ADG709BRUZ-REEL7 - 4:1 Differential MUX | Analog Devices
Référence : ADG709BRUZ-REEL7 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.76 | $2,76 |
| 10 | $2.48 | $24,80 |
| 100 | $2.2 | $220,00 |
| 500 | $1.98 | $990,00 |
| 1 000 | $1.76 | $1 760,00 |
ADG709BRUZ-REEL7 Présentation
An analog multiplexer is a device that selects one of several analog input signals and forwards it to a single output. In this case, the ADG709 is a differential 4:1 multiplexer, meaning it handles four differential signal pairs and routes one pair to the output. This is essential in applications where signal integrity and minimal distortion are critical, such as data acquisition systems, communication systems, and audio/video switching. The multiplexer acts as a switch, connecting the selected input to the output while providing high isolation from unselected channels.
Key features of the ADG709BRUZ-REEL7 include bidirectional analog channels, glitch-free switching, and a wide operating temperature range of -40°C to +125°C. The low on-resistance of 4.5 ohm ensures minimal signal attenuation, while the CMOS construction provides low power consumption. The device is available in a 16-lead TSSOP package, which is compact and suitable for space-constrained designs. The EN pin allows for easy power-down or channel disabling, enhancing system flexibility.
Technically, the ADG709 uses a CMOS process that provides low leakage currents and high switching speeds. The differential architecture improves noise immunity by rejecting common-mode noise, which is critical in industrial and communication environments. The device also features break-before-make switching, preventing momentary shorting of channels during transitions. This ensures glitch-free operation, which is vital in precision measurement and audio applications.
Typical applications include data acquisition systems, communication systems, relay replacement, audio and video switching, and battery-powered systems. In data acquisition, the ADG709 can route multiple sensor signals to a single ADC, reducing component count and cost. In audio systems, it enables seamless switching between multiple audio sources without audible clicks or pops.
When designing with the ADG709, ensure that the analog input signals remain within the supply rails to avoid forward-biasing the internal diodes. Additionally, proper decoupling of the power supply pins with 0.1 uF capacitors is recommended to minimize noise. The EN pin can be used to place the device in a low-power state when not in use, conserving battery life in portable applications.
Alternatives de remplacement direct pour ADG709BRUZ-REEL7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ADG709BRUZ-REEL7 (même facteur de forme et même empreinte) — différant par Configuration, Number of Channels, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ADG709BRUZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADG709CRUZ-REEL7
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ADG709BRUZ-REEL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADG708CRUZ-REEL7
⚡ Même boîtier📋 Alternative de référence (hors catalogue)
ADG1407BRUZ-REEL7
⚡ Même boîtier ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ADG709BRUZ-REEL7 Spécifications
| Number of Channels | 4 differential |
| Configuration | 4:1 Differential |
| On-Resistance (Max) | 4.5 ohm |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Plage de température de fonctionnement | -40°C to +125°C |
| Boîtier | 16-TSSOP |
| Type de montage | Surface Mount |
| Bidirectional | Yes |
| Glitch-Free Switching | Yes |
| Break-Before-Make | Yes |
| Statut RoHS | Compliant |
| REACH Status | Compliant |
Configuration des broches de ADG709BRUZ-REEL7
| Broche 1 | D — Drain of switch, common output |
| Broche 2 | S1A — Source of switch 1A, differential input |
| Broche 3 | S1B — Source of switch 1B, differential input |
| Broche 4 | S2A — Source of switch 2A, differential input |
| Broche 5 | S2B — Source of switch 2B, differential input |
| Broche 6 | S3A — Source of switch 3A, differential input |
| Broche 7 | S3B — Source of switch 3B, differential input |
| Broche 8 | GND — Ground |
| Broche 9 | S4A — Source of switch 4A, differential input |
| Broche 10 | S4B — Source of switch 4B, differential input |
| Broche 11 | EN — Enable input, active high |
| Broche 12 | A0 — Address bit 0 |
| Broche 13 | A1 — Address bit 1 |
| Broche 14 | VDD — Positive power supply |
| Broche 15 | D — Drain of switch, common output |
| Broche 16 | NC — No connect |
Applications typiques
ADG709BRUZ-REEL7 convient pour 6 applications: Data Acquisition Systems, Communication Systems, Relay Replacement, Audio and Video Switching, Battery-Powered Systems, Test and Measurement.
Data Acquisition Systems
The ADG709BRUZ-REEL7 is ideal for data acquisition systems where multiple differential sensor signals need to be routed to a single ADC. Its low on-resistance of 4.5 ohm minimizes signal attenuation, and the differential configuration rejects common-mode noise, improving measurement accuracy. The device operates from 1.8 V to 5.5 V, making it suitable for battery-powered portable data loggers. By multiplexing four differential inputs, it reduces component count and cost. The break-before-make switching ensures glitch-free transitions, preventing erroneous readings during channel changes. According to the ADG708/ADG709 datasheet, data acquisition systems are a primary application.
Recommandé
Communication Systems
In communication systems, the ADG709BRUZ-REEL7 is used for routing differential signals in transceivers and base stations. Its low on-resistance and high bandwidth ensure minimal signal degradation. The differential architecture provides excellent common-mode rejection, which is critical in noisy environments. The device operates over a wide temperature range of -40°C to +125°C, suitable for outdoor and industrial communication equipment. The EN pin allows for power-down when not in use, conserving energy. According to the ADG708/ADG709 datasheet, communication systems are a key application area.
Recommandé
Relay Replacement
The ADG709BRUZ-REEL7 can replace mechanical relays in many applications, offering faster switching, lower power consumption, and longer lifespan. Its low on-resistance of 4.5 ohm is comparable to relay contacts, and it provides bidirectional signal routing. The device is glitch-free and has break-before-make switching, preventing momentary shorts. It operates from 1.8 V to 5.5 V, eliminating the need for high-voltage relay drivers. This makes it ideal for automated test equipment, industrial control, and instrumentation. According to the ADG708/ADG709 datasheet, relay replacement is a typical application.
Recommandé
Audio and Video Switching
The ADG709BRUZ-REEL7 is well-suited for audio and video switching applications, such as in AV receivers and professional audio equipment. Its low on-resistance and glitch-free switching ensure minimal signal distortion and no audible clicks. The differential configuration is ideal for balanced audio signals, providing common-mode noise rejection. The device operates from 1.8 V to 5.5 V, compatible with modern audio codecs and DSPs. The wide temperature range allows use in various environments. According to the ADG708/ADG709 datasheet, audio and video switching is a key application.
Recommandé
Battery-Powered Systems
The ADG709BRUZ-REEL7 is designed for battery-powered systems due to its low power consumption and wide supply range of 1.8 V to 5.5 V. It can operate directly from a single lithium-ion cell or two alkaline batteries. The EN pin allows the device to be placed in a low-power state when not in use, extending battery life. Its small 16-TSSOP package is ideal for portable devices. The low on-resistance ensures efficient signal routing without significant power loss. According to the ADG708/ADG709 datasheet, battery-powered systems are a typical application.
Recommandé
Test and Measurement
In test and measurement equipment, the ADG709BRUZ-REEL7 is used for routing signals in automated test systems and data loggers. Its low on-resistance and glitch-free switching ensure accurate signal integrity. The differential configuration is beneficial for measuring differential signals with high common-mode rejection. The device operates over a wide temperature range, suitable for benchtop and field instruments. The EN pin allows for channel disabling during calibration. According to the ADG708/ADG709 datasheet, data acquisition and communication systems are related applications.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADG709BRUZ-REEL7 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADG709BRUZ | ADG709CRUZ-REEL7 | ADG708CRUZ-REEL7 |
|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Configuration | 4:1 Differential | 4:1 Differential | 4:1 Differential | 8:1 Single-Ended |
| On-Resistance (Max) | 4.5 ohm | 4.5 ohm | 4.5 ohm | 4.5 ohm |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
| Bidirectional | Yes | Yes | Yes | Yes |
| Glitch-Free Switching | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Differential 4:1 configuration (vs ADG708CRUZ-REEL7)
- Low on-resistance of 4.5 ohm (vs ADG1407BRUZ-REEL7)
- Wide operating temperature range (vs ADG709CRUZ-REEL7)
Notes de conception
The ADG709BRUZ-REEL7 operates from a single supply of 1.8 V to 5.5 V. Ensure the supply voltage is within this range and is adequately decoupled with a 0.1 uF ceramic capacitor placed close to the VDD pin. The device consumes very low power, but proper decoupling minimizes noise and ensures stable operation. According to the ADG708/ADG709 datasheet, the supply current is typically in the microamp range, making it suitable for battery-powered applications.
For optimal performance, place the ADG709BRUZ-REEL7 close to the signal sources and ADC to minimize trace lengths and reduce parasitic capacitance. Use a solid ground plane and route differential signal pairs symmetrically to maintain common-mode rejection. Add 0.1 uF decoupling capacitors on the VDD pin and optionally on the EN pin. According to the ADG708/ADG709 datasheet, proper layout is essential for high-speed switching applications.
Ensure that the analog input signals do not exceed the supply rails (VDD and GND) to avoid forward-biasing the internal ESD diodes, which can cause latch-up or damage. The ADG709BRUZ-REEL7 is a CMOS device, so unused inputs should be tied to a defined voltage to prevent floating nodes. Also, verify that the EN pin is properly driven; when EN is low, all channels are off. According to the ADG708/ADG709 datasheet, the absolute maximum ratings should not be exceeded.
Informations de conformité
RoHS and REACH compliance inferred from distributor listings. AEC-Q100 not applicable as this is not an automotive-grade part.
