Texas Instruments

ADS1246IPW - 24-Bit 2kSPS Precision ADC | Texas Instruments

Référence : ADS1246IPW ✓ Actif
2.7 V to 5.25 V Vdss 16-pin TSSOP (PW) Package
MOQ : 1 |

ADS1246IPW Présentation

The Texas Instruments ADS1246IPW is a 24-bit, 2kSPS, single-channel delta-sigma analog-to-digital converter with an integrated programmable gain amplifier for precision sensor measurement. It operates from a 2.7 V to 5.25 V supply and is packaged in a 16-pin TSSOP package. The device supports SPI communication and an operating temperature range of -40 °C to 105 °C.

A delta-sigma ADC is a precision data-converter category that uses oversampling, noise shaping, and digital filtering to convert an analog input into a high-resolution digital result. It belongs to the ADC hierarchy within analog and mixed-signal semiconductors. Compared with many high-speed flash and SAR converters, a delta-sigma architecture is especially useful when low noise, high resolution, and effective input filtering matter more than rapid transient acquisition.

The ADS1246 integrates several signal-chain functions. Its programmable gain amplifier conditions low-level sensor signals before conversion, while the 24-bit conversion core supports precision measurement of bridge sensors, temperature sensors, pressure transducers, and other analog sources. Its 2kSPS maximum conversion rate is suitable for continuous monitoring rather than high-bandwidth waveform capture. The SPI interface supports digital configuration and data transfer, and the internal oscillator supports operation without an external clock source.

The single-cycle settling digital filter helps suppress out-of-band noise and reduces the need for extensive analog filtering. The integrated PGA reduces the need for a separate gain stage in many sensor interfaces, which can simplify board layout and lower component count. However, the ADC’s resolution and conversion rate do not alone determine system accuracy; sensor excitation, reference stability, input noise, grounding, and PCB layout remain important contributors to final measurement performance.

Typical uses include industrial process monitoring, thermocouple and RTD systems, load-cell and strain-gauge instrumentation, pressure sensing, portable measurement equipment, and embedded data acquisition. The 16-pin TSSOP package is compact enough for mixed-signal control boards while providing dedicated digital and analog interfaces suitable for precision measurement front ends.

When laying out the circuit, place the analog input, reference, and decoupling connections close to the device and keep digital switching nodes away from sensitive sensor traces. Use a clean, stable reference network and follow the manufacturer’s recommended capacitor values. Confirm the complete pin assignment and exposed-pad requirements against the ADS1246 datasheet before releasing the PCB layout.

This page combines the official device specifications, package and temperature information, practical sensor-measurement guidance, and a qualified drop-in comparison. It also distinguishes genuine pin-compatible alternatives from related converters that require different packages or redesigned layouts.

Alternatives de remplacement direct pour ADS1246IPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

ADS1247IPW

✅ Remplacement direct
📦 16-pin TSSOP (PW)
Adds a built-in very low-drift voltage reference while retaining the 24-bit, 2kSPS family architecture; 90% key-parameter proximity

📋 Alternative de référence (hors catalogue)

ADS1248IPW

✅ Remplacement direct
📦 16-pin TSSOP (PW)
Adds a built-in very low-drift voltage reference while retaining the 24-bit, 2kSPS family architecture; 90% key-parameter proximity

📋 Alternative de référence (hors catalogue)

ADS1246IPW Valeurs maximales et caractéristiques électriques

Résolution 24 bit
Conversion Rate 2 kSPS
Input Channels 1 input
Architecture Delta-sigma ADC
Programmable Gain Amplifier Integrated
Digital Filter Single-cycle settling
Internal Oscillator Yes
Digital Interface SPI
Supply Voltage Range 2.7 V to 5.25 V
Plage de température de fonctionnement -40 °C to 105 °C
Boîtier 16-pin TSSOP (PW)
Type de montage Surface mount
Shipping Format Tube

Guide de configuration des broches du ADS1246IPW 16-pin tssop (pw)

Configuration des broches du ADS1246IPW (boîtier 16-pin tssop (pw)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 16-pin tssop (pw) pour le ADS1246IPW

Aucune donnée de brochage détaillée disponible pour ADS1246IPW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADS1246IPW convient pour 6 applications: Industrial Temperature Measurement, Pressure Transducer Interface, Load Cell and Strain Gauge Measurement, Process Control Instrumentation, Portable Environmental Monitoring, Embedded Data Acquisition.

🏭

Industrial Temperature Measurement

The ADS1246IPW is suitable for low-bandwidth industrial temperature monitoring where measurement resolution and input-noise rejection are more important than high-speed acquisition. Its 24-bit delta-sigma conversion provides ample digital resolution for common thermocouple, RTD, and resistive-sensor front ends, while the integrated programmable gain amplifier can condition small sensor signals without a separate gain stage. The 2kSPS conversion rate supports rapid but stable thermal readings, and the single-cycle settling filter helps reject noise outside the selected measurement bandwidth. In a practical implementation, the sensor connects through the appropriate input-conditioning network, while the analog and reference paths remain close to the ADC to minimize interference. The -40 °C to 105 °C operating range suits industrial equipment when environmental protection and calibration are handled correctly.

🧩

Pressure Transducer Interface

The ADS1246IPW fits bridge and strain-gauge pressure interfaces that produce relatively small differential signals and require stable digital output. Its integrated programmable gain amplifier reduces analog front-end complexity, while the 24-bit resolution preserves fine measurement detail across the selected gain range. At 2kSPS, the converter is appropriate for continuous pressure monitoring rather than shock or high-frequency transient analysis. Place the input network and reference components close to the TSSOP device, keep switching circuitry away from the sensor input, and provide stable excitation to avoid converting reference or supply drift into measurement error. The SPI interface allows the host controller to configure gain, data rate, and operating mode while receiving synchronized conversion data.

📐

Load Cell and Strain Gauge Measurement

The ADS1246IPW is appropriate for load-cell and strain-gauge instrumentation because its programmable gain amplifier and high-resolution delta-sigma core can capture low-level differential signals while limiting out-of-band noise. The 2kSPS data rate is well matched to static force measurement, load verification, and slow structural-load monitoring. The integrated single-cycle settling filter simplifies the conversion of a conditioned analog signal into stable 24-bit data, and the SPI interface supports continuous conversion or triggered acquisition. Designers should evaluate input overrange, common-mode voltage, reference accuracy, and sensor excitation separately because ADC resolution cannot compensate for unsuitable bridge excitation or an overvoltage condition. A quiet analog ground plane and short input traces are especially important around the 16-pin TSSOP footprint.

🏭

Process Control Instrumentation

The ADS1246IPW supports process-control modules that monitor slow-changing variables such as pressure, flow, level, or temperature. The 24-bit resolution provides detailed digital readings, and the 2kSPS conversion rate is sufficient for supervisory control loops that do not require kilovolt-per-second transient capture. The integrated PGA can accept conditioned sensor outputs while the digital filter reduces high-frequency process noise. Through SPI, a controller or embedded system can adjust acquisition settings and receive consistently formatted measurements. For reliable industrial operation, verify that every analog input remains within the device’s electrical limits, isolate the sensor when long cables are involved, and account for calibration drift. The -40 °C to 105 °C range supports many industrial installations when the complete enclosure also satisfies its thermal requirements.

📱

Portable Environmental Monitoring

The ADS1246IPW can serve as the measurement core in a portable environmental monitor that combines a resistive, semiconductor, or thermistor sensor with a low-power controller. Its single-channel 24-bit architecture balances conversion detail with a modest sampling rate, while the internal oscillator eliminates the need for a separate clock source. The integrated PGA can amplify conditioned sensor outputs, and the SPI interface provides a straightforward connection to a microcontroller or dedicated display controller. Battery-operated designs should still evaluate the complete power budget, including the sensor excitation and external reference or regulator. Because environmental sensors are often physically distant from the electronics, protection and filtering at the connector are essential. Keep those transient-protection components away from the sensitive ADC input so their leakage does not degrade the selected measurement gain.

🖥️

Embedded Data Acquisition

The ADS1246IPW is appropriate for embedded data-acquisition modules that measure one analog channel at high resolution and communicate results through a serial controller interface. Its 24-bit delta-sigma architecture and integrated PGA support precise conditioning, while the 2kSPS rate is suitable for continuous logging of slow or quasi-static signals. The internal oscillator and single-cycle settling filter simplify system timing, and SPI allows configuration, status reading, and transfer of each conversion result. A practical board should provide local decoupling close to the supply pins, a controlled analog reference, and short input routes. If the acquisition system includes multiplexers or switching relays, account for settling time and injected charge at the ADC input. Firmware should also verify status and data-ready behavior before reading each 24-bit result.

Récapitulatif des produits recommandés

ADS1131IDR Texas Instruments Utilisé dans : Industrial Temperature Measurement, Pressure Transducer Interface, Load Cell and Strain Gauge Measurement, Process Control Instrumentation, Portable Environmental Monitoring, Embedded Data Acquisition ADS1246IPW Texas Instruments Utilisé dans : Industrial Temperature Measurement, Portable Environmental Monitoring ADS1247IPW Same-family precision ADC with integrated voltage reference Utilisé dans : Pressure Transducer Interface, Process Control Instrumentation ADS1248IPW Same-family option with integrated voltage reference Utilisé dans : Load Cell and Strain Gauge Measurement, Embedded Data Acquisition
What are the key specifications of ADS1246IPW that engineers should know?
The ADS1246IPW is a 24-bit, 2kSPS, single-channel delta-sigma ADC with an integrated programmable gain amplifier and SPI interface. According to the Texas Instruments ADS1246 product information, it operates from 2.7 V to 5.25 V, supports a -40 °C to 105 °C operating range, and uses a 16-pin TSSOP package. Its single-cycle settling digital filter and internal oscillator are important features for compact precision-sensor front ends that require noise filtering without an external clock.
Where can I download the ADS1246IPW datasheet PDF?
The official ADS1246IPW documentation is available from the Texas Instruments product page at https://www.ti.com/product/ADS1246 and its part-details page at https://www.ti.com/product/ADS1246/part-details/ADS1246IPW. These pages provide the manufacturer datasheet, ordering information, package information, and technical parameters. The datasheet pin-description table should be used to assign every signal and to confirm the PCB footprint for the 16-pin TSSOP package.
Where can I find the ADS1246IPW pinout?
The ADS1246IPW pinout is published in the pin-configuration section of the Texas Instruments ADS1246 datasheet and on the manufacturer part-details page. The device is offered in a 16-pin TSSOP package. Use the datasheet’s pin-description table when assigning analog inputs, reference connections, supply pins, ground pins, and SPI signals because the complete numbered mapping is not reproduced in this product summary.
What is the ADS1246IPW used for?
The ADS1246IPW is used for precision analog sensor measurements that require high resolution, integrated gain, and digital filtering. The Texas Instruments product information identifies it as a 24-bit, 2kSPS, one-channel delta-sigma ADC with a programmable gain amplifier. It is appropriate for low-bandwidth industrial monitoring, temperature sensing, bridge-based measurements, pressure transducers, and other applications where the 2kSPS rate is sufficient.
Is ADS1246IPW suitable for temperature sensor measurement?
Yes, ADS1246IPW is suitable for many precision temperature-sensing systems because its 24-bit resolution and integrated PGA can condition low-level sensor outputs while the delta-sigma filter suppresses out-of-band noise. The 2kSPS conversion rate is more than adequate for common temperature monitoring. The ADC is also available in the same precision ADC family described by Texas Instruments for temperature-sensor applications.
Where to buy ADS1246IPW online?
Use the Request a Quote form on this page to request ADS1246IPW availability, order quantities, and current lead time. The exact target shown is ADS1246IPW in a 16-pin TSSOP package, so confirm the package suffix and ordering code when placing the request. Avoid substituting a different package or shipping format unless the PCB footprint and purchasing requirements have been reviewed.
What is the price of ADS1246IPW?
Current ADS1246IPW pricing, stock, and quantity availability should be requested through the Request a Quote form on this page. The form is linked to the exact ADS1246IPW ordering configuration and allows purchasing personnel to confirm current commercial terms. Confirm the 16-pin TSSOP package and tube shipping format as part of the quotation to avoid ordering a mechanically or commercially different variant.
What is the lead time for ADS1246IPW?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Texas Instruments identifies ADS1246IPW as the PW, 16-pin TSSOP ordering option, and distributor search results show it as an orderable catalog part. The form should be used for a binding lead-time response tied to the exact package suffix, quantity, and shipment destination.
Is ADS1246IPW in stock?
ADS1246IPW availability changes with inventory and order volume, so use the Request a Quote form on this page for the current stock position. The manufacturer lists the part as a 16-pin TSSOP ordering option, and distributor listings show distribution activity for the device. A confirmed stock allocation and shipment schedule should accompany the quotation before production material is reserved.
ADS1246IPW vs ADS1247IPW - which is better for sensor measurement?
ADS1247IPW is the better choice when the design needs the ADS1246 platform together with a built-in, very low-drift voltage reference. According to Texas Instruments, the ADS1246, ADS1247, and ADS1248 share a highly integrated 24-bit precision ADC architecture, but the ADS1247 and ADS1248 add the internal reference. ADS1246IPW remains appropriate when the board uses an external reference and that provides the required accuracy, drift, and flexibility.
ADS1246IPW vs ADS1248IPW - what is the difference?
The primary documented difference is the built-in, very low-drift reference in ADS1248IPW, while ADS1246IPW uses an external reference arrangement. Both devices belong to the Texas Instruments ADS1246, ADS1247, and ADS1248 precision ADC family and provide a 24-bit, highly integrated delta-sigma conversion architecture. Choose ADS1248IPW to reduce reference-component count; choose ADS1246IPW when external reference control is a system requirement.
When should I choose ADS1246IPW over ADS1247IPW?
Choose ADS1246IPW when the design intentionally uses an external voltage reference or requires the reference configuration unique to the ADS1246 member of the family. Choose ADS1247IPW when its integrated very low-drift reference simplifies the board and meets the system accuracy target. Both are 16-pin PW devices in the same precision ADC family, but the reference implementation must be reviewed before making a replacement decision.
Is ADS1246IPW suitable for industrial sensor interfaces?
Yes, ADS1246IPW fits industrial sensor interfaces that need 24-bit resolution but operate below the 2kSPS conversion limit. Its integrated PGA reduces the need for a separate analog gain stage, while the delta-sigma digital filter rejects high-frequency noise. The -40 °C to 105 °C operating range supports industrial equipment, although signal conditioning, isolation, surge protection, and calibration requirements must also be addressed.
What can replace ADS1246IPW?
ADS1247IPW and ADS1248IPW are the closest same-brand options because they retain the 16-pin PW package and the shared ADS1246-family precision ADC architecture. ADS1247IPW adds a built-in very low-drift reference, and ADS1248IPW adds that same reference capability to the family. ADS1246IPWR is a reel-shipping order variant rather than a distinct engineering upgrade, so verify package, reference, and firmware requirements before replacement.
What is the best Texas Instruments equivalent for ADS1246IPW?
The best Texas Instruments equivalent depends on the reference requirement: ADS1247IPW or ADS1248IPW can be considered within the same 16-pin precision ADC family, while ADS1246IPWR is the reel-packaging order variant of the same device. According to the manufacturer family information, ADS1247 and ADS1248 add a built-in very low-drift voltage reference. Verify pin functions, reference requirements, initialization sequence, and acquisition performance before fitting an alternative.
What is the best cross-brand drop-in replacement for ADS1246IPW?
No cross-brand drop-in replacement is established by the available cross-reference results. The identified comparisons include devices with different packages, channel counts, or functions, while ADS1230IPW is explicitly described as not pin-compatible because it has a different pin count and pin functions. For that reason, do not assume that another manufacturer’s 24-bit ADC is a direct replacement; request a manufacturer-confirmed pin mapping and review all register, reference, and timing differences.

Données de référence d'ingénierie pour ADS1246IPW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ADS1246IPW for single-channel precision measurements that benefit from 24-bit resolution, an integrated programmable gain amplifier, a delta-sigma filter, and an external-reference architecture. It is well matched to pressure, temperature, load-cell, and industrial process sensors operating below 2kSPS. Consider ADS1247IPW when the same family’s integrated very low-drift reference simplifies the design, and ADS1248IPW when that reference implementation suits the complete measurement chain. Keep ADS1246IPW when external-reference control is important. ADS1256IDBRG4 and ADS1282IPWG4 are not drop-in choices because their packages and channel or conversion architectures differ, while ADS1230IPW is explicitly not pin-compatible. For any substitution, verify physical dimensions, pin functions, reference wiring, SPI protocol, initialization sequence, conversion timing, and acquisition performance rather than relying only on resolution.

Comparaison avec les alternatives

Paramètre Ce produit ADS1247IPW ADS1248IPW
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP (PW)
Resolution 24 bit 24 bit 24 bit
Conversion Rate 2 kSPS 2 kSPS 2 kSPS
Input Channels 1 input 1 input 1 input
Architecture Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC
Programmable Gain Amplifier Integrated Integrated Integrated
Digital Interface SPI SPI SPI
Internal Oscillator Yes Yes Yes
Internal Voltage Reference No Yes, built-in very low-drift reference Yes, built-in very low-drift reference
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V
Operating Temperature Range -40 °C to 105 °C -40 °C to 105 °C -40 °C to 105 °C

Principaux différenciateurs

  • High resolution with an integrated gain stage (vs ADS1247IPW)
  • External-reference architecture preserves reference flexibility (vs ADS1248IPW)
  • Compact 16-pin TSSOP implementation (vs ADS1282IPWG4)

Notes de conception

Route the analog input, reference, and supply connections directly to the ADS1246IPW with short traces and minimal loop area. Place the manufacturer-recommended supply and reference capacitors at the associated device pins, using a quiet analog ground region for sensitive return currents. Keep SPI clock and data traces away from the input and reference nodes. Because the converter resolves small sensor signals, a long analog trace or an unintended ground connection can contribute more error than the nominal 24-bit resolution suggests.

Apply protection and filtering at the sensor connector rather than directly across the ADC input when long cables can introduce transients. Select the input filter and protection devices with leakage, capacitance, and common-mode voltage appropriate to the selected PGA gain and signal bandwidth. Verify that protection-network settling is compatible with the 2kSPS conversion rate. Excessive capacitance at the input can delay settling and reduce accuracy, while insufficient filtering can allow converter aliasing or sensor interference to reach the measurement channel.

Do not interpret the 24-bit converter resolution as guaranteed 24-bit absolute accuracy. Reference noise and drift, excitation accuracy, sensor nonlinearity, input overrange, and PCB leakage can reduce the complete measurement chain’s accuracy. Confirm the external-reference arrangement required by ADS1246IPW, observe the specified input and common-mode limits, and verify startup and conversion sequencing in firmware. If using ADS1247IPW or ADS1248IPW as replacements, review reference-pin usage and initialization changes rather than assuming identical firmware behavior.

Separate the analog measurement area from digital switching and clock sources. Use a continuous ground plane with careful partitioning of high-current return paths rather than splitting the ground plane beneath the ADC unless the complete system reference design specifically requires it. Place input and reference components on the same side of the board when possible, and avoid routing SPI signals beneath sensitive analog nodes. Validate the final layout by measuring noise and conversion stability with the intended sensor, cable, reference, and power supply.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance status was not explicitly stated in the manufacturer and distributor information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements with Texas Instruments before production release.

Recherches associées

ADS1246IPW ADS1246IPW datasheet ADS1246IPW datasheet pdf ADS1246IPW pinout ADS1246IPW specifications ADS1246IPW 24 bit ADC ADS1246IPW 2kSPS ADS1246IPW TSSOP-16 Texas Instruments ADS1246IPW ADS1246IPW equivalent ADS1246IPW replacement ADS1246IPW vs ADS1247IPW ADS1246IPW price ADS1246IPW stock ADS1246IPW application circuit

Composants & termes associés

Texas Instruments ADS1246IPW ADS1247IPW ADS1248IPW ADS1246 delta-sigma ADC analog-to-digital converter precision ADC programmable gain amplifier PGA single-cycle settling digital filter SPI internal oscillator external voltage reference 24-bit resolution 2kSPS conversion rate TSSOP-16 surface-mount package precision sensor measurement pressure transducer load-cell measurement temperature measurement industrial process monitoring signal-chain conditioning RoHS REACH AEC-Q100
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ