A42MX09-PLG84M - 14K-Gate 5V MX FPGA, 84-PLCC | Microchip
Référence : A42MX09-PLG84M ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
A42MX09-PLG84M Présentation
An FPGA (Field Programmable Gate Array) is a type of programmable logic device that can be configured by the designer after manufacturing, sitting within the broader hierarchy of programmable logic: SPLD/CPLD -> FPGA -> structured ASIC -> standard-cell ASIC. Microchip's MX (Actel antifuse-based) families provide a reliable, single-chip solution that shortens design cycles while offering high performance in high-volume production.
Key features of the MX family include an efficient, flexible 5.0V architecture, antifuse interconnect for non-volatile configuration and high immunity to configuration upset, and single-chip integration that eliminates the need for external configuration devices such as PROMs or flash memory. The 84-PLCC (J-lead) package is widely used in through-hole-era boards converted to surface mount, and its gull-wing-free J-lead form factor offers good mechanical robustness and easy solder-joint inspection.
The MX architecture provides dedicated routing resources and predictable, ASIC-like timing behavior, making it suitable for glue logic consolidation, legacy PLD integration, and embedded control in industrial and military/aerospace systems. The A42MX09 combines 9,000 usable logic capacity (14K system gates) with 5V-tolerant I/O, which is a critical differentiator when interfacing with older 5V TTL/CMOS buses that modern 3.3V or 1.8V FPGAs cannot safely connect to.
Typical applications include industrial control boards, avionics and defense systems requiring mature, fully characterized silicon, communication backplane glue logic, and consolidation of multiple legacy PAL/GAL/CPLD devices into a single low-cost device.
When designing with the A42MX09, verify speed-grade and temperature-range suffix codes against the datasheet, and confirm the 5V supply architecture matches your board power tree, since newer MX variants support dual 3.3V/5.0V operation. Because the device is antifuse-based, programming is one-time - finalize your design in Libero SoC before committing hardware.
Alternatives de remplacement direct pour A42MX09-PLG84M — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec A42MX09-PLG84M (même facteur de forme et même empreinte) — différant par Package, Family, System Gates, Technology, Mounting Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
A42MX09-3PLG84
✅ Remplacement direct✓ En stock
$22.8 / unité
Voir la fiche technique →A42MX09-2PLG84
✅ Remplacement direct✓ En stock
$23.9 / unité
Voir la fiche technique →A42MX09-PLG84
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A42MX09-FPLG84M
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A42MX09-PL84
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
A1240A-PL84I
⚡ Même boîtier📋 Alternative de référence (hors catalogue)
A42MX09-PLG84M Valeurs maximales et caractéristiques électriques
| Family | MX (Actel 42MX) |
| System Gates | 14000 |
| User I/O | 72 |
| Core Supply Voltage | 5.0 V |
| I/O Supply Voltage | 5 V |
| Boîtier | 84-LCC (J-Lead) PLCC-84 |
| Type de montage | Surface Mount |
| Configuration Type | Antifuse (one-time programmable) |
| Technology | 1.0 um CMOS antifuse |
| Programming Tool | Microchip Libero SoC |
Configuration des broches de A42MX09-PLG84M
| Broche 1 | I/O — User input/output (assign per Libero SoC pin table) |
| Broche 11 | VCC — 5.0V core supply |
| Broche 42 | GND — Ground |
| Broche [DATA_NEEDED] | CLK — Dedicated clock input - see datasheet PLCC-84 pin table |
| Broche [DATA_NEEDED] | MODE — Programming mode control - see datasheet |
| Broche [DATA_NEEDED] | DATA — Programming data input - see datasheet |
Applications typiques
A42MX09-PLG84M convient pour 6 applications: Legacy PLD Consolidation, Industrial Control Systems, Defense and Avionics Hardware, Communication Backplane Glue Logic, Test and Measurement Instrumentation, ASIC Prototyping and Low-Volume Bridge.
Legacy PLD Consolidation
The A42MX09's 14K system gates allow multiple legacy PAL, GAL, and 22V10 devices to be merged into a single MX FPGA, reducing board area, BOM count, and assembly cost. Its 5.0V I/O directly connects to older TTL/CMOS buses that modern 3.3V FPGAs cannot safely interface with. Because MX uses antifuse configuration, no external boot PROM is required, preserving the single-chip simplicity of the original PLD designs. At up to 72 user I/O in an 84-PLCC footprint, the device comfortably hosts typical multi-PLD address decoding and bus-control logic.
Recommandé
Industrial Control Systems
Industrial controllers often retain 5V backplanes and sensors, and the A42MX09's 5.0V architecture eliminates level-shifting circuitry, reducing parts count and improving noise margins in electrically harsh factory environments. The antifuse interconnect provides deterministic, ASIC-like timing after programming, which simplifies worst-case timing analysis for interlock and sequencing logic. The 84-PLCC J-lead package is mechanically robust and compatible with long-standing industrial SMT processes, making the MX09 a low-risk fit for control boards with multi-year production lifecycles.
Recommandé
Defense and Avionics Hardware
Mature defense and avionics platforms frequently specify MX FPGAs because the silicon is fully characterized, change-controlled, and supports extended-temperature suffix options. Antifuse configuration cannot be flipped by radiation-induced configuration upsets in the same manner as SRAM FPGAs, improving configuration reliability in flight environments. The M-suffix A42MX09-PLG84M targets these extended-range applications, and the 72 I/O / 14K-gate capacity typically covers command decoding, telemetry multiplexing, and bus-interface glue logic on legacy mil-spec boards.
Recommandé
Communication Backplane Glue Logic
Telecom and datacom backplanes built around 5V TTL signaling historically used MX FPGAs for slot addressing, bus arbitration, and status aggregation. The A42MX09 provides 72 I/O with predictable timing, letting designers close timing on multi-drop backplane buses without extensive constraint work. Single-chip antifuse integration removes configuration PROMs from the BOM, improving field reliability, and the PLCC-84 package supports board designs dating to the original 5V backplane era while remaining available for service and repair programs.
Recommandé
Test and Measurement Instrumentation
Bench instruments and automated test fixtures benefit from the MX09's deterministic post-programming timing, since fixture logic must deliver repeatable strobe and handshake behavior across units. Its 5V I/O connects directly to legacy instrument buses and DUT interfaces that cannot tolerate 3.3V logic levels. With 14K gates, the device implements state machines, counter/timer functions, and address decode for fixture control, while the 84-PLCC through-hole-compatible J-lead footprint simplifies prototyping and repair on existing fixture boards.
Recommandé
ASIC Prototyping and Low-Volume Bridge
MX FPGAs serve as a low-risk bridge between prototyping and production for ASIC-like logic: Microchip positions the MX family as a single-chip ASIC alternative for high volumes, and the same design netlist can move from FPGA verification to antifuse production without SRAM configuration concerns. The A42MX09's 14K gates suit small datapath and control blocks, and the locked-in antifuse programming gives ASIC-like security for IP protection. Designers prototype in Libero SoC, then commit the verified design to one-time-programmed production units.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour A42MX09-PLG84M — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | A42MX09-3PLG84 | A42MX09-2PLG84 | A42MX09-FPLG84M |
|---|---|---|---|---|
| Package | 84-PLCC (PLG84) | 84-PLCC - same | 84-PLCC - same | 84-PLCC - same |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 14000 | 14000 | 14000 | 14000 |
| User I/O | 72 | 72 | 72 | 72 |
| Core Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Configuration | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) |
| Temperature Range | M suffix (extended/mil per Microchip coding) | Commercial | Commercial | Per M suffix coding |
Principaux différenciateurs
- Extended-temperature M-suffix option (vs A42MX09-3PLG84)
- Single-chip antifuse configuration (vs A1240A-PL84I)
- Native 5.0V I/O architecture (vs A42MX09-3PLG84)
Notes de conception
The A42MX09 operates from a 5.0V supply. Provide bulk (10uF+) and local (0.1uF) decoupling at each VCC/GND pin pair of the 84-PLCC package. Do not substitute a 3.3V rail: unlike some MX variants that support dual 3.3V/5.0V operation, this 5V-architecture device requires the correct supply per the datasheet power pin table. Verify inrush on hot-swap boards since antifuse FPGAs draw no configuration current but I/O loads may switch simultaneously.
MX antifuse devices are one-time programmable. A design change after programming requires a new physical device, so complete simulation and timing verification in Microchip Libero SoC before programming production units. Additionally, do not confuse speed-grade and temperature suffix codes: the M suffix in A42MX09-PLG84M encodes a specific speed/temperature combination that must be verified against the Microchip ordering-code table before substituting -2, -3, or I-suffix parts.
The 84-PLCC (J-lead) package uses leads along all four sides that must not be soldered rigidly to relieve thermal expansion stress; use standard PLCC land patterns per IPC guidance and avoid routing traces under the package body without solder mask. J-lead joints are inspectable with AOI, and PLCC sockets (including PLCC-to-DIP adapters) are available for prototyping - but note sockets add inductance and are unsuitable for high-speed clocking above roughly 50 MHz.
Informations de conformité
[DATA_NEEDED]: RoHS/REACH/lead-free status not present in provided web data - confirm on Microchip product page or MicrochipUSA listing.
