16-213SURC/S530-A3/TR8 - Red 624nm 0402 SMD Chip LED | Everlight
Référence : 16-213SURC/S530-A3/TR8 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0.0181 | $0,02 |
| 10 | $0.016 | $0,16 |
| 100 | $0.014 | $1,40 |
| 500 | $0.012 | $6,00 |
| 1 000 | $0.01 | $10,00 |
| 3 000 | $0.008 | $24,00 |
16-213SURC/S530-A3/TR8 Présentation
Chip LEDs in the 0402 form factor are a class of inorganic semiconductor light sources that use a GaAsP or AlGaInP die encapsulated in an epoxy lens. They belong to the broader hierarchy of optoelectronic devices, sit alongside through-hole LEDs, and serve as the visible-light signalling element of choice in modern consumer, industrial, and wearable electronics where board space is at a premium.
Key features of the 16-213SURC/S530-A3/TR8 include a peak wavelength at approximately 632 nm, low power consumption suited to battery-operated products, a wide operating temperature range supporting both consumer and industrial environments, and compatibility with 8 mm tape-and-reel packaging for fully automated pick-and-place assembly. The S530 chip family designation indicates a common die platform that Everlight produces across multiple color variants, simplifying second-source qualification.
From a system-design standpoint, the device integrates a single PN-junction die with an internal chip resistor, enabling direct drive from a current-limited source. Designers typically bias the LED through a series resistor sized for the supply rail and the desired luminous intensity, ensuring forward current stays within the absolute maximum ratings.
Typical applications include status indicators on portable electronics, backlighting of small keypads and membrane switches, wearable fitness bands, IoT sensor nodes, and decorative or warning indicators in space-constrained PCB assemblies. Everlight manufactures this family across hyper-red, red, amber, yellow, green, and blue variants, all sharing the same 0402 footprint for flexible design reuse.
When laying out a board for the 16-213SURC/S530-A3/TR8, observe standard SMD LED mounting practices: keep the cathode pad identifiable for polarity, route the indicator signal trace away from high-current switching nodes, and verify thermal behavior through the device's published soldering profile.
This page synthesizes distributor pricing, drop-in alternatives from the same Everlight 16-213 family, and practical design notes not found in the manufacturer datasheet, helping sourcing engineers select pin-compatible equivalents quickly and confidently.
Alternatives de remplacement direct pour 16-213SURC/S530-A3/TR8 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
16-213SURC/S530-A4/TR8
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
16-213SURC/S530-A2/TR8
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
19-213SURC/S530-A3/TR8
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
16-213SDRC/S530-A6/TR8
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
16-213SURC/S530-A3/TR8 Spécifications
| Manufacturer | Everlight Electronics Co., Ltd |
| Boîtier | 0402 (1005 Metric) |
| Type de montage | Surface Mount |
| Color | Red |
| Wavelength - Dominant | 624 nm |
| Forward Voltage (Typical) | 2.05 V |
| Lens Type | Water Clear |
| Package Height | 0.45 mm |
| Statut RoHS | Compliant (per LCSC and Mouser listings) |
| Packaging | Tape & Reel (TR8, 8 mm) |
| Configuration | Single Color LED, 2-Pin |
Configuration des broches de 16-213SURC/S530-A3/TR8
| Broche 1 | Anode — Positive terminal; marked with cathode bar tab on the opposite side of the package per Everlight datasheet |
| Broche 2 | Cathode — Negative terminal; identified by the bar-mark on the underside of the 0402 package |
Applications typiques
16-213SURC/S530-A3/TR8 convient pour 6 applications: Portable Consumer Status Indicators, Wearable Device Indicators, IoT Sensor Node Signalling, Backlighting for Keypads and Membrane Switches, Decorative and Warning Indicators in Space-Constrained PCBs, Test and Measurement Front Panels.
Portable Consumer Status Indicators
The 16-213SURC/S530-A3/TR8 suits portable consumer status indicators because its 0402 (1.0 x 0.5 mm) package and 0.45 mm height occupy minimal PCB area, freeing space for batteries and antennas. Operating from 2.05 V typical Vf, the LED pairs naturally with single-cell Li-ion (3.7 V) supplies through a 250-ohm series resistor at 5 mA. The red 624 nm output is highly visible in dim environments yet draws negligible current, extending battery life in devices like Bluetooth earbuds, remote controls, and handheld game controllers.
Recommandé
Wearable Device Indicators
For wearable fitness bands and smartwatches, the 16-213SURC/S530-A3/TR8's 0402 form factor enables placement inside sealed enclosures where height is critical. With a forward voltage around 2.05 V, the device can be PWM-dimmed directly from a 3.3 V MCU GPIO with an N-MOSFET current sink for variable brightness. The red wavelength penetrates fabric and skin better than blue or green, giving superior visibility through band materials. Designers should derate forward current to 5-10 mA for skin-contact scenarios to keep junction temperature rise within the S530 family's thermal envelope.
Recommandé
IoT Sensor Node Signalling
In battery-powered IoT sensor nodes, the 16-213SURC/S530-A3/TR8 serves as a fault or link-status indicator while drawing only the current set by its series resistor. Engineers can duty-cycle the LED at 1-5% with a GPIO, achieving average current below 100 uA and preserving months of battery life on a single coin cell. The 0402 package mounts on standard reflow profiles alongside the wireless module, and the red wavelength is detectable through translucent enclosures. For designs requiring UV or IR, consider a 0603 IR emitter in the same Everlight family.
Recommandé
Backlighting for Keypads and Membrane Switches
The 16-213SURC/S530-A3/TR8 provides reliable backlighting for membrane keypads and small tactile switch overlays in industrial control panels. Mounted on a flexible PCB tail, the 0402 footprint leaves room for multiple LEDs to illuminate individual keys without crowding. Through-hole LEDs would require an extra assembly step and consume more vertical space than is available under low-profile membrane switches. Pairing with a 1 kOhm series resistor from a 5 V rail keeps the indicator dim for nighttime visibility without glare.
Recommandé
Decorative and Warning Indicators in Space-Constrained PCBs
Engineers fitting warning indicators onto densely populated PCBs - like inside compact routers or set-top boxes - benefit from the 16-213SURC/S530-A3/TR8's 0.45 mm height and 0402 pad spacing. The red 624 nm wavelength reads as a clear "fault" signal in consumer electronics UX conventions and is highly visible in dark enclosures. The water-clear lens provides a narrow viewing angle suitable for through-bezel indication, and the part is compatible with standard Pb-free reflow profiles, allowing integration into existing SMT lines without process changes.
Recommandé
Test and Measurement Front Panels
In bench-top test equipment and laboratory instrumentation, the 16-213SURC/S530-A3/TR8 marks channel-active states on instrument front panels where multiple indicators share a small PCB strip. The 0402 footprint allows 0.5 mm pitch between adjacent LEDs - the minimum practical spacing for pick-and-place. With 2.05 V typical Vf, the device can be driven from 3.3 V or 5 V logic rails with a single resistor per channel, simplifying the analog front-end while remaining within the absolute maximum ratings shown in Everlight's datasheet.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 16-213SURC/S530-A3/TR8 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 16-213SURC/S530-A4/TR8 | 16-213SURC/S530-A2/TR8 | 19-213SURC/S530-A3/TR8 | 16-213SDRC/S530-A6/TR8 |
|---|---|---|---|---|---|
| Package | 0402 (1005 Metric) | 0402 (1005 Metric) - same | 0402 (1005 Metric) - same | 0402 (1005 Metric) - same | 0402 (1005 Metric) - same |
| Brand | Everlight | Everlight - same | Everlight - same | Everlight - same | Everlight - same |
| Color | Red 624 nm | Red 624 nm | Hyper Red ~626 nm | Red 624 nm | Deep Red ~660 nm |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
| Lens Type | Water Clear | Water Clear | Water Clear | Water Clear | Water Clear |
| Package Height | 0.45 mm | 0.45 mm | 0.45 mm | 0.45 mm | 0.45 mm |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant |
Principaux différenciateurs
- Industry-standard 0402 red 624 nm LED from a major-tier supplier (vs Generic no-name 0402 red LEDs)
- Wide distributor availability with same-day shipping (vs Long-lead specialty LED suppliers)
- Pin-compatible with the entire 16-213/19-213 S530 family (vs Different-family 0402 LEDs)
Notes de conception
Drive the 16-213SURC/S530-A3/TR8 with a series resistor sized for the supply rail: R = (Vsupply - Vf) / If. Estimated: at Vsupply=3.3V, Vf=2.05V, If=5mA, R ≈ 250 ohms (use 220R nearest E24). At Vsupply=5V, If=10mA, R ≈ 300 ohms. Never drive without a current-limiting element; absolute maximum forward current should be observed from the Everlight datasheet to avoid die damage.
At 10 mA forward current and 25°C ambient, the 16-213SURC/S530-A3/TR8 dissipates roughly 20 mW (P = Vf x If). The 0402 package has limited heat-sinking area, so keep continuous current below the recommended maximum and avoid placing thermal sources adjacent to the LED die. Estimated junction rise is below 5°C at the rated test current.
Land pattern should follow the 0402 chip LED footprint recommended in the datasheet (pads approximately 0.6 mm x 0.5 mm with 0.3 mm spacing). Keep solder paste deposit under 0.1 mm thickness to prevent solder-ball bridging across the small pad gap. Maintain a keep-out of 0.2 mm around the package for inspection and rework clearance.
Verify cathode polarity before board bring-up - the polarity on the underside bar-mark is small and easy to misread. Do not exceed the absolute maximum reverse voltage (typically 5 V for the S530 family); reverse bias above this rating degrades the die. When bending or flexing the PCB near the LED, keep mechanical stress below the manufacturer-recommended limits to avoid package cracking.
Informations de conformité
RoHS and lead-free status confirmed by LCSC and Mouser catalog listings. AEC-Q100/102 automotive qualification not specified on distributor pages - this part is targeted at consumer/industrial use. For automotive applications select the 67-213 series or higher-tier AEC-Q parts.
