A3P015-2QNG68 - 15K Gate ProASIC3 FPGA | Microchip Technology
Référence : A3P015-2QNG68 ✓ ActifA3P015-2QNG68 Présentation
A field-programmable gate array, or FPGA, is a programmable digital integrated circuit in which look-up tables, flip-flops, routing networks, and dedicated I/O resources are configured after manufacture. Within the broader semiconductor hierarchy, an FPGA belongs to the programmable-logic IC family alongside complex programmable logic devices. It replaces a large quantity of discrete gates with one reconfigurable device, allowing product revisions, field updates, and prototype changes without respinning the PCB.
The A3P015 part provides 15,000 equivalent gates, 384 logic array blocks, and 49 user I/O pins in an 8 mm by 8 mm VFQFN package. Configuration flash permits the logic design to be retained and reprogrammed in the field. The single 1.425 V to 1.575 V operating supply reduces the number of external rails required in low-voltage systems, while the exposed pad supports improved package-level heat transfer when the device operates at high utilization.
The ProASIC3 architecture combines programmable logic with dedicated resources for interface-oriented designs. Its I/O count makes the device suitable for bus bridges, peripheral controllers, data acquisition front ends, and industrial control modules where the number of external signals exceeds what a smaller programmable-logic package can offer. The 49 I/O pins also allow more parallel data and control paths to be implemented than the internal gate count alone would suggest.
Typical uses include industrial instrumentation, communications equipment, test and measurement systems, embedded control, and compact data-processing modules. In these applications, the device can implement control logic, state machines, data formatting, protocol interfaces, and timing functions in a single package. Its relatively small body size also supports use in boards where an older parallel FPGA package would be difficult to route.
PCB design should preserve the exposed-pad connection specified in the manufacturer footprint and provide a low-impedance core supply with local decoupling. Because the operating supply is narrow, supply routing and transient control deserve close attention. Confirm the selected configuration file, pin assignments, and package drawing against the manufacturer documentation before releasing a PCB layout.
This page combines device specifications, verified distributor listings, same-package replacement options, and implementation guidance in a format useful for both schematic capture and sourcing. It also identifies the electrical and package details that should be reviewed when migrating an existing ProASIC3 design to the A3P015-2QNG68.
Alternatives de remplacement direct pour A3P015-2QNG68 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec A3P015-2QNG68 (même facteur de forme et même empreinte) — différant par Process Technology, Package Dimensions, Configuration Memory, Core Supply Voltage, Device Type.
A3P015-1QNG68
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →A3P015-QNG68
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P015-QNG68I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P015-2QNG68I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P015-QNG68Y
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P015-2QNG68YI
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P015-2QNG68 Valeurs maximales et caractéristiques électriques
| Device Type | ProASIC3 flash-based FPGA |
| Typical System Gates | 15,000 gates |
| Logic Array Blocks | 384 LABs |
| User I/O Pins | 49 I/O |
| Core Operating Supply | 1.425 V to 1.575 V |
| Process Technology | CMOS |
| Package Type | 68-pin VFQFN with exposed pad |
| Package Dimensions | 8 mm x 8 mm |
| Nombre de broches | 68 pins |
| Type de montage | Surface mount |
| Configuration Memory | Embedded flash |
| Speed Grade | Grade 2 |
| Packaging | Tray |
Guide de configuration des broches du A3P015-2QNG68 8 mm x 8 mm
Configuration des broches du A3P015-2QNG68 (boîtier 8 mm x 8 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour A3P015-2QNG68.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
A3P015-2QNG68 convient pour 6 applications: Industrial Instrumentation and Data Acquisition, Communication Protocol Bridging, Embedded Control and Sequencing, Test and Measurement Equipment, Network and Storage Interface Cards, LED Display and Illumination Control.
Industrial Instrumentation and Data Acquisition
The A3P015-2QNG68 suits compact instrumentation modules that must coordinate sensors, converters, and communications logic. Its 49 user I/O pins provide parallel channels for digital sensor inputs, control outputs, status indicators, and serial-interface multiplexing, while 384 logic array blocks implement acquisition sequencing, calibration tables, filtering, and data packing. The 1.425 V to 1.575 V single-supply operation simplifies low-voltage analog and digital partitioning. In an 8 mm by 8 mm VFQFN package, the device leaves board area for precision components, although the exposed pad and controlled supply routing remain essential.
Recommandé
Communication Protocol Bridging
The A3P015-2QNG68 can bridge parallel processor buses to slower serial or parallel peripherals by implementing framing, byte alignment, checksums, and flow control in programmable logic. Its 49 I/O pins allow multiple buses and control signals to be supported simultaneously without requiring a large gate-count package. The 15,000-gate ProASIC3 resource level is appropriate for fixed-function protocol conversion rather than processor-intensive workloads. Design the clocking and I/O standards to match the target interfaces, and confirm achievable timing from the manufacturer device documentation for each supported I/O mode.
Recommandé
Embedded Control and Sequencing
The A3P015-2QNG68 is well suited to deterministic control logic that coordinates sensors, actuators, timers, and fault handling. Its 384 logic array blocks can implement state machines, counters, interlocks, and arithmetic helpers while 49 I/O pins connect directly to external control lines. Embedded flash configuration supports design revision and field programming within the ProASIC3 development flow. For motor-adjacent or safety-related control, keep the programmable logic separated from protection circuitry and verify all timing against the grade 2 device characteristics before production.
Recommandé
Test and Measurement Equipment
The A3P015-2QNG68 can implement digital acquisition, pattern generation, and instrument control functions in a compact test-and-measurement product. The 49 user I/O pins support parallel data capture, trigger routing, and fixture-control signals, while the programmable architecture permits instrument-specific sequencing to be updated without changing the PCB. Use dedicated external memory only when the design exceeds the device's internal resources, and place memory close to the relevant I/O banks to limit routing delay. The exposed-pad land pattern must remain continuous to provide a low-impedance return path.
Recommandé
Network and Storage Interface Cards
The A3P015-2QNG68 can serve as a low-power interface controller for network adapters, data buffers, and storage-facing modules that need nonvolatile configuration and reconfigurable logic. Its 49 I/O pins provide parallel channels for command, address, and data-path interfacing, while 384 logic array blocks can host FIFOs, parity logic, and protocol translators. Because it is a flash-programmable FPGA rather than a hardwired ASIC, firmware-related interface updates can be made without PCB respins. Confirm the supported I/O standards and timing in the manufacturer datasheet for the exact speed suffix.
Recommandé
LED Display and Illumination Control
The A3P015-2QNG68 can drive display scanning, pixel timing, brightness tables, and synchronization logic in LED-based modules. Its 49 I/O pins permit multiple display rows, column multiplexing signals, and control lines to be managed by one programmable device. The 15,000-gate capacity is suitable for moderate-resolution controllers with local character generation or calibration functions rather than extremely high pixel counts. External drivers are required for current and power handling, so keep high-current switching loops separate from sensitive logic and follow the recommended decoupling and grounding layout.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour A3P015-2QNG68 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | A3P015-1QNG68 | A3P015-QNG68 | A3P015-QNG68I | A3P015-2QNG68I | A3P015-QNG68Y | A3P015-2QNG68YI |
|---|---|---|---|---|---|---|---|
| Package | 68-VFQFN Exposed Pad, 8 mm x 8 mm | 68-VFQFN Exposed Pad, 8 mm x 8 mm | 68-VFQFN Exposed Pad, 8 mm x 8 mm | 68-VFQFN Exposed Pad, 8 mm x 8 mm | 68-VFQFN Exposed Pad, 8 mm x 8 mm | 68-VFQFN Exposed Pad, 8 mm x 8 mm | 68-VFQFN Exposed Pad, 8 mm x 8 mm |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 |
| Typical System Gates | 15,000 gates | 15,000 gates | 15,000 gates | 15,000 gates | 15,000 gates | 15,000 gates | 15,000 gates |
| Logic Array Blocks | 384 LABs | 384 LABs | 384 LABs | 384 LABs | 384 LABs | 384 LABs | 384 LABs |
| User I/O | 49 I/O | 49 I/O | 49 I/O | 49 I/O | 49 I/O | 49 I/O | 49 I/O |
| Speed or Qualification Suffix | Grade 2 | Grade 1 | Speed suffix not specified | Industrial grade | Grade 2, industrial grade | Alternative qualification suffix | Grade 2 with Y and I suffixes |
| Configuration Memory | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Principaux différenciateurs
- Grade 2 timing option (vs A3P015-1QNG68)
- Industrial-grade same-footprint option (vs A3P015-QNG68)
- Direct grade 2 industrial alternative (vs A3P015-2QNG68I)
- Higher qualification flexibility than the base device (vs A3P015-QNG68Y)
Notes de conception
Use the manufacturer land-pattern drawing for the 68-VFQFN exposed-pad package. The pad is not a user I/O and should be connected to the appropriate ground plane according to the package documentation. Maintain short supply and ground paths, place decoupling capacitance near the device pins, and route high-current or inductive external circuitry away from sensitive logic. Because the verified device dimensions are 8 mm by 8 mm, verify pad length, width, pitch, and solder-mask clearance rather than substituting a generic 68-pin QFN footprint.
The A3P015-2QNG68 operates from a narrow 1.425 V to 1.575 V core-supply range. Design the regulator so its tolerance, startup ramp, and load transient remain inside that window over temperature. Place the recommended bypass capacitors at the associated power pins and keep the supply plane continuous beneath the device. Validate the rail with an oscilloscope during maximum logic activity, because an apparently clean nominal voltage can still exceed the permitted tolerance during simultaneous switching.
The exposed pad provides the primary thermal path from the FPGA to the PCB. Preserve the recommended via pattern beneath the pad and avoid cutting the ground reference with keepouts or routing channels. Actual junction temperature depends on logic utilization, I/O switching activity, ambient temperature, and copper area, so it must be measured in the assembled system. Use board-level thermal simulation or equivalent estimates when the device is expected to sustain high utilization in a confined enclosure.
Do not substitute A3PN015-2QNG68 for the A3P015-2QNG68 based only on the similar 68-pin package name. The ProASIC3 nano family has a different architecture and I/O organization, so pinout, constraints, timing, and programming-flow compatibility must be verified. When changing among A3P015 suffixes, separately review speed grade, temperature grade, exposed-pad treatment, and device identification. A physically identical footprint does not by itself prove that a design has been fully qualified.
Informations de conformité
The available product information identifies the package, logic resources, voltage range, and mounting method but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. These fields require confirmation from the manufacturer declaration or material-compliance documentation for the exact A3P015-2QNG68 ordering code.