AD723ARUZ - 2.7V to 5.5V RGB-to-NTSC/PAL Encoder | Analog Devices
Référence : AD723ARUZ ✓ ActifAD723ARUZ Présentation
A video encoder is an interface IC that converts separate RGB color components into a composite video signal. In the signal-chain hierarchy, the AD723 sits between RGB source circuitry and an NTSC or PAL video output stage. It replaces discrete color-matrix and modulation circuitry with a dedicated encoder IC while remaining compatible with conventional analog video architectures used in cameras, internet appliances, and set-top boxes.
Key characteristics of the AD723ARUZ include a 2.7 V to 5.5 V operating supply range, support for 28-lead TSSOP mounting, separate optimized video outputs, and a load-detect function for source management. The input termination switch provides a hardware mechanism for controlling source impedance, while the YTRAP option can suppress unwanted subcarrier-related cross-color information when the video source characteristics require it.
The AD723 is designed around analog composite-video generation rather than digital pixel processing. Its RGB inputs are therefore intended for analog red, green, and blue signals with amplitudes compatible with the device's internal matrix and modulation circuits. The encoder produces luminance and chrominance information for either NTSC or PAL operation, with the selected color system configured through the device's operating mode.
Typical uses include analog camera modules, video surveillance equipment, internet appliances, set-top boxes, and other legacy composite-video products. These applications benefit from a dedicated encoder that combines RGB conversion, chrominance generation, load detection, and source termination control in one package instead of requiring those functions to be implemented with discrete analog components.
PCB layout should keep RGB and video output routing compact and controlled, with attention to grounding and the manufacturer's recommended pin assignments. The 28-lead TSSOP package has a fine lead pitch, so assembly should follow the recommended land pattern and the manufacturer's soldering profile. Confirm the selected NTSC or PAL configuration, termination state, and YTRAP setting against the application schematic before production release.
Alternatives de remplacement direct pour AD723ARUZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
AD723ARU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD723ARUZ Valeurs maximales et caractéristiques électriques
| Product Type | RGB-to-NTSC/PAL composite video encoder |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Input Signal Type | Analog red, green, and blue color components |
| Supported Video Standards | NTSC and PAL |
| Boîtier | 28-lead TSSOP |
| Nombre de broches | 28 pins |
| Type de montage | Surface mount |
| Case Dimensions | 0.173 in (4.40 mm) width |
| Integrated Features | Load detect, input termination switch, and optional luminance trap |
| Luminance Trap | Optional YTRAP function |
| Video Outputs | Separate luminance and chrominance outputs |
| Primary Applications | Cameras, internet appliances, and set-top boxes |
Guide de configuration des broches du AD723ARUZ 0.173 in (4.40 mm) width
Configuration des broches du AD723ARUZ (boîtier 0.173 in (4.40 mm) width). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour AD723ARUZ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AD723ARUZ convient pour 6 applications: Analog Camera Modules, Video Surveillance Equipment, Internet Appliances, Set-Top Boxes, Video Test and Measurement Equipment, Industrial Video Control Panels.
Analog Camera Modules
The AD723ARUZ fits analog camera electronics that produce separate red, green, and blue component signals and require a composite-video output. Its 2.7 V to 5.5 V supply range accommodates low-voltage camera designs, while the integrated load-detect and input-termination functions can simplify source-management requirements at the encoder input. The optional YTRAP function helps reduce cross-color artifacts when subcarrier-related information appears in the luminance signal. Use the manufacturer's application circuit to establish resistor values, RGB input amplitudes, synchronization connections, and the selected NTSC or PAL operating mode.
Recommandé
Video Surveillance Equipment
The AD723ARUZ can convert analog RGB camera outputs into NTSC or PAL composite video for surveillance displays and recording equipment. Its 28-lead TSSOP package keeps the encoder compact, and the 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V system architectures. Load detection provides a hardware indication of the connected source state, while the termination switch helps control source loading. The design should follow the manufacturer's grounding and output-network guidance to preserve composite-video quality in long cable runs.
Recommandé
Internet Appliances
Legacy internet appliances commonly route analog RGB graphics or video through a composite output, making the AD723ARUZ suitable for that signal path. The device combines RGB-to-NTSC/PAL conversion with source load detection and termination control in one 28-lead TSSOP package. Its low-voltage 2.7 V to 5.5 V operating range reduces the need for a separate encoder supply rail. Designers should confirm sync compatibility, color-system configuration, and output levels against the manufacturer application information before integrating a replacement into an existing appliance board.
Recommandé
Set-Top Boxes
The AD723ARUZ is directly applicable to set-top box output stages that generate composite NTSC or PAL video from analog RGB sources. Its integrated termination switch and load detection reduce the need for separate source-control circuitry close to the encoder. The 2.7 V to 5.5 V range supports common set-top box supply rails, and the 28-lead TSSOP package allows a compact layout. Apply the manufacturer's recommended bypass placement and video-output network, and verify the exact NTSC or PAL configuration for each regional product variant.
Recommandé
Video Test and Measurement Equipment
The AD723ARUZ can be used in analog video test equipment that needs to convert an RGB source into a composite reference signal. Its separate luminance and chrominance outputs allow the test architecture to observe the two composite components independently, while the optional YTRAP function provides control over cross-color artifacts in the luminance path. The 2.7 V to 5.5 V supply range makes the device practical for portable or bench-based instruments. Use controlled source amplitudes and the manufacturer's termination settings to obtain repeatable measurements.
Recommandé
Industrial Video Control Panels
Industrial control panels with analog RGB displays can use the AD723ARUZ to generate an NTSC or PAL composite-video feed. The device's integrated load detection and input termination control support more predictable source connections than a passive RGB-to-video matrix alone. Its compact 28-lead TSSOP package and 2.7 V to 5.5 V supply range suit space-constrained industrial electronics. Protect the analog signal path from switching-node and high-current traces, and validate the composite output against the display and cable length used in the final installation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AD723ARUZ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AD723ARU |
|---|---|---|
| Package | 28-lead TSSOP | 28-lead TSSOP |
| Brand | Analog Devices | Analog Devices |
| Product Type | RGB-to-NTSC/PAL composite video encoder | RGB-to-NTSC/PAL composite video encoder |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Input Signals | Analog red, green, and blue components | Analog red, green, and blue components |
| Output Signals | Separate luminance and chrominance outputs | Separate luminance and chrominance outputs |
| Video Standards | NTSC and PAL | NTSC and PAL |
| Input Termination | Integrated input termination switch | Integrated input termination switch |
| Source Detection | Integrated load detect | Integrated load detect |
| Luminance Trap | Optional YTRAP function | Optional YTRAP function |
| Mounting Type | Surface mount | Surface mount |
Principaux différenciateurs
- Combines RGB conversion and source-management functions (vs AD723ARU)
- Supports both NTSC and PAL in a compact package (vs AD723ARU)
- Low-voltage operation simplifies analog system rails (vs AD723ARU)
Notes de conception
Use the 28-lead TSSOP land pattern in the AD723 package drawing and place bypass capacitors close to the device supply pins. Keep analog RGB input routing short, route the video outputs away from switching nodes, and provide a low-impedance ground path beneath the analog section. Because composite-video timing and color-distortion performance depend on parasitic resistance and inductance, copying the manufacturer's application circuit is preferable to substituting generic resistor values.
Separate the RGB source path from the luminance and chrominance output path when routing the board. Place the external color-adjustment and output-network components near their associated pins so that trace resistance does not alter signal amplitudes. Keep the termination-switch connections short and confirm the intended input-impedance state in software or control logic before enabling the source.
Do not treat an encoder with the same TSSOP pin count as a substitute without comparing every pin function and signal polarity. The AD723 family also uses ordering suffixes that can distinguish temperature grade, lead finish, and reel format. Verify the AD723ARUZ ordering code, NTSC or PAL mode, RGB input amplitudes, sync connections, termination state, and YTRAP configuration against the manufacturer documentation before releasing a PCB or placing a production order.
Composite-video amplitude and color performance can be affected by long traces, incorrect source termination, and mismatched output loading. Use the manufacturer's output network values, observe the documented load-detect behavior, and test the finished cable and display combination rather than evaluating only the encoder output at the IC pin. When cross-color artifacts remain, evaluate the YTRAP setting against the actual source characteristics rather than changing several analog networks simultaneously.
Informations de conformité
The product is an analog video encoder rather than an automotive-qualified device, so AEC-Q100 does not apply. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation against the current manufacturer product documentation or declaration.