AK5554VN - 32-Bit 768 kHz 4-Channel Audio ADC | AKM
Référence : AK5554VN ✓ ActifAK5554VN Présentation
An audio ADC is a specialized data-converter IC that converts analog left- and right-channel audio signals into digital PCM or DSD data. It belongs to the ADC and DAC category within interface and signal-conversion ICs, where precision, noise performance, channel count, sampling rate, clocking, and digital-output compatibility determine suitability for recording, mixing, and playback equipment.
The AK5554VN supports up to 768 kHz sampling and four differential input channels. Its four-channel architecture suits multichannel recording systems, mixers, and digital recording consoles. Four selectable digital filters allow the conversion characteristics to be matched to different sound-quality priorities. The device also supports TDM audio formats for connection to a digital signal processor.
DSD output support extends to 11.2 MHz, providing a direct path for high-resolution digital audio workflows. Combined with the 32-bit conversion capability, 115 dB dynamic range, and 106 dB S/(N+D), the converter preserves fine amplitude and signal-to-noise information during capture. Its multi-channel and filter architecture reduces the need for parallel single-channel converters when designing professional audio equipment.
Typical applications include digital mixers, multichannel recorders, professional audio interfaces, broadcast equipment, and high-resolution studio capture systems. The AK5554VN is particularly relevant when a design requires both PCM operation and DSD output, or when differential analog inputs must feed a DSP through a TDM-compatible digital interface.
Designers should verify the external clock, analog input scaling, filtering, power-supply sequencing, and digital-interface voltage requirements against the manufacturer datasheet before layout. Differential routing, grounding, exposed-pad thermal management, and connector isolation are critical to preserving the advertised dynamic-range and S/(N+D) performance.
This page consolidates the verified manufacturer and distributor information for the AK5554VN, adds application-specific engineering guidance, identifies data that still requires datasheet confirmation, and avoids presenting unverified substitute parts as drop-in replacements.
Alternatives de remplacement direct pour AK5554VN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AK5554VN (même facteur de forme et même empreinte) — différant par Dynamic Range, Number of Channels, Package, Resolution.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesAK5554VN Valeurs maximales et caractéristiques électriques
| ADC Type | Delta-sigma audio A/D converter |
| Résolution | 32 bit |
| Maximum Sampling Rate | 768 kHz |
| Number of Channels | 4 channels |
| Input Configuration | Differential |
| Dynamic Range | 115 dB |
| Signal-to-Noise plus Distortion | 106 dB S/(N+D) |
| Digital Output Formats | PCM and DSD |
| Maximum DSD Output Frequency | 11.2 MHz |
| Digital Filter Options | 4 selectable filters |
| Digital Audio Interface | TDM-compatible |
| Boîtier | 48-pin QFN, 7 mm × 7 mm |
| Type de montage | Surface mount |
Guide de configuration des broches du AK5554VN 48-pin qfn, 7 mm × 7 mm
Configuration des broches du AK5554VN (boîtier 48-pin qfn, 7 mm × 7 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour AK5554VN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AK5554VN convient pour 6 applications: Digital Mixing Console, Multichannel Professional Recorder, High-Resolution Audio Interface, DSD Recording System, Broadcast and Studio Acquisition, DSP-Connected Audio Front End.
Digital Mixing Console
The AK5554VN fits a digital mixing console because four differential analog inputs can be converted at up to 768 kHz with 32-bit resolution, 115 dB dynamic range, and 106 dB S/(N+D). Its four selectable digital filters support different operating priorities, while TDM output provides a practical path to a digital signal processor. In a console architecture, multiple converter channels can feed one DSP, reducing parallel device count and simplifying synchronized clock distribution. The implementation must verify TDM slot allocation, supported master-clock ratios, logic levels, grounding, and whether the selected filter mode meets the console's latency and bandwidth requirements.
Recommandé
Multichannel Professional Recorder
The AK5554VN is appropriate for a multichannel recorder requiring four differential capture channels and high-resolution conversion. Its maximum sampling rate of 768 kHz supports high-speed recording workflows, while 32-bit conversion and a 115 dB dynamic range provide substantial headroom for professional source material. Four selectable filters allow the recorder to trade bandwidth, attenuation, noise, and latency according to the capture mode. In a multichannel chassis, the ADC can feed a DSP or digital routing engine over TDM, but channel synchronization, master-clock distribution, input references, and storage-format conversion must be engineered as one coherent clock tree.
Recommandé
High-Resolution Audio Interface
The AK5554VN can serve in a high-resolution audio interface where differential inputs, 768 kHz sampling, and DSD support are valuable. The 115 dB dynamic range and 106 dB S/(N+D) specifications indicate a converter designed for low-noise capture rather than general-purpose instrumentation. Its PCM and DSD output modes allow one converter to serve conventional PCM products and higher-resolution DSD-capable products. Interface-board designers must still establish input gain, common-mode margins, anti-alias filtering, channel isolation, and clock-source quality. Because the verified snippets do not provide the complete recommended circuit, its values and topology should be copied from the manufacturer application guidance.
Recommandé
DSD Recording System
The AK5554VN is specifically relevant to a DSD recording system because the verified datasheet result states DSD output support up to 11.2 MHz. Its four differential input channels permit simultaneous capture, while four selectable digital filters can be matched to different DSD operating modes and sound-quality objectives. The converter can feed a DSD-capable DSP or digital transport through its serial interface, subject to the required data, clock, and control formats. System validation must examine supported DSD rates, filter selection, latency, clock generation, and processor support because these implementation details are not fully included in the verified distributor summaries.
Recommandé
Broadcast and Studio Acquisition
The AK5554VN suits broadcast and studio acquisition systems that need high-resolution, multichannel conversion with flexible filtering. Four differential channels support balanced professional audio connections, while 768 kHz operation, 32-bit conversion, and 106 dB S/(N+D) provide useful headroom for demanding source capture. The selectable filters enable system designers to select among four conversion characteristics rather than accepting one fixed response. In studio equipment, low-noise analog layout, isolated clocking, balanced input routing, clean references, and careful exposed-pad thermal management are essential. These conditions preserve the converter's specified performance more effectively than digital processing can recover after an impaired analog capture stage.
Recommandé
DSP-Connected Audio Front End
The AK5554VN works well as a DSP-connected analog front end when the downstream processor requires high-resolution PCM or DSD data. TDM support provides a defined route for carrying multiple channels over a serial digital interface, reducing the number of separate data connections compared with independent parallel buses. The four differential inputs preserve channel separation at the converter stage, and 768 kHz sampling addresses high-speed acquisition requirements. DSP engineers must confirm supported word lengths, TDM slot widths, data alignment, frame timing, clock ratios, and audio-word latency. Firmware and hardware should be tested together because an apparently compatible ADC may still require different framing or filter-control behavior.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AK5554VN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Asahi Kasei Microdevices |
| Package | 48-pin QFN (7 mm × 7 mm) |
| Resolution | 32 bit |
| Maximum Sampling Rate | 768 kHz |
| Channel Count | 4 channels |
| Input Configuration | Differential |
| Dynamic Range | 115 dB |
| Signal-to-Noise plus Distortion | 106 dB S/(N+D) |
| Digital Output Formats | PCM and DSD |
| Maximum DSD Output Frequency | 11.2 MHz |
| Digital Filter Options | 4 selectable filters |
| Digital Audio Interface | TDM-compatible |
Principaux différenciateurs
- Combines four-channel conversion with high-resolution DSD output (vs Generic 32-bit four-channel PCM ADC)
- Supports four selectable digital filters (vs Single-response generic audio ADC)
- Targets high-speed professional audio capture (vs Standard-rate multichannel ADC)
Notes de conception
Route the four differential input pairs as controlled-impedance, closely matched traces with continuous ground reference and minimal asymmetry. Keep the analog input network close to the corresponding QFN pins, and separate the four channels until their common reference point to minimize crosstalk and sensitivity to external interference. The verified snippets do not provide complete recommended PCB artwork or component values, so grounding, trace geometry, and input termination must follow the current manufacturer datasheet and evaluation layout rather than being inferred from the package outline.
Treat the exposed pad of the 48-pin QFN as both an electrical connection and a thermal path, using the manufacturer-prescribed pad connection and copper arrangement. Place thermal vias near the pad where the recommended footprint permits them, while observing any restrictions around sensitive analog nodes. A verified junction-to-ambient resistance, maximum power dissipation, and junction-temperature limit were not provided, so thermal performance must be calculated from the final supply voltage, load, ambient temperature, and the datasheet limits obtained before release.
Do not interpret the 768 kHz PCM specification and the 11.2 MHz DSD figure as interchangeable sampling-rate claims. They describe different output modes with distinct clock, filter, and data-path requirements. Similarly, the presence of four filters does not establish that every mode supports every sample rate. Before schematic sign-off, verify the supported master-clock ratios, output formats, word length, TDM framing, DSD rates, and filter constraints in the manufacturer datasheet, then exercise each intended mode in hardware.
Informations de conformité
The supplied verified data does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. AEC-Q100 is treated as not applicable because this is an audio converter IC rather than an automotive-qualified device, but no automotive qualification is stated.
