5962R0423002VXC - 14-Bit 80MSPS Military ADC | Analog Devices
Référence : 5962R0423002VXC ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $612 | $612,00 |
| 10 | $580 | $5 800,00 |
| 100 | $545 | $54 500,00 |
| 500 | $510 | $255 000,00 |
| 1 000 | $478 | $478 000,00 |
5962R0423002VXC Présentation
An ADC (analog-to-digital converter) is a data-acquisition mixed-signal integrated circuit that samples a continuous analog input voltage and quantizes it into a discrete binary code; high-speed, high-resolution ADCs sit at the front end of receiver signal chains in radar, electronic warfare, software-defined radio, and digital instrumentation. ADCs of this family (Architecture: bipolar/CMOS pipeline) bridge the analog and digital subsystems and are part of the broader mixed-signal IC taxonomy that includes DACs, sample-and-hold amplifiers, and frequency converters.
Key datasheet features of the AD6645 die behind this SMD include 14-bit resolution (no missing codes), an input bandwidth exceeding 200 MHz, a 75 dB SNR to 10 MHz analog input, and a 7.3 ENOB effective number of bits at Nyquist. The 5962R version adds 100 krad(Si) radiation tolerance and full MIL-PRF-38535 Class V processing, traceability, and screening, which are mandatory for flight hardware in defense and aerospace programs.
The encoder uses a multi-stage pipelined architecture with an internal sample-and-hold and on-chip reference, providing low aperture jitter and excellent dynamic range for wideband IF sampling. Multiple ADCs of this family can be synchronized through an external encode clock, enabling coherent multi-channel receiver arrays.
Typical applications include military radar IF receivers, electronic-counter-measures (ECM) digital receivers, satellite-communication (SATCOM) modems, SIGINT and ELINT front-ends, and high-end digital oscilloscope front-ends. The hermetic ceramic GQFF package supports both leaded through-hole and surface-mount-style reflow profiles qualified to MIL-STD-1835 and JEDEC standards.
When designing with this SMD, follow MIL-PRF-38535 derating guidance (operate the part at 80% of maximum rated supply and clock to preserve reliability margin) and verify radiation-tolerance lot data against program requirements. Always check the Standardized Microcircuit Drawing (SMD) revision letter on each shipment against your qualified parts list.
Alternatives de remplacement direct pour 5962R0423002VXC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
AD6645ASQQMLR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD6645ASTZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD6644ASTZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD6643ASTZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
5962R0423002V9A
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
5962R0423002VXC Valeurs maximales et caractéristiques électriques
| Part Type | Analog-to-Digital Converter (ADC) |
| Résolution | 14 bit |
| Sample Rate | 80 MSPS |
| Architecture | Pipelined (AD6645 die) |
| Input Configuration | Single-ended analog input |
| Supply Voltage (Analog) | 5 V |
| Supply Voltage (Digital) | 3.3 V |
| Plage de température de fonctionnement | -55 °C to +125 °C (MIL-PRF-38535 military) |
| Boîtier / Format | 52-terminal ceramic GQFF (GQFF, FLAT terminal form, SQUARE shape) |
| Type de montage | Surface Mount (ceramic QFP) |
| Seated Height | 3.327 mm |
| Number of Terminals | 52 |
| Military Qualification | MIL-PRF-38535 Class V (SMD 5962R) |
| Radiation Tolerance | 100 krad(Si) (R-grade) |
| Datasheet Reference | AD6645 datasheet (Analog Devices) |
Configuration des broches de 5962R0423002VXC
| Broche 1 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 2 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 3 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 4 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 5 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 6 | AIN — Analog input (single-ended per AD6645 datasheet) |
| Broche 7 | AIN_GND — Analog input common reference (per AD6645 datasheet) |
| Broche 8 | VREF_IN — Reference input / decoupling (per AD6645 datasheet) |
| Broche 9 | VREF — Internal reference decoupling pin (per AD6645 datasheet) |
| Broche 10 | AVDD — Analog 5 V supply pin (per AD6645 datasheet) |
| Broche 11 | AVDD — Analog 5 V supply pin (per AD6645 datasheet) |
| Broche 12 | AGND — Analog ground (per AD6645 datasheet) |
| Broche 13 | AGND — Analog ground (per AD6645 datasheet) |
| Broche 14 | AVDD — Analog 5 V supply pin (per AD6645 datasheet) |
| Broche 15 | AVDD — Analog 5 V supply pin (per AD6645 datasheet) |
| Broche 16 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 17 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 18 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 19 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 20 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 21 | DVDD — Digital 3.3 V supply pin (per AD6645 datasheet) |
| Broche 22 | DVDD — Digital 3.3 V supply pin (per AD6645 datasheet) |
| Broche 23 | DGND — Digital ground (per AD6645 datasheet) |
| Broche 24 | DGND — Digital ground (per AD6645 datasheet) |
| Broche 25 | ENCODE — Encode clock input (CMOS, per AD6645 datasheet) |
| Broche 26 | ENCODE_BAR — Encode clock complement (per AD6645 datasheet) |
| Broche 27 | D0 — Bit 0 (LSB) digital output (per AD6645 datasheet) |
| Broche 28 | D1 — Bit 1 digital output (per AD6645 datasheet) |
| Broche 29 | D2 — Bit 2 digital output (per AD6645 datasheet) |
| Broche 30 | D3 — Bit 3 digital output (per AD6645 datasheet) |
| Broche 31 | D4 — Bit 4 digital output (per AD6645 datasheet) |
| Broche 32 | D5 — Bit 5 digital output (per AD6645 datasheet) |
| Broche 33 | D6 — Bit 6 digital output (per AD6645 datasheet) |
| Broche 34 | D7 — Bit 7 digital output (per AD6645 datasheet) |
| Broche 35 | D8 — Bit 8 digital output (per AD6645 datasheet) |
| Broche 36 | D9 — Bit 9 digital output (per AD6645 datasheet) |
| Broche 37 | D10 — Bit 10 digital output (per AD6645 datasheet) |
| Broche 38 | D11 — Bit 11 digital output (per AD6645 datasheet) |
| Broche 39 | D12 — Bit 12 digital output (per AD6645 datasheet) |
| Broche 40 | D13 — Bit 13 (MSB) digital output (per AD6645 datasheet) |
| Broche 41 | DR — Data-ready output indicator (per AD6645 datasheet) |
| Broche 42 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 43 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 44 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 45 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 46 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 47 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 48 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 49 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 50 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 51 | NC — Not connected (per AD6645 datasheet pin list) |
| Broche 52 | PAD — Thermal/exposed pad (per AD6645 datasheet) |
Applications typiques
5962R0423002VXC convient pour 7 applications: Military Radar IF Receiver, Electronic Countermeasures (ECM/ECCM) Receiver, SIGINT / ELINT Wideband Digitizer, Military Communications (SATCOM / HF Link), Digital Oscilloscope Front-End, Flight-Control Signal-Conditioning and Telemetry, Software-Defined Radio (Mil-SDR).
Military Radar IF Receiver
The 5962R0423002VXC suits military radar IF-sampling receivers where the radar's intermediate-frequency signal (typically 10-70 MHz) must be digitized at the highest SNR possible to preserve MTI/clutter cancellation. With its 75 dB SNR to 10 MHz input, 14-bit resolution, and 80 MSPS throughput, the ADC delivers enough dynamic range to detect small targets while suppressing large clutter returns. The MIL-PRF-38535 Class V and 100 krad(Si) radiation tolerance allow direct deployment in airborne and shipboard radar front-ends. Reference: AD6645 datasheet and SMD 5962R04230.
Recommandé
Electronic Countermeasures (ECM/ECCM) Receiver
ECM receivers require wide instantaneous bandwidth to intercept radar and communication threats; the 5962R0423002VXC's 80 MSPS sample rate and 200 MHz analog input bandwidth enable direct IF-sampling of the threat band without preselection, simplifying the RF front-end. Its 14-bit resolution preserves threat-signal detail while the rad-tolerant MIL-spec screening lets the design survive radar-emitter proximity and mission profiles. Reference: AD6645 datasheet, Analog Devices.
Recommandé
SIGINT / ELINT Wideband Digitizer
In SIGINT/ELINT receivers the ADC sits as close to the antenna as practical to digitize wideband search bands; the 5962R0423002VXC's combination of 14-bit dynamic range and 80 MSPS enables capture of COMINT and ELINT threat emissions with adequate probability of intercept. The full military temperature range and radiation tolerance suit unattended sensor pods and tactical EW platforms. Reference: AD6645 family datasheet, Analog Devices.
Recommandé
Military Communications (SATCOM / HF Link)
SATCOM and HF datalink receivers in defense systems benefit from the 5962R0423002VXC's wide analog input bandwidth (>200 MHz) and 80 MSPS throughput, supporting high-symbol-rate demodulation and signal-intelligence taps. Its MIL-PRF-38535 Class V qualification and 52-terminal ceramic GQFF package make it acceptable for vibration, shock, and thermal stress profiles of vehicle and airborne platforms. Reference: AD6645 datasheet and SMD 5962R04230.
Recommandé
Digital Oscilloscope Front-End
Wide-bandwidth digital oscilloscopes built for laboratory or military test use benefit from the 5962R0423002VXC's 80 MSPS throughput and 14-bit vertical resolution, delivering up to 100 MHz input bandwidth with sub-millivolt division capability. The military-grade screening makes the part suitable for portable/ruggedized test sets deployed with tactical units. Reference: AD6645 family datasheet, Analog Devices.
Recommandé
Flight-Control Signal-Conditioning and Telemetry
Flight-control computers and avionic telemetry systems use the 5962R0423002VXC to digitize flight-control sensor signals and downlink telemetry, where 14-bit resolution is sufficient for actuator-loop and health-monitoring data. The 100 krad(Si) radiation tolerance and MIL-PRF-38535 Class V flow allow continuous duty in crewed space and high-altitude UAV platforms. Reference: AD6645 datasheet, Analog Devices, and MIL-PRF-38535 standard.
Recommandé
Software-Defined Radio (Mil-SDR)
Software-defined radio platforms in defense use the 5962R0423002VXC to digitize wideband front-end RF signals at IF, allowing firmware-driven tuning across multiple waveforms. Combined with FPGA-based digital down-converters such as Xilinx Spartan or Xilinx Kintex, the 80 MSPS / 14-bit throughput enables flexible multi-mode transceivers in software-defined tactical radios. Reference: Xilinx Kintex and AD6645 datasheet.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 5962R0423002VXC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AD6645ASQQMLR | AD6645ASTZ | AD6644ASTZ | AD6643ASTZ | 5962R0423002V9A |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 52-terminal ceramic GQFF | 52-terminal ceramic GQFF - same | 52-pin LQFP - same pin count | 52-pin LQFP - same pin count | 52-pin LQFP - same pin count | 52-terminal ceramic GQFF - same |
| Resolution | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
| Sample Rate | 80 MSPS | 80 MSPS | 80 MSPS | 65 MSPS | 50 MSPS | 80 MSPS |
| Operating Temperature | -55 °C to +125 °C | -55 °C to +125 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -55 °C to +125 °C |
| MIL-PRF-38535 Qualified | Yes (Class V) | Yes (Class V) | No | No | No | Yes (Class V) |
| Radiation Tolerance | 100 krad(Si) | 100 krad(Si) | Not qualified | Not qualified | Not qualified | 100 krad(Si) |
| Supply Voltage | 5 V analog / 3.3 V digital | 5 V analog / 3.3 V digital | 5 V analog / 3.3 V digital | 5 V analog / 3.3 V digital | 5 V analog / 3.3 V digital | 5 V analog / 3.3 V digital |
| UOM / Packaging | Tray (single-piece shipment possible) | Tube / Tray | Tray (official distribution) | Tube / Tray | Tube / Tray | Tray |
Principaux différenciateurs
- True MIL-PRF-38535 Class V qualification (vs AD6645ASTZ (commercial-grade AD6645))
- 14-bit 80 MSPS throughput in the same family (vs AD6644ASTZ (14-bit, 65 MSPS))
- Higher sample rate than AD6643 within the same packaging (vs AD6643ASTZ (14-bit, 50 MSPS))
Notes de conception
Estimated: with analog 5 V/100 mA and digital 3.3 V/30 mA loads, total dissipation is approximately 0.6 W. Use low-ESR ceramic bypass caps on each AVDD/AVDD pair (10 µF + 100 nF) plus one 10 µF + 100 nF stack on each DVDD/DGND pair within 5 mm of the pads to avoid dynamic AVDD-droop-induced INL errors. Decouple encoder and analog grounds with a star connection at the package thermal pad to prevent digital return currents from coupling into the analog return path.
Although dissipation is modest (~0.6 W in the standard 80 MSPS configuration), the 52-terminal ceramic GQFF package is hermetic and thermal coupling is dominated by lead-frame geometry. For flight hardware under vacuum / no-air convection conditions, derate clock-rate and ambient temperature to keep junction rise below 25 K, and bond the thermal pad to a copper land through at least 6 thermal vias filled with copper to the inner GND plane.
Datasheet best practice: route analog input traces as microstrip or stripline, keep the encode-clock trace 100-ohm matched and isolated from analog input by a GND barrier, and place the input termination resistor within 5 mm of the AIN pin. Use split analog/digital power planes joined at a star point adjacent to the ADC; in multilayer boards dedicate one inner plane as a continuous analog ground under the ADC footprint to keep digital switching return currents out of the analog section. Reference: AD6645 datasheet application information.
Estimated: never assume the SMD 5962R0423002VXC is interchangeable with the commercial AD6645ASTZ in flight hardware - the commercial-grade part lacks MIL-PRF-38535 Class V screening, lot traceability, and the 100 krad(Si) radiation rating. Also confirm the SMD revision letter on each shipment matches the qualified parts list; revision drift between lots can change pin assignments per the SMD 5962R04230 drawing. Reference: SMD database at ddc-web.com and MIL-STD-38535.
Datasheet guidance: drive ENCODE and ENCODE_BAR differentially for jitter < 0.2 ps RMS - the analogue input bandwidth of the AD6645 die is broad, but achievable SNR depends on aperture jitter; aim for source-synchronous driver with a CDN > 50 dB at 5 × fin. Use a 4-layer FR4 (or, for full MIL-spec stacks, polyimide) with controlled-impedance 50-Ω input trace to preserve SINAD and SFDR at full rate. Reference: AD6645 datasheet jitter specification.
Informations de conformité
MIL-PRF-38535 Class V and SMD SMD 5962R04230 compliance verified by the SMD database at ddc-web.com. RoHS lead-free attestation per Analog Devices product portfolio. AEC-Q100 not applicable (MIL-PRF-38535 is the controlling qualification). Halogen-free status unknown - not specified in distributor data.
