ADF4002SRUZ-EP - RF PLL Frequency Synthesizer | Analog Devices
Référence : ADF4002SRUZ-EP ✓ ActifADF4002SRUZ-EP Présentation
A frequency synthesizer is a timing IC that locks an output oscillator to an external reference. The ADF4002 family implements local oscillators in the upconversion and downconversion sections of wireless receivers and transmitters. Its architecture includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and a programmable N divider. The 14-bit reference counter permits selectable reference-input division ratios, while the N counter supports programmable integer multiplication.
The ADF4002SRUZ-EP is identified specifically as an enhanced-product ordering code rather than the ordinary ADF4002 designation. Analog Devices states that ADF4002-EP supports defense and aerospace applications using an AQEC standard. The product family also uses controlled manufacturing with one assembly and test site and one fabrication site, providing a defined manufacturing baseline for long-life programs.
The principal benefit of the device is integration: a phase-frequency detector, charge pump, counters, and programmable feedback path are combined in one compact 16-pin TSSOP package. This reduces the number of external timing components required around a local-oscillator loop. The 14-bit reference counter provides finer reference-ratio control than a fixed divider, while the programmable N counter supports synthesized-output selection for RF signal-chain architectures.
Typical uses include wireless receiver and transmitter local oscillators, RF upconversion and downconversion stages, communications equipment, and defense or aerospace electronic systems. The ADF4002 family is also supported by dedicated evaluation hardware. Analog Devices offers the EVAL-ADF4002 platform for controlling the synthesizer through an SDP controller, providing a practical way to evaluate divider programming, lock behavior, and reference configuration before integrating the IC into production hardware.
Layout and loop-filter design remain central to dependable PLL operation. Keep the reference and feedback routes compact, maintain a continuous ground return, place the charge-pump and loop-filter network close to the device, and isolate sensitive reference routing from high-energy RF paths. Verify acquisition range, phase noise, lock time, and spur performance across the intended reference and output-frequency ranges rather than relying on a single nominal condition.
This page combines the exact package and enhanced-product details, application guidance, technical comparison information, and practical design notes needed to evaluate the ADF4002SRUZ-EP as a programmable RF PLL building block for demanding timing systems.
Alternatives de remplacement direct pour ADF4002SRUZ-EP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
ADF4002SRU-EP
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ADF4002SRUZ-EP Spécifications
| Product Type | RF clock and frequency synthesizer with phase detector |
| Architecture | Digital phase-frequency detector, precision charge pump, programmable reference divider, and programmable N divider |
| Reference Counter Resolution | 14 bit |
| Reference Input Divider | Programmable |
| Feedback N Divider | Programmable |
| Output Architecture | Frequency synthesizer for wireless receiver and transmitter local oscillators |
| Enhanced Product Program | ADF4002-EP defense and aerospace product family |
| Defense and Aerospace Qualification | AQEC standard |
| Plage de température de fonctionnement | −55°C to +125°C |
| Boîtier | 16-pin TSSOP, 4.40 mm width |
| Type de montage | Surface mount |
| Controlled Manufacturing | One assembly and test site; one fabrication site |
Guide de configuration des broches du ADF4002SRUZ-EP 16-pin tssop, 4.40 mm width
Configuration des broches du ADF4002SRUZ-EP (boîtier 16-pin tssop, 4.40 mm width). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour ADF4002SRUZ-EP.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ADF4002SRUZ-EP convient pour 6 applications: Wireless Receiver Local Oscillator, Wireless Transmitter Upconversion, Defense and Aerospace RF Timing, Communications Test Equipment, RF Frequency Conversion Subsystem, Industrial RF Control Module.
Wireless Receiver Local Oscillator
The ADF4002SRUZ-EP fits receiver local-oscillator generation because it combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and programmable N divider in one 16-pin TSSOP device. According to the Analog Devices product page, the family is intended to implement local oscillators in the downconversion section of wireless receivers. Its 14-bit reference counter allows selectable reference division, while the programmable N divider supports output-frequency synthesis. The device’s −55°C to +125°C range supports temperature demanding communications equipment. Design the loop filter around the intended reference, channel-plan frequencies, and phase-noise targets, and keep feedback routing short to reduce added phase noise and spur pickup.
Recommandé
Wireless Transmitter Upconversion
The ADF4002SRUZ-EP is suited to transmitter upconversion systems that require a programmable local oscillator. Its phase-frequency detector, precision charge pump, reference counter, and N counter provide the core elements required to lock a local oscillator to an external reference. The 14-bit reference counter offers selectable reference ratios, while the programmable N divider permits systematic output-frequency generation for RF signal-chain architectures. Use short, impedance-controlled reference and feedback paths and place the loop-filter components close to the charge-pump outputs. Validate lock range and unwanted-signal performance across the actual channel plan because loop bandwidth, reference quality, and PCB parasitics materially influence final performance.
Recommandé
Defense and Aerospace RF Timing
ADF4002SRUZ-EP is appropriate for defense and aerospace RF timing systems that require the enhanced-product qualification approach. Analog Devices identifies ADF4002-EP as supporting defense and aerospace applications under an AQEC standard, with an operating range of −55°C to +125°C and a controlled manufacturing baseline. The integrated phase-frequency detector, precision charge pump, and programmable dividers reduce the external component count needed for a local-oscillator design. Program qualification documentation and change-control expectations separately because ordering-suffix selection and production traceability can be decisive in long-life programs. Validate the assembled design over temperature, supply range, vibration, and environmental conditions required by the specific equipment specification.
Recommandé
Communications Test Equipment
The ADF4002SRUZ-EP can provide a programmable reference-derived oscillator for communications test equipment requiring repeatable frequency generation. Its combination of a 14-bit reference counter and programmable N divider permits flexible division ratios, while the integrated phase-frequency detector and charge pump simplify the core PLL implementation. The 16-pin TSSOP package also allows compact integration in instrument front ends and RF test modules. Use EVAL-ADF4002 during development to establish programming, acquisition, and loop behavior before adapting the circuit to the instrument’s final reference architecture. For production use, evaluate phase noise, lock time, reference spurs, and temperature drift against the measurement specification rather than relying only on nominal divider values.
Recommandé
RF Frequency Conversion Subsystem
The ADF4002SRUZ-EP fits an RF frequency-conversion subsystem that must translate a stable reference into a programmable local-oscillator signal. Its low-noise digital phase-frequency detector and precision charge pump support the closed-loop timing function, while the programmable reference and N dividers provide the ratio control required by upconversion and downconversion architectures. The integrated 16-pin TSSOP implementation reduces discrete timing-component count and leaves board area for RF and filtering functions. Care should be taken to separate the reference path from sensitive RF routing and to provide a stable ground reference beneath the device. Characterize the complete loop-filter and VCO arrangement because ADF4002SRUZ-EP controls the loop but does not eliminate the need for a low-noise reference and correctly designed external filtering.
Recommandé
Industrial RF Control Module
ADF4002SRUZ-EP can support an industrial RF control module requiring programmable frequency generation over a wide temperature range. Its 14-bit reference counter and programmable N divider allow the module to support multiple operating frequencies from a common reference, while the phase detector and charge pump provide the timing feedback path. The −55°C to +125°C specification is useful for equipment exposed to severe industrial temperature conditions. The small 16-pin TSSOP package simplifies compact controller construction, although careful grounding and controlled reference routing remain essential. Use the EVAL-ADF4002 platform to characterize acquisition and lock behavior with the selected reference source, then validate interference, supply-noise coupling, and long-term stability in the final enclosure and cable environment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADF4002SRUZ-EP — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADF4002SRU-EP |
|---|---|---|
| Package | 16-pin TSSOP, 4.40 mm width | 16-pin TSSOP |
| Brand | Analog Devices | Analog Devices |
| Product Class | RF clock and frequency synthesizer | RF clock and frequency synthesizer |
Principaux différenciateurs
- Exact enhanced-product family alignment (vs ADF4002SRU-EP)
- Integrated programmable PLL core (vs ADF4002SRU-EP)
- Purpose-built for RF local oscillators (vs ADF4002SRU-EP)
Notes de conception
Route the reference, phase-detector, charge-pump, and feedback connections as short and compact as practical. Place the loop-filter components near the charge-pump and device pins, provide an uninterrupted ground connection, and avoid running sensitive reference traces beneath or parallel to high-power RF paths. These layout choices reduce coupling, phase perturbation, and reference-spur pickup that cannot be corrected simply by changing the programmed divider ratio.
Do not treat the ADF4002SRUZ-EP as a complete RF oscillator without a suitable external VCO and correctly designed loop filter. The device provides the phase-frequency detector, charge pump, reference counter, and N divider, but loop bandwidth, acquisition behavior, phase noise, and output stability also depend on the VCO, reference source, filter component values, and PCB implementation. Verify every operating condition against the manufacturer data sheet and the intended RF channel plan.
Preserve the integrity of the reference signal before evaluating synthesizer performance. Use a controlled reference source, maintain appropriate return paths, and keep reference distribution isolated from switching and RF circuitry. During bring-up, measure reference amplitude, lock state, output phase noise, and unwanted spurs across temperature. If the loop fails to acquire, verify divider programming and reference configuration before changing component values or widening the loop bandwidth.
Use the 16-pin TSSOP footprint and copper layout recommended by Analog Devices, accounting for both electrical performance and thermal dissipation. The −55°C to +125°C operating range can make package self-heating significant at the upper temperature limit. Check the data sheet for supply dissipation and junction-temperature limits, and provide copper and airflow appropriate to the final enclosure rather than assuming laboratory cooling conditions.
Informations de conformité
Analog Devices states that ADF4002-EP supports defense and aerospace applications using an AQEC standard, but no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is shown in the supplied product-page excerpt.