ADA4805-1AKSZ - 105MHz Low Power Rail-to-Rail Op Amp | ADI
Référence : ADA4805-1AKSZ ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.67 | $2,67 |
| 10 | $2.4 | $24,00 |
| 100 | $2.1 | $210,00 |
| 500 | $1.85 | $925,00 |
| 1 000 | $1.65 | $1 650,00 |
ADA4805-1AKSZ Présentation
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used to condition analog signals in applications such as filtering, amplification, and buffering. The ADA4805-1 belongs to the class of rail-to-rail output amplifiers, which can swing its output very close to the supply rails, maximizing dynamic range in low-voltage systems. As a voltage feedback amplifier, it offers stable operation with resistive feedback networks and is widely used in signal conditioning chains, from sensors to ADCs.
Key features of the ADA4805-1 include a low input offset voltage of 0.2 µV/°C drift, a high slew rate of 170 V/µs, and a low input voltage noise of 7 nV/√Hz. The rail-to-rail output stage ensures maximum output swing, while the low quiescent current extends battery life in portable instruments. The amplifier also features a wide supply range, making it suitable for both 3 V and 5 V systems, and it is fully specified over the industrial temperature range of -40°C to +125°C.
Technically, the ADA4805-1 uses a complementary bipolar process that achieves a good balance between speed and power consumption. The 105 MHz bandwidth and 170 V/µs slew rate enable it to handle fast signals, while the 500 µA quiescent current is exceptionally low for this performance class. The device also includes internal ESD protection and is available in lead-free, RoHS-compliant packages.
Typical applications include portable instrumentation, battery-powered medical devices, active filters, and ADC driver circuits. In these applications, the ADA4805-1 provides the necessary bandwidth and precision while minimizing power drain. For example, in a 16-bit SAR ADC driver, the low noise and high slew rate ensure accurate settling, while the rail-to-rail output maximizes the ADC's input range.
When designing with the ADA4805-1, ensure proper power supply decoupling with 0.1 µF capacitors close to the supply pins. The SC70 package has a thermal resistance of approximately 200°C/W, so consider power dissipation in high-temperature environments. For best performance, use a solid ground plane and keep feedback paths short to minimize parasitic capacitance.
Alternatives de remplacement direct pour ADA4805-1AKSZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ADA4805-1AKSZ (même facteur de forme et même empreinte) — différant par Slew Rate, Amplifier Type, Gain Bandwidth Product, Current - Input Bias, Current - Output / Channel.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ADA4805-1AKSZ-R2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADA4805-1AKSZ-R7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADA4807-1AKSZ-R2
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
AD8615AKSZ-R2
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ADA4805-1AKSZ Valeurs maximales et caractéristiques électriques
| Amplifier Type | General Purpose |
| Number of Circuits | 1 |
| Type de sortie | Rail-to-Rail |
| Slew Rate | 170 V/µs |
| Gain Bandwidth Product | 105 MHz |
| Current - Input Bias | 0.6 µA |
| Voltage - Input Offset | 0.2 µV/°C drift |
| Current - Supply | 500 µA |
| Current - Output / Channel | 30 mA |
| Voltage - Supply Span (Min) | 3 V |
| Voltage - Supply Span (Max) | 10 V |
| Température de fonctionnement | -40°C to +125°C |
| Boîtier / Format | SC-70-6 |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de ADA4805-1AKSZ
| Broche 1 | OUT — Output |
| Broche 2 | V- — Negative supply |
| Broche 3 | +IN — Non-inverting input |
| Broche 4 | -IN — Inverting input |
| Broche 5 | V+ — Positive supply |
| Broche 6 | NC — No connect |
Applications typiques
ADA4805-1AKSZ convient pour 6 applications: Portable Instrumentation, Battery-Powered Medical Devices, Active Filters, ADC Driver Circuits, Video Signal Processing, Industrial Control Systems.
Portable Instrumentation
The ADA4805-1AKSZ's low quiescent current of 500 µA and wide supply range make it ideal for battery-powered instruments. Its 105 MHz bandwidth ensures accurate signal conditioning for sensors and transducers, while the rail-to-rail output maximizes dynamic range in 3 V systems. The small SC70 package saves board space in handheld devices.
Recommandé
Battery-Powered Medical Devices
In medical devices like glucose monitors and pulse oximeters, power efficiency is critical. The ADA4805-1AKSZ consumes only 500 µA, extending battery life. Its low offset drift (0.2 µV/°C) ensures accurate signal processing over temperature variations. The rail-to-rail output allows full-scale signals to be digitized by ADCs without additional gain stages.
Recommandé
Active Filters
The ADA4805-1AKSZ's 105 MHz bandwidth and 170 V/µs slew rate make it suitable for active filters in communication and audio systems. Its low quiescent current is advantageous in multi-channel filter banks. The rail-to-rail output allows filters to operate at lower supply voltages without clipping, preserving signal integrity.
Recommandé
ADC Driver Circuits
The ADA4805-1AKSZ is ideal for driving high-resolution ADCs due to its low noise and high slew rate. It can settle quickly to 16-bit accuracy, ensuring accurate conversion. The rail-to-rail output maximizes the ADC's input range, and the low quiescent current reduces thermal drift in precision systems.
Recommandé
Video Signal Processing
With 105 MHz bandwidth and 170 V/µs slew rate, the ADA4805-1AKSZ can handle composite video signals. Its low power consumption is beneficial in portable video equipment. The rail-to-rail output ensures full video swing, and the small SC70 package is ideal for compact camera modules.
Recommandé
Industrial Control Systems
The ADA4805-1AKSZ operates over -40°C to +125°C, making it suitable for industrial environments. Its wide supply range (3 V to 10 V) allows use in 24 V systems with proper regulation. The low offset drift ensures accurate process control, and the rail-to-rail output interfaces directly with ADCs in PLCs and sensors.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADA4805-1AKSZ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADA4805-1ARJZ-R7 | ADA4805-1AKSZ-R2 | ADA4807-1AKSZ-R2 | AD8615AKSZ-R2 |
|---|---|---|---|---|---|
| Package | SC-70-6 | SOT-23-6 | SC-70-6 | SC-70-6 | SC-70-6 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Gain Bandwidth Product | 105 MHz | 105 MHz | 105 MHz | 130 MHz | 24 MHz |
| Quiescent Current | 500 µA | 500 µA | 500 µA | 1 mA | 1.7 mA |
| Slew Rate | 170 V/µs | 170 V/µs | 170 V/µs | 220 V/µs | 12 V/µs |
| Input Offset Drift | 0.2 µV/°C | 0.2 µV/°C | 0.2 µV/°C | 0.2 µV/°C | 0.5 µV/°C |
| Supply Voltage Range | 3 V to 10 V | 3 V to 10 V | 3 V to 10 V | 3 V to 10 V | 2.7 V to 5 V |
| Output Type | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail |
Principaux différenciateurs
- Lowest quiescent current in its class (vs ADA4807-1AKSZ-R2)
- Higher bandwidth than AD8615 (vs AD8615AKSZ-R2)
- Lower offset drift than AD8615 (vs AD8615AKSZ-R2)
Notes de conception
The ADA4805-1AKSZ operates from 3 V to 10 V supplies. Use 0.1 µF ceramic capacitors close to the V+ and V- pins for decoupling. For single-supply operation, ensure the input common-mode range is not exceeded; the device is not rail-to-rail input, so keep inputs within the specified range.
The SC70-6 package has a thermal resistance of approximately 200°C/W. For high-power applications, ensure adequate copper area on the PCB to dissipate heat. Keep traces short to minimize parasitic capacitance, which can affect high-frequency performance.
Do not exceed the absolute maximum supply voltage of 12 V. The output can swing close to the rails but not exactly to them; leave headroom for load conditions. Also, avoid driving capacitive loads greater than 100 pF without a series resistor, as this can cause instability.
Informations de conformité
RoHS compliant per Analog Devices product page. No AEC-Q100 qualification indicated.
