Analog Devices

AD9953YSV - 400 MSPS 14-Bit DDS | Analog Devices | Signal Generation

Référence : AD9953YSV ✓ Actif
1.8 V Vdss 48-lead TQFP with exposed pad, 7 x 7 mm Package
MOQ : 1 |

AD9953YSV Présentation

Analog Devices AD9953YSV is a 1.8 V CMOS direct digital synthesizer, or DDS, featuring a 14-bit internal DAC that operates up to 400 MSPS. The device combines digital phase accumulation, a 32-bit tuning word, and high-speed DAC output in a 48-lead TQFP package with an exposed pad. These headline characteristics position it for precision signal generation, waveform synthesis, communications test equipment, and digitally controlled frequency conversion.

A direct digital synthesizer is a programmable waveform generator in the broader signal-generation and clock-and-timing hierarchy. Unlike a traditional analog oscillator whose frequency and phase are adjusted mainly by analog components, a DDS derives its output from a digital phase accumulator. AD9953YSV integrates that digital engine with a high-speed DAC, allowing frequency, phase, and amplitude-related functions to be managed through a serial control interface.

The principal features are a 400 MSPS maximum DAC update rate, a 14-bit DAC resolution, and a 32-bit tuning word. The 32-bit tuning word provides fine frequency-addressing granularity, while the 14-bit DAC establishes the output word length. The 1.8 V CMOS supply arrangement supports integration into modern low-voltage digital systems. Its 48-TQFP-EP construction, measuring 7 x 7 mm, offers a compact surface-mount implementation with an exposed thermal pad.

In operation, the AD9953 generates a sampled waveform and converts the digital sequence through its internal DAC. The externally controlled phase accumulator determines the frequency setting, while the serial interface programs device parameters. This architecture separates digital frequency control from the analog output path, making it useful when repeatable frequency changes, rapid retuning, or compact instrument control are important.

Typical applications include communications test and measurement, local oscillator generation, waveform synthesis, signal analyzers, and embedded RF test systems. In these systems, the AD9953 can generate a digitally specified output while the surrounding controller manages calibration, modulation, and test sequencing. The 400 MSPS operating rate also makes the device relevant to high-speed waveform generation and clocking architectures.

Board design must treat the analog output path, digital interface, supply distribution, and exposed pad as an integrated high-speed system. Short output routing, a stable reference implementation, adequate ground-plane continuity, and careful decoupling help preserve DAC performance. The exposed pad should be connected according to the manufacturer’s package guidance and thermal/layout recommendations.

This product page organizes the AD9953YSV’s confirmed operating characteristics, sourcing information, package details, design considerations, and application guidance. It also distinguishes the exact AD9953YSV order code from related package and reel-order variants so engineers can assess footprint compatibility without assuming that every similarly named suffix is interchangeable without verification.

Alternatives de remplacement direct pour AD9953YSV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

AD9953YSVZ

✅ Remplacement direct
📦 48-TQFP-EP (7x7)
Identical 400 MSPS, 14-bit DAC, and 32-bit tuning-word ratings; order suffix differs by packaging designation

📋 Alternative de référence (hors catalogue)

AD9953YSV Spécifications

Device Type Direct Digital Synthesis IC
Maximum DAC Update Rate 400 MSPS
Internal DAC Resolution 14 bit
Tuning Word Resolution 32 bit
Logic Supply Voltage 1.8 V
Process Technology CMOS
Boîtier 48-lead TQFP with exposed pad, 7 x 7 mm
Type de montage Surface mount
Nombre de broches 48 pins
Output Resolution 14 bit
Exposed Thermal Pad Yes
Lifecycle Recommendation Recommended for new designs

Guide de configuration des broches du AD9953YSV 48-lead tqfp with exposed pad, 7 x 7 mm

Configuration des broches du AD9953YSV (boîtier 48-lead tqfp with exposed pad, 7 x 7 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 48-lead tqfp with exposed pad, 7 x 7 mm pour le AD9953YSV

Aucune donnée de brochage détaillée disponible pour AD9953YSV.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AD9953YSV convient pour 6 applications: Communications Test Equipment, Precision Local Oscillator, High-Speed Waveform Synthesis, RF Signal Test Bench, Clock and Timing Signal Generation, Industrial Signal Generator.

🌐

Communications Test Equipment

AD9953YSV fits communications test equipment because its DDS architecture provides digitally programmable frequency generation with a 32-bit tuning word and a 400 MSPS maximum DAC update rate. The integrated 14-bit DAC supports a direct digital-to-analog waveform path, while the 48-TQFP-EP package keeps the device suitable for compact instrument electronics. A controller can load new frequency settings for channel sweeps, calibration routines, or automated measurement sequences. The system designer must still define the required output bandwidth, filtering, attenuation, and reference-clock arrangement.

📡

Precision Local Oscillator

The AD9953YSV can serve as the programmable core of a precision local-oscillator subsystem because a 32-bit tuning word gives the synthesizer fine digital frequency-addressing capability. Its 400 MSPS maximum operating rate supports high-speed conversion of the internally generated sequence into an analog output. Designers can pair the DDS with appropriate filtering, gain control, and reference distribution. The 1.8 V CMOS implementation supports integration with contemporary digital control hardware, while the exposed-pad package requires deliberate thermal and layout planning.

🖥️

High-Speed Waveform Synthesis

AD9953YSV is appropriate for waveform synthesis systems that need a 14-bit DAC operated at rates up to 400 MSPS. The digital synthesis engine permits output characteristics to be controlled programmatically instead of relying only on analog frequency-setting components. This is useful in laboratory instruments, automated test fixtures, and embedded waveform generators where repeatable control is important. Output quality will also depend on the reconstruction or filtering network, board return paths, reference stability, and the selected amplitude-control strategy.

🔧

RF Signal Test Bench

The AD9953YSV can support RF signal-test benches that require rapid, digitally commanded tone generation. A 32-bit tuning word provides detailed frequency addressing, and the 400 MSPS maximum DAC rate allows the internal 14-bit converter to operate at high update rates. This combination is useful when a test controller must switch among many frequencies while retaining one compact synthesis section. RF-specific requirements such as output level, spur performance, filtering, and connector isolation must be addressed by the surrounding analog circuitry.

⏱️

Clock and Timing Signal Generation

AD9953YSV fits clock-generation and timing subsystems that benefit from digital phase addressing and a high-speed internal DAC. The 32-bit tuning word allows a controller to represent frequency settings numerically, while the 400 MSPS maximum rate supports rapid sample-clock conversion. Designers can use the device as the programmable output element in clock cards, timing-reference modules, and synchronization test equipment. Its 1.8 V CMOS interface family and compact 48-TQFP-EP package make board-level integration possible, subject to careful return-path and exposed-pad design.

🏭

Industrial Signal Generator

AD9953YSV can be used in industrial test and measurement equipment that requires repeatable, software-controlled signal generation. Its DDS topology simplifies frequency changes compared with manually adjusted analog oscillators, while the internal 14-bit DAC and 400 MSPS maximum rate support compact high-speed output sections. An industrial instrument can use the device for sensor excitation, production-test tones, or embedded signal references. Component selection should include thermal-margin review, stable reference design, output protection, and calibration of the complete signal path.

Récapitulatif des produits recommandés

AD9953YSV Analog Devices Utilisé dans : Communications Test Equipment, Precision Local Oscillator, High-Speed Waveform Synthesis, RF Signal Test Bench, Clock and Timing Signal Generation, Industrial Signal Generator AD9953YSVZ Same-family package order code Utilisé dans : Communications Test Equipment, Precision Local Oscillator, High-Speed Waveform Synthesis, RF Signal Test Bench, Clock and Timing Signal Generation, Industrial Signal Generator
What is the AD9953YSV?
The AD9953YSV is a 1.8 V CMOS direct digital synthesizer with an internal 14-bit DAC, a 400 MSPS maximum operating rate, and a 32-bit tuning word. Analog Devices identifies the AD9953 family as recommended for new designs. The device combines a digital synthesis engine with a high-speed DAC for programmable waveform and frequency generation.
What are the key specifications of AD9953YSV?
The principal AD9953YSV specifications are a 400 MSPS maximum DAC rate, 14-bit DAC resolution, a 32-bit tuning word, and a 1.8 V CMOS supply. It is offered in a 48-lead TQFP with exposed pad measuring 7 x 7 mm. These are the confirmed headline characteristics listed for the AD9953 family and the AD9953YSV order code.
Where can I download the AD9953YSV datasheet PDF?
The AD9953YSV datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9953.pdf. The manufacturer data sheet is the controlling document for the complete pin-description table, electrical characteristics, recommended operating conditions, interface timing, and exposed-pad land pattern. Use the package drawing and pin table from that document when laying out the PCB.
Where can I find the AD9953YSV pinout?
The AD9953YSV pinout is defined in the Analog Devices AD9953 data sheet and its package-drawing section. The device uses a 48-lead TQFP with an exposed pad in a 7 x 7 mm package. Use the manufacturer’s pin-description table to map every lead, including supply, ground, serial-interface, clock, and analog-output functions, before assigning PCB nets.
What resolution and update rate does the AD9953YSV use?
The AD9953YSV combines a 14-bit DAC with a maximum update rate of 400 MSPS. Its frequency-setting mechanism uses a 32-bit tuning word. The 32-bit phase-control resolution, 14-bit output conversion, and 400 MSPS maximum rate are the key numeric distinctions to retain when evaluating this DDS against another frequency generator.
Is AD9953YSV suitable for communications test equipment?
Yes, AD9953YSV is suitable for digitally controlled signal-generation roles in communications test equipment. Its programmable DDS architecture, 32-bit tuning word, internal 14-bit DAC, and 400 MSPS maximum rate support repeatable frequency generation under digital control. The surrounding instrumentation determines whether additional filtering, calibration, modulation, or output-level conditioning is required.
What can replace AD9953YSV?
AD9953YSVZ is the closest confirmed same-package order-code alternative because it retains the 400 MSPS, 14-bit DDS, and 48-TQFP-EP characteristics while changing the order suffix. No independently validated cross-brand, pin-to-pin DDS replacement is established by the available cross-reference material. Verify the ordering code, package orientation, exposed-pad layout, and interface behavior before substituting it.
Is AD9953YSV the same as AD9953YSVZ?
AD9953YSV and AD9953YSVZ identify order codes for the same AD9953 function and 48-lead TQFP-EP package, but the suffix distinguishes ordering or packaging details. The AD9953YSVZ listing explicitly reports a 400 MSPS, 14-bit, 32-bit-tuning-word DDS in the same package. Confirm the manufacturer ordering guide and reel-versus-tray requirement before treating the suffixes as interchangeable.
When should I choose AD9953YSV over another DDS?
Choose AD9953YSV when a design requires a 400 MSPS maximum update rate, a 14-bit internal DAC, 32-bit tuning-word control, and a compact 48-TQFP-EP footprint. If a candidate offers fewer tuning-word bits, a lower maximum update rate, a different DAC resolution, or an incompatible package, it may require different filtering or PCB changes. Compare those parameters before selecting a replacement.
AD9953YSV vs AD9953YSVZ: which order code should I use?
AD9953YSV and AD9953YSVZ share the confirmed core specifications of 400 MSPS operation, a 14-bit DAC, a 32-bit tuning word, and a 48-TQFP-EP package. The practical distinction is the exact order suffix, which can encode packaging or ordering conditions. Select the suffix that matches the required delivery format and verify its packaging table entry in the Analog Devices ordering guide.
Is there a cross-brand drop-in equivalent for AD9953YSV?
No cross-brand drop-in equivalent for AD9953YSV is confirmed by the available replacement material. A same-family AD9953YSVZ order code is available, but no competitor part has been validated as sharing the exact 48-pin TQFP-EP footprint, 400 MSPS rate, 14-bit DAC, 32-bit tuning word, and required interface behavior. Use the Request a Quote form when a qualified second-source review is needed.
Where can I buy AD9953YSV and check its lead time?
Use the Request a Quote form on this page to request AD9953YSV availability, current lead time, and order handling through XAIPART. The available manufacturer and distributor listings identify the device as a 48-TQFP-EP, 400 MSPS, 14-bit DDS. Current stock and lead time should be confirmed through the quote process because availability can change.
What is the price of AD9953YSV?
Use the Request a Quote form on this page for the current AD9953YSV unit and volume pricing. The manufacturer product page identifies a 1-piece-quantity list-price reference beginning at 30.20 USD for the AD9953 family, but the exact suffix and commercial terms should be confirmed during quotation. Current price and lead time are not guaranteed by a static product-page response.
Is AD9953YSV in stock?
Current AD9953YSV stock should be confirmed through the Request a Quote form on this page. Distributor listings identify the component as orderable and describe it as a 400 MSPS, 14-bit direct digital synthesizer in a 48-TQFP-EP package. Because inventory changes by order code and region, treat the quote confirmation as the authoritative availability response.
What design considerations apply to the AD9953YSV high-speed output?
The AD9953YSV requires careful high-speed layout because it combines a 400 MSPS DAC with digital control circuitry. Place decoupling close to the supply pins, preserve uninterrupted ground references, route the analog output with short traces, and connect the exposed pad according to the manufacturer’s land-pattern and thermal guidance. Output filtering and level conditioning depend on the required waveform and load.

Données de référence d'ingénierie pour AD9953YSV — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose AD9953YSV when the design requires the confirmed AD9953 combination of a 400 MSPS maximum DAC rate, 14-bit DAC resolution, 32-bit tuning-word control, 1.8 V CMOS operation, and a 48-TQFP-EP package. AD9953YSVZ is the practical same-family alternative when its ordering suffix satisfies the required packaging format; the confirmed electrical and package characteristics remain equivalent. No cross-brand part is presented as a drop-in replacement because equivalent pin assignment, interface behavior, package geometry, and timing have not been validated. For designs needing a different update rate, DAC resolution, tuning-word width, package, or interface, evaluate a different DDS family rather than assuming that a similar description guarantees compatibility.

Comparaison avec les alternatives

Paramètre Ce produit AD9953YSVZ
Package 48-TQFP-EP (7x7) 48-TQFP-EP (7x7)
Brand Analog Devices Analog Devices
Maximum DAC Update Rate 400 MSPS 400 MSPS
Internal DAC Resolution 14 bit 14 bit
Tuning Word Resolution 32 bit 32 bit
Logic Supply Voltage 1.8 V 1.8 V
Pin Count 48 pins 48 pins
Exposed Pad Yes Yes
Lifecycle Recommendation Recommended for new designs Recommended for new designs

Principaux différenciateurs

  • Matches the confirmed performance of the same-family AD9953YSVZ order code (vs AD9953YSVZ)
  • Combines digital synthesis and a high-speed DAC in one device (vs AD9953YSVZ)
  • Fine digital frequency addressing through a 32-bit tuning word (vs AD9953YSVZ)

Notes de conception

Treat the analog output, reference path, digital control interface, and supply return as a high-speed mixed-signal layout. Place decoupling capacitance at the appropriate supply pins, maintain a continuous ground reference, and keep the analog-output route short and away from switching nodes. Verify the exposed-pad connection and thermal-via arrangement against the manufacturer’s land-pattern guidance before fabrication.

Do not select a similarly named AD9953 order code solely from its function description. AD9953YSV and AD9953YSVZ share the confirmed core ratings and package, but the suffix can distinguish ordering or packaging conditions. Check the ordering table for the required shipping format, and compare the complete 48-pin description and exposed-pad dimensions before approving a substitution.

Estimate the local dissipation from the selected operating mode and the actual supply and output conditions, then verify thermal margin using the package’s exposed-pad construction. A compact 7 x 7 mm TQFP-EP depends on its PCB thermal pad and copper paths for heat removal. Use low-impedance supply and ground connections and avoid placing the DDS next to heat sources or isolated analog sections.

The 400 MSPS maximum DAC rate makes output routing and return-path continuity important. Use a controlled impedance strategy when the analog output must traverse a meaningful PCB distance, minimize discontinuities, and locate any reconstruction or filtering components close to the device. Evaluate amplitude, attenuation, and filtering as one signal chain because each stage affects the useful output range and distortion performance.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit environmental or automotive qualification statements were confirmed for the exact AD9953YSV order code. Analog Devices identifies the AD9953 family as recommended for new designs.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AD9953YSV datasheet AD9953YSV pinout AD9953YSV datasheet pdf AD9953YSV specifications AD9953YSV equivalent AD9953YSV replacement AD9953YSV cross reference AD9953YSV vs AD9953YSVZ AD9953YSV price AD9953YSV stock Analog Devices AD9953YSV AD9953 48 TQFP EP DDS AD9953 400 MSPS waveform generator AD9953 14 bit DAC pinout

Composants & termes associés

Analog Devices AD9953YSV AD9953YSVZ AD9953 Direct Digital Synthesizer DDS Direct Digital Synthesis 14-bit DAC 32-bit tuning word 400 MSPS 1.8 V CMOS Phase accumulator Signal generator Waveform synthesis Communications test equipment Local oscillator RF signal generation Clock generation 48-TQFP-EP TQFP package family Surface-mount package Exposed thermal pad RoHS REACH AEC-Q100
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ