AD9822JR - 14-Bit 15 MSPS CCD Signal Processor | Analog Devices
Référence : AD9822JR ⚠ Dernier achatAD9822JR Présentation
A CCD signal processor is an interface IC that sits between an imaging sensor and the downstream digital electronics. It converts sensor outputs into clean, sampled voltage signals suitable for digitization. The AD9822 belongs to the broader signal-chain hierarchy of CCD output amplifier, analog signal processor, ADC, interface IC, and semiconductor. Its integration reduces the number of separate conditioning components required in a compact imaging system.
The AD9822 combines a 14-bit ADC rated for 15 MSPS with guaranteed three-channel operation at that rate. When only one channel is used, the supported rate increases to 12.5 MSPS. Its correlated double sampling function removes pedestal or reset-related offsets, while a programmable gain range of 1× to 6× accommodates variations in CCD output amplitude. A programmable offset of 350 mV supports alignment of multiple sensor channels.
Input clamp circuitry protects the signal chain from excessive input excursions, and the internal voltage reference reduces the external component count. The no-missing-codes guarantee is important when each output code must correspond to a valid conversion result. These functions make the processor suitable for compact scanners, imaging modules, color CCD cameras, and industrial optical systems where channel consistency, resolution, and board area matter.
A typical three-channel arrangement conditions the red, green, and blue outputs of a trilinear CCD array before conversion. A single-channel arrangement can be optimized for monochrome sensors or sequential readout architectures. The 15 MSPS conversion capability supports the stated three-channel operating mode, while the 12.5 MSPS single-channel figure provides an appropriate rate when the unused channels are disabled.
Design the SSOP layout with the input, timing, reference, and power connections positioned exactly as shown in the manufacturer pin-description material. Keep sensor traces short, provide a clean supply and ground implementation, and account for the ADC sampling system when placing bypass and decoupling capacitors. Confirm acquisition timing, channel mapping, and output coding against the specific CCD clocking scheme rather than assuming compatibility with another signal processor.
This product data combines the manufacturer's lifecycle information with application guidance, exact-part sourcing information, and practical design considerations. It also distinguishes documented AD9822 family orderable variants from unrelated CCD processors, helping engineers identify the correct package and ordering suffix for a production design.
Alternatives de remplacement direct pour AD9822JR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AD9822JR (même facteur de forme et même empreinte) — différant par Input Clamp, Package.
AD9822JRSZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD9822JRZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD9822JRZRL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD9822JRS
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →AD9822JRRL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
AD9822JR Valeurs maximales et caractéristiques électriques
| ADC Resolution | 14 bit |
| Maximum Three-Channel Conversion Rate | 15 MSPS |
| Maximum Single-Channel Conversion Rate | 12.5 MSPS |
| Number of Channels | 3 channels |
| Programmable Gain Range | 1× to 6× |
| Programmable Offset | 350 mV |
| Sampling Architecture | Correlated double sampling |
| Input Clamp | Integrated input clamp circuitry |
| Voltage Reference | Internal voltage reference |
| Missing Codes | No missing codes guaranteed |
| Target Sensor Type | Trilinear color CCD arrays and CIS devices |
| Boîtier | 28-SSOP |
| Type de montage | Surface mount |
Guide de configuration des broches du AD9822JR 28-ssop
Configuration des broches du AD9822JR (boîtier 28-ssop). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour AD9822JR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AD9822JR convient pour 6 applications: Trilinear Color CCD Camera, Monochrome CCD Imaging Module, Industrial Barcode Scanner, Document and Facsimile Imaging, Machine-Vision Camera, CIS Imaging Interface.
Trilinear Color CCD Camera
The AD9822JR is suited to trilinear color CCD imaging because it supports three-channel operation to 15 MSPS while integrating the analog conditioning and conversion functions needed at the sensor output. Correlated double sampling addresses reset-related pedestal, and the 1× to 6× gain range accommodates differences in CCD channel amplitude. The 350 mV programmable offset provides additional channel alignment capability, while the internal voltage reference reduces the number of external precision components. Used behind red, green, and blue CCD outputs, it produces three conditioned 14-bit conversion channels for image capture and downstream processing.
Recommandé
Monochrome CCD Imaging Module
A monochrome CCD module can use the AD9822JR in its single-channel operating mode, documented to 12.5 MSPS. The processor still provides correlated double sampling, programmable gain from 1× to 6×, programmable offset, input clamping, and an internal reference, allowing sensor outputs to be conditioned before digitization. This arrangement is appropriate where one amplifier channel is sufficient and board area or component count must be reduced. The final frame-rate and signal-range decision should be checked against the sensor's output amplitude, clocking, and required noise performance.
Recommandé
Industrial Barcode Scanner
The AD9822JR can condition a CCD line sensor used in an industrial barcode scanner, where stable pedestal removal and adjustable channel gain help convert weak sensor outputs into reliable digital samples. Its 14-bit conversion and 12.5 MSPS single-channel rate provide a useful operating point for line-scan imaging. Correlated double sampling reduces sensor reset offsets, while the 350 mV offset adjustment supports alignment of the analog operating point. The internal voltage reference and integrated clamp reduce external circuitry, helping keep the optical and analog sections compact.
Recommandé
Document and Facsimile Imaging
Document scanners and facsimile machines can use the AD9822JR to process analog outputs from CCD imaging arrays without separating the sampling function from basic gain and offset conditioning. The 14-bit ADC supports detailed grayscale digitization, and correlated double sampling helps suppress pedestal errors introduced by the sensor. The 1× to 6× gain range accommodates different sensor sensitivities, while the single-channel rate of 12.5 MSPS applies when only one output is read. Integrated reference and clamp functions also help reduce the number of discrete components around the imager.
Recommandé
Machine-Vision Camera
The AD9822JR is appropriate for compact machine-vision cameras that use CCD rather than CMOS sensors and require deterministic multichannel sampling. Three-channel operation to 15 MSPS supports simultaneous or interleaved color acquisition, while correlated double sampling helps maintain consistent signal levels between optical exposures. Programmable gain and offset allow calibration against different sensor and illumination conditions, and the internal reference supports repeatable conversion behavior. The 28-SSOP format preserves a relatively compact analog front end compared with separately implementing pedestal subtraction, gain, offset, and ADC functions.
Recommandé
CIS Imaging Interface
Although the AD9822JR is frequently associated with trilinear color CCD arrays, its complete CCD/CIS signal-processor architecture also makes it applicable to compatible CMOS image-sensor interfaces. The device combines a 14-bit ADC, programmable gain, programmable offset, correlated double sampling, input clamping, and an internal reference in one signal-conditioning path. This integration can reduce board area in compact optical modules. CIS adoption must be confirmed against the sensor's required sampling mode, input voltage range, timing signals, and whether correlated double sampling is supported by the particular sensor output architecture.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AD9822JR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AD9822JRSZ | AD9822JRZ | AD9822JRZRL | AD9822JRS | AD9822JRRL |
|---|---|---|---|---|---|---|
| Package | 28-SSOP | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| ADC Resolution | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
| Three-Channel Conversion Rate | 15 MSPS | 15 MSPS | 15 MSPS | 15 MSPS | 15 MSPS | 15 MSPS |
| Single-Channel Conversion Rate | 12.5 MSPS | 12.5 MSPS | 12.5 MSPS | 12.5 MSPS | 12.5 MSPS | 12.5 MSPS |
| Programmable Gain | 1× to 6× | 1× to 6× | 1× to 6× | 1× to 6× | 1× to 6× | 1× to 6× |
| Programmable Offset | 350 mV | 350 mV | 350 mV | 350 mV | 350 mV | 350 mV |
| Sampling Function | Correlated double sampling | Correlated double sampling | Correlated double sampling | Correlated double sampling | Correlated double sampling | Correlated double sampling |
| Internal Reference | Yes | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated three-channel CCD/CIS conditioning and conversion (vs AD9826KRS)
- Guaranteed three-channel throughput (vs AD9822JRSZ)
- Single-channel operating rate (vs AD9822JRZ)
Notes de conception
Use the official AD9822 pin-description table and package drawing to assign every connection in the 28-SSOP footprint. In particular, do not infer analog inputs, timing inputs, digital outputs, power pins, or reference connections from a generic interface IC. Keep the sensor signal traces short and place the input and bypass components close to their associated pins. Confirm pin 1 orientation against the package drawing before placing the device.
CCD outputs can contain pedestal, clock feedthrough, and channel-dependent amplitude differences. Exercise correlated double sampling and use the programmable gain and 350 mV offset controls to establish the operating point without relying on excessive analog gain. Validate the sampling instants and acquisition timing with an oscilloscope because incorrect clock relationships can compromise the 14-bit conversion even when the nominal 15 MSPS conversion rate is used.
Do not treat the three-channel 15 MSPS specification as interchangeable with the single-channel 12.5 MSPS specification. Verify the number of active channels, output coding, clock polarity, and sensor timing before programming the acquisition system. Also confirm the exact ordering suffix, temperature grade, qualification status, and lifecycle condition of the assembly; the product family is last time buy, so an apparently similar suffix should not be substituted without a complete comparison.
Informations de conformité
The exact-part product and distributor information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for AD9822JR. Analog Devices identifies the AD9822 family as last time buy.