ADSP-3221JG - 32-Bit Floating-Point DSP Processor | Analog Devices
Référence : ADSP-3221JG ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $192.4578 | $192,46 |
| 10 | $192.4578 | $1 924,58 |
| 100 | $192.4578 | $19 245,78 |
| 500 | $192.4578 | $96 228,90 |
| 1 000 | $192.4578 | $192 457,80 |
ADSP-3221JG Présentation
A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for filtering, transforms, and other repetitive numerical operations. A DSP belongs to the processor and embedded-signal-processing hierarchy rather than the general-purpose MCU category. Its arithmetic units and data paths are arranged to accelerate recurring calculations with predictable timing, making it useful in industrial control, communications, audio, instrumentation, and embedded imaging systems.
The verified source data identifies ADSP-3221JG as a floating-point DSP peripheral with a 32-bit output data bus, 5 V nominal voltage, and an 8 MHz maximum clock frequency. Its 144-pin PGA package provides the terminal count required by this high-pin-count processor family. The commercial temperature grade and ceramic package distinguish this ordering code from lower-temperature or differently packaged variants.
ADSP-3221JG can serve as a dedicated arithmetic engine beside a host processor or within a multiprocessor signal-processing architecture. Floating-point operation is particularly useful when dynamic range and numerical scaling matter more than minimal integer cost. System designers should still budget processor resources around clocking, memory connectivity, peripheral buses, and deterministic software scheduling rather than treating clock frequency as the sole measure of throughput.
Typical application areas include real-time filtering, industrial signal acquisition, communications signal conditioning, audio processing, and embedded control. In these systems, the DSP's predictable numerical execution can simplify partitioning complex algorithms from supervisory control, while its 144-terminal package requires careful high-density PCB layout and a stable 5 V supply.
The most important design consideration is package-level implementation. A PGA-144 footprint demands controlled escape routing, via strategy, ground-plane continuity, and careful decoupling around the 5 V supply. Thermal and supply integrity should be verified in the assembled system because package construction and board-level copper can materially affect junction temperature and clock stability.
This product page consolidates verified distributor specifications, package and sourcing information, application guidance, and qualified drop-in alternatives. It separates confirmed facts from unknown parameters so engineers can assess replacement feasibility without relying on an unsupported cross-reference.
Alternatives de remplacement direct pour ADSP-3221JG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesADSP-3221JG Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit floating-point DSP peripheral processor |
| Processor Width | 32 bit |
| Output Data Bus Width | 32 bit |
| Arithmetic Type | Floating-point ALU |
| Fréquence d'horloge maximale | 8 MHz |
| Nominal Supply Voltage | 5 V |
| Temperature Grade | Commercial |
| Number of Terminals | 144 |
| Package Code | PGA |
| Package Shape | Square |
| Package Description | Ceramic PGA-144 |
| Type de montage | Through-hole / pin |
| Product Category | DSP peripheral |
| Statut RoHS | unknown |
| REACH Status | unknown |
Guide de configuration des broches du ADSP-3221JG ceramic pga-144
Configuration des broches du ADSP-3221JG (boîtier ceramic pga-144). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ADSP-3221JG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ADSP-3221JG convient pour 6 applications: Industrial Real-Time Signal Processing, Communications Signal Conditioning, Audio DSP Processing, Precision Instrumentation and Measurement, Embedded Control and Automation, Data Acquisition Front Ends.
Industrial Real-Time Signal Processing
ADSP-3221JG fits a dedicated industrial signal-processing role because its confirmed architecture is a 32-bit floating-point DSP peripheral processor with an 8 MHz maximum clock and 32-bit output data bus. Such a processor can execute recurring filtering and numerical operations deterministically while a supervisory controller handles sequencing and communications. The design should use floating-point arithmetic where dynamic range is valuable, but engineers must confirm cycle-level performance, memory timing, and interrupt behavior from the official family documentation. The 144-terminal PGA package also demands careful through-hole routing and ground continuity, making this approach better suited to established industrial controller layouts than space-constrained new compact products.
Recommandé
Communications Signal Conditioning
In communications equipment, ADSP-3221JG can provide a fixed-point-independent floating-point path for filtering, modulation analysis, and other repetitive numerical workloads. Its 32-bit output data bus supports transfer of processed data between the processor and surrounding system logic, while the 8 MHz maximum clock provides a defined timing reference for deterministic scheduling. The key trade-off is that the supplied evidence does not include memory bandwidth, accelerator counts, or I/O timing, so throughput must be modeled before commitment. A 5 V supply, clean clocking, and a carefully routed PGA-144 footprint are mandatory for reliable implementation in communications equipment.
Recommandé
Audio DSP Processing
ADSP-3221JG can serve as a dedicated audio arithmetic engine when a system needs reproducible floating-point filtering or transform operations without loading a general-purpose microcontroller. The 32-bit floating-point architecture provides ample numerical representation for audio control paths, while the 32-bit bus can move processed samples between the DSP and external interface logic. Actual audio suitability depends on unverified details such as supported serial interfaces, memory, and real-time performance, all of which must be checked in the manufacturer documentation. Engineers should also budget for low-noise 5 V distribution and continuous ground returns around the 144-pin PGA package.
Recommandé
Precision Instrumentation and Measurement
ADSP-3221JG is suitable for an instrumentation controller that performs recurring numerical correction, filtering, or analysis after data acquisition. Its floating-point ALU can simplify algorithms when scaling and dynamic range would make integer arithmetic cumbersome, while the 8 MHz maximum clock provides a documented upper operating reference. The supplied data does not confirm converter interfaces, memory capacity, latency, or temperature limits, so it cannot substitute for an application-specific timing and accuracy study. A robust implementation should synchronize the processor to a low-jitter clock, isolate analog and digital grounds, and use the official PGA-144 land pattern to avoid assembly-induced reliability issues.
Recommandé
Embedded Control and Automation
ADSP-3221JG can be paired with a host microcontroller as a specialized numerical coprocessor in factory automation, where filter banks, control transforms, or sensor-data calculations recur at predictable intervals. Delegating those operations to the 32-bit floating-point DSP peripheral can preserve responsiveness in the supervisory controller, while the processor's 32-bit output bus supports structured data exchange. A practical partition must account for shared-memory latency, interrupt overhead, and cache or memory behavior that is not disclosed in the verified snippets. The large PGA-144 package and 5 V supply arrangement should be included early in the mechanical and power-budget reviews.
Recommandé
Data Acquisition Front Ends
ADSP-3221JG can act as the processing centerpiece of a multi-channel data-acquisition front end when sampled data must pass through deterministic numerical stages. Floating-point execution supports gain correction, filtering, and spectral operations with a consistent numerical format, while the 32-bit output bus provides a defined path to storage or communications hardware. Before selecting the device, engineers must confirm supported data-acquisition interfaces and sufficient memory bandwidth because those specifications are absent from the supplied source set. Board implementation should use short return paths for converter signals, isolated clock distribution, and controlled 5 V bypassing to prevent numerical results from being degraded by supply noise.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADSP-3221JG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Package | Ceramic PGA-144 |
| Brand | Analog Devices |
| Processor Architecture | 32-bit floating-point DSP peripheral processor |
| Output Data Bus Width | 32 bit |
| Maximum Clock Frequency | 8 MHz |
| Nominal Voltage | 5 V |
| Temperature Grade | Commercial |
| Number of Terminals | 144 |
| Verified Unit Price as of 2026-10-23 | $192.4578 |
Principaux différenciateurs
- Confirmed 32-bit floating-point DSP peripheral architecture (vs General-purpose microcontroller alternatives)
- Deterministic 8 MHz maximum clock reference (vs Variable-clock embedded processors)
- Specialized ceramic PGA-144 implementation (vs Surface-mount DSP packages)
Notes de conception
Treat the ceramic PGA-144 footprint as a through-hole, high-pin-count layout constraint rather than a generic IC land pattern. Follow the official Analog Devices package drawing for drilling, pad sizes, and lead geometry, and verify the selected assembler supports the package. Route clocks, memory, and buses with short practical paths while preserving uninterrupted ground distribution; exact escape geometry must come from the manufacturer package data because it was not included in the verified source set.
Design the 5 V nominal rail for processor transients as well as steady-state load. The supplied data does not specify current, tolerance, ripple, or recommended capacitors, so no values should be inferred. Obtain those limits from the official datasheet, provide local high-frequency decoupling, and measure supply droop during maximum sustained computation. Keep the analog and digital return paths connected according to the system grounding strategy to minimize coupling into clock and signal-processing nodes.
Clock quality and memory-interface timing are likely to determine real-world signal integrity more than nominal processor width. Route the clock away from high-current outputs, use a defined reference and termination strategy from the family documentation, and validate timing at the intended 8 MHz maximum operating point. Because pin functions and I/O timing are not present in the verified listings, do not finalize routing or termination from generic assumptions; use the official pinout and timing tables.
Do not substitute a processor based only on the phrase 32-bit floating-point DSP. ADSP-3221JG combines that arithmetic format with a 32-bit output bus, 8 MHz maximum clock, 144 ceramic PGA terminals, and proprietary memory and peripheral interfaces. A replacement must be checked for pinout, voltage, clock, memory, interrupt, peripheral, and software compatibility. No verified drop-in substitute was found in the supplied cross-reference results, so treat unverified candidates as redesign-level options until formally qualified.
Informations de conformité
The verified listings identify a commercial temperature grade but provide no RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration. AEC-Q100 is not applicable because the verified data does not identify an automotive-qualified variant.