taxonomy, FPGAs sit alongside microcontrollers, DSPs, and ASICs as reconfigurable compute fabrics. The MAX 10 family specifically integrates a dual-configuration flash, analog-to-digital converters, and SRAM into a single chip, bridging the gap between traditional CPLDs and higher-density Cyclone-series FPGAs.
Key features of the 10M08DFV81C8G include 8,000 logic elements, 56 embedded 18x18 multipliers, 378 Kbits of block RAM, integrated ADC, and instant-on support from on-die flash. The device supports commercial temperature grade (0C to +85C) with a speed grade 8 core. The 81-ball WLCSP (Wafer Level Chip Scale Package) delivers the smallest footprint in the MAX 10 portfolio for space-constrained designs.
Typical applications include industrial motor control, IoT sensor hubs, low-cost video processing, and portable instrumentation. The integrated ADC makes it well suited for data acquisition front-ends, while the embedded multipliers enable DSP pipelines such as FFTs and digital filters.
When designing with this part, engineers should review Quartus Prime device pin-out files for the V81 ball map and observe WLCSP PCB layout guidelines (microvia stack-up, NSMD pads). The non-volatile architecture removes boot-time configuration delays inherent to SRAM-based FPGAs.
This page synthesizes distributor pricing, drop-in same-brand alternatives from the MAX 10 family, and engineering design notes not consolidated in the manufacturer datasheet.
Alternatives de remplacement direct pour 10M08DFV81C8G — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 10M08DFV81C8G (même facteur de forme et même empreinte) — différant par Mounting Type, Configuration Memory, Operating Temperature, Package, Integrated ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
10M08DFV81C8GES
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
10M08DFV81C7G
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
10M08DCV81C8G
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
10M08DCV81C7G
✅ Remplacement direct✓ En stock
$16.2 / unité
Voir la fiche technique →10M08DCV81I7G
✅ Remplacement direct✓ En stock
$26.85 / unité
Voir la fiche technique →10M08DFV81C8G Valeurs maximales et caractéristiques électriques
| Series | MAX 10 |
| Logic Elements | 8,000 |
| Embedded Memory (User Flash) | 387,072 bits |
| Total RAM Bits | 378 Kbits |
| Number of Logic Array Blocks (LABs) | 500 |
| Number of I/O | 56 |
| Embedded 18x18 Multipliers | 56 |
| Technology | 55 nm embedded flash CMOS |
| Core Voltage | 1.2 V |
| Température de fonctionnement | 0C to +85C (Commercial) |
| Speed Grade | 8 |
| Boîtier | 81-ball WLCSP (V81) |
| Type de montage | Surface Mount (Wafer Level Chip Scale) |
| Configuration Memory | Internal (instant-on, no external flash required) |
| Statut RoHS | Compliant |
Guide de configuration des broches du 10M08DFV81C8G 81-ball wlcsp (v81)
Configuration des broches du 10M08DFV81C8G (boîtier 81-ball wlcsp (v81)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour 10M08DFV81C8G.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
10M08DFV81C8G convient pour 6 applications: Industrial Motor Control, IoT Sensor Hub Aggregation, Portable Test & Measurement, Video Processing Bridge, Automotive Body Electronics, Low-Cost FPGA Prototyping Platform.
Industrial Motor Control
The 10M08DFV81C8G fits industrial motor control with its integrated 12-bit ADC sampling current and voltage feedback, 56 (18x18) multipliers executing field-oriented control (FOC) math, and 8,000 logic elements handling encoder decoding and PWM generation. The MAX 10's instant-on from embedded flash eliminates boot-time delays seen in SRAM-based FPGAs, enabling deterministic start-up within 10 ms of power-on. A typical 3-phase FOC loop runs at 10-50 kHz PWM frequency, well within the device's Fmax at speed grade 8. Designers should reserve 30% logic headroom for safety state machines per IEC 61800 functional-safety practice.
Recommandé
IoT Sensor Hub Aggregation
The 10M08DFV81C8G aggregates multiple sensor interfaces (I2C, SPI, UART) in space-constrained IoT hubs, leveraging 56 user I/O pins and 8K LEs for protocol bridging. The 81-ball WLCSP footprint suits wearables and sensor beacons where PCB area is at a premium. Non-volatile flash storage of 387 Kbits can hold device certificates and configuration parameters, eliminating external EEPROM. The MAX 10's low quiescent current during sleep fits battery-powered designs. Designers should consult AN 692 for I/O bank I/O assignment and use Quartus Prime's power analyzer to estimate sleep-mode current.
Recommandé
Portable Test & Measurement
The 10M08DFV81C8G suits portable oscilloscopes and data loggers thanks to its integrated ADC, 56 multipliers for FFT/digital-filter pipelines, and 378 Kbits block RAM for waveform buffers. At speed grade 8, the device supports DSP throughput suitable for 1 MSPS acquisition front-ends. The 81-ball WLCSP enables compact handheld enclosures. The MAX 10's instant-on characteristic is valuable for instrument wake-up latency requirements. Engineers should review the Quartus Prime DSP Builder blocks for FIR/FFT IP and budget 20-30% logic utilization for timing closure.
Recommandé
Video Processing Bridge
The 10M08DFV81C8G bridges video interfaces such as MIPI CSI-2 to parallel CMOS or LVDS in low-cost machine-vision modules, with 56 multipliers handling scaling and color-space conversion. The 8K LE fabric fits color interpolation and gamma correction at 720p60 rates. The 81-WLCSP footprint enables camera-module integration. Designers should use Quartus Prime's Video and Image Processing (VIP) suite and verify MIPI D-PHY timing with the device's LVDS I/O in soft-CSI mode.
Recommandé
Automotive Body Electronics
While the 10M08DFV81C8G itself is commercial grade (0C to +85C), the same MAX 10 silicon is offered in industrial and automotive variants within the 10M08 family for body controllers, LED drivers, and sensor interfaces. The 56 I/O and instant-on flash make it suitable for replacing multiple CPLDs in body ECUs. Engineers targeting AEC-Q100 environments should select the automotive-grade MAX 10 OPN with the appropriate temperature range and pin-compatible package.
Recommandé
Low-Cost FPGA Prototyping Platform
The 10M08DFV81C8G is a cost-effective entry point for engineers learning Quartus Prime or prototyping glue-logic replacement for legacy PLDs. With 8K LEs and 56 multipliers, it accommodates most introductory DSP and state-machine designs. The 387 Kbits of user flash stores boot code and golden images, supporting dual-configuration boot per MAX 10 AN 555. Universities and makers can leverage the open-source RISC-V soft-core IPs from the Intel FPGA University Program on this device.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 10M08DFV81C8G — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 10M08DFV81C8GES | 10M08DFV81C7G | 10M08DCV81C8G | 10M08DCV81C7G | 10M08DCV81I7G |
|---|---|---|---|---|---|---|
| Package | 81-ball WLCSP (V81) | 81-ball WLCSP (V81) - same | 81-ball WLCSP (V81) - same | 81-ball WLCSP (V81) - same | 81-ball WLCSP (V81) - same | 81-ball WLCSP (V81) - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Logic Elements | 8,000 | 8,000 | 8,000 | 8,000 | 8,000 | 8,000 |
| Embedded Multipliers (18x18) | 56 | 56 | 56 | 56 | 56 | 56 |
| Speed Grade | 8 | 8 | 7 (faster) | 8 | 7 (faster) | 7 (industrial) |
| Temperature Grade | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) |
| User Flash (bits) | 387,072 | 387,072 | 387,072 | 387,072 | 387,072 | 387,072 |
| Variant Family | DF (standard MAX 10) | DF (ES distribution) | DF (standard MAX 10) | DC (dual-core enhanced) | DC (dual-core enhanced) | DC (dual-core industrial) |
Principaux différenciateurs
- Non-volatile instant-on architecture (vs 10M08DCV81C8G)
- Speed grade 8 (C8) for cost-optimized designs (vs 10M08DFV81C7G)
- Commercial temperature grade for indoor equipment (vs 10M08DCV81I7G)
Notes de conception
Estimated: The 81-ball WLCSP requires microvia PCB technology. Use 0.4 mm ball pitch with NSMD (Non-Solder Mask Defined) pads of 0.25 mm diameter per the Altera MAX 10 packaging user guide (UG-01939). The PCB stack-up should be a 1-2-1 or 1-2-1-2 microvia-in-pad design with 100 um laser-drilled vias. Underfill (epoxy) is strongly recommended for mechanical reliability in shock and vibration environments. Coplanarity must be held below 50 um to avoid open joints during reflow.
The 10M08DFV81C8G requires a clean 1.2 V core supply. Use a buck regulator with less than 30 mV peak-to-peak ripple; the device is sensitive to VCC core noise which can degrade ADC accuracy. Place 100 nF X7R decoupling on every VCC pin within 2 mm trace length, plus one 10 uF bulk capacitor per voltage rail. The integrated voltage regulator for I/O banks simplifies the power tree but still requires a separate 2.5 V or 3.3 V supply depending on the I/O standard chosen.
Do not confuse the MAX 10 DF and DC variants - DF is the standard family with single analog block, while DC adds dual-configuration and enhanced analog. The same pin-out file works for both, but firmware/Quartus fitter settings differ. Also note that speed-grade 8 (C8) is slower than 7 (C7); if your timing closure fails at Fmax, switch to the C7 variant without any PCB changes. Always verify the device's commercial vs industrial temperature suffix matches your deployment environment.
Informations de conformité
RoHS and REACH compliant per Altera/Intel product declaration. Not AEC-Q100 qualified - select automotive-grade MAX 10 OPN for vehicle applications. Lead-free and halogen-free per JESD709 / IEC 61249-2-21.
