ATMEGA168PV-10AN - AVR 8-bit MCU 16KB Flash 10MHz | Microchip
Référence : ATMEGA168PV-10AN ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.05 | $2,05 |
| 10 | $1.78 | $17,80 |
| 100 | $1.48 | $148,00 |
| 500 | $1.29 | $645,00 |
| 1 000 | $1.12 | $1 120,00 |
ATMEGA168PV-10AN Présentation
An 8-bit AVR microcontroller is a self-contained computing device that integrates a RISC processor core, program memory, data memory, and peripherals on a single chip, sitting at the entry level of the broader microcontroller (MCU) hierarchy within embedded systems and power-management silicon. The AVR architecture executes most of its 131 instructions in a single clock cycle, and the ATmega168P core is fully static, delivering up to 10 MIPS of throughput at 10 MHz.
Key features include 16KB (8K x 16) self-programmable Flash with read-while-write support, three flexible timers/counters with compare modes, a 10-bit ADC, USART serial interface, two-wire interface (I2C), and SPI. The picoPower technology enables very low power consumption in sleep modes, which is central to battery-powered designs.
Technically, the device uses the Harvard-architecture AVR 8-bit core with 32 general-purpose working registers directly connected to the ALU, allowing one-cycle instruction execution and high code efficiency. Non-volatile memory segments feature high endurance for repeated field updates.
Typical applications include battery-powered sensor nodes, industrial control panels, consumer appliance control, and hobby/education embedded platforms such as Arduino-compatible boards.
Design consideration: the 10 MHz speed-grade limit means system clock sources must not exceed 10 MHz, unlike the 20 MHz variants in the same footprint; verify fuses when reusing existing designs.
This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet, improving sourcing and design-in efficiency.
Alternatives de remplacement direct pour ATMEGA168PV-10AN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATMEGA168PV-10AN (même facteur de forme et même empreinte) — différant par Throughput, RoHS Status, Operating Temperature, Instruction Set, Timer/Counters.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ATMEGA168PA-ANR
✅ Remplacement direct✓ En stock
$1.44 / unité
Voir la fiche technique →ATMEGA168P-20AU
✅ Remplacement direct✓ En stock
$2.91 / unité
Voir la fiche technique →ATMEGA168A-AU
✅ Remplacement direct✓ En stock
$1.42 / unité
Voir la fiche technique →ATMEGA168-20AU
✅ Remplacement direct✓ En stock
$1.82 / unité
Voir la fiche technique →ATMEGA168PB-AUR
✅ Remplacement direct✓ En stock
$1.58 / unité
Voir la fiche technique →ATMEGA168PV-10AN Valeurs maximales et caractéristiques électriques
| Core Processor | AVR |
| Core Size | 8-bit |
| Speed | 10 MHz |
| Flash Memory Size | 16 KB (8K x 16) |
| EEPROM Size | 512 B |
| RAM Size | 1 KB |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Number of I/O | 23 |
| Timers/Counters | 3 |
| Instructions | 131 (most single-cycle) |
| Throughput | Up to 10 MIPS at 10 MHz |
| Data Converters | 10-bit ADC |
| Connectivity | USART, SPI, Two-Wire Interface (I2C) |
| Boîtier | 32-TQFP (7 x 7 mm) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de ATMEGA168PV-10AN
| Broche 1 | PD3 — Port D bit 3 (GPIO / INT1) |
| Broche 2 | PD4 — Port D bit 4 (GPIO / XCK/T0) |
| Broche 3 | GND — Ground |
| Broche 4 | VCC — Digital supply voltage |
| Broche 5 | GND — Ground |
| Broche 6 | VCC — Digital supply voltage |
| Broche 7 | PB6/XTAL1 — Port B bit 6 / crystal oscillator input / TOSC1 |
| Broche 8 | PB7/XTAL2 — Port B bit 7 / crystal oscillator output / TOSC2 |
| Broche 9 | PD5 — Port D bit 5 (GPIO / T1) |
| Broche 10 | PD6 — Port D bit 6 (GPIO / AIN0) |
| Broche 11 | PD7 — Port D bit 7 (GPIO / AIN1) |
| Broche 12 | PB0 — Port B bit 0 (GPIO / ICP1 / CLKO) |
| Broche 13 | PB1 — Port B bit 1 (GPIO / OC1A) |
| Broche 14 | PB2 — Port B bit 2 (GPIO / SS / OC1B) |
| Broche 15 | PB3 — Port B bit 3 (GPIO / MOSI / OC2A) |
| Broche 16 | PB4 — Port B bit 4 (GPIO / MISO) |
| Broche 17 | PB5 — Port B bit 5 (GPIO / SCK) |
| Broche 18 | AVCC — Analog supply voltage for ADC |
| Broche 19 | ADC6 — ADC input channel 6 |
| Broche 20 | AREF — Analog reference voltage for ADC |
| Broche 21 | GND — Ground |
| Broche 22 | ADC7 — ADC input channel 7 |
| Broche 23 | PC0 — Port C bit 0 (GPIO / ADC0 / SCL) |
| Broche 24 | PC1 — Port C bit 1 (GPIO / ADC1 / SDA) |
| Broche 25 | PC2 — Port C bit 2 (GPIO / ADC2 / TCK) |
| Broche 26 | PC3 — Port C bit 3 (GPIO / ADC3 / TMS) |
| Broche 27 | PC4 — Port C bit 4 (GPIO / ADC4 / TDO) |
| Broche 28 | PC5 — Port C bit 5 (GPIO / ADC5 / TDI) |
| Broche 29 | PC6/RESET — Port C bit 6 / Reset input (active low) |
| Broche 30 | PD0/RXD — Port D bit 0 / USART receive |
| Broche 31 | PD1/TXD — Port D bit 1 / USART transmit |
| Broche 32 | PD2 — Port D bit 2 (GPIO / INT0) |
Applications typiques
ATMEGA168PV-10AN convient pour 6 applications: Battery-Powered Sensor Nodes, Industrial Control Panels, Consumer Appliance Control, Education and Arduino-Compatible Boards, Handheld and Portable Instruments, Smart Home / IoT Endpoint Devices.
Battery-Powered Sensor Nodes
The ATMEGA168PV-10AN fits battery-powered sensor nodes because its picoPower architecture minimizes sleep-mode current while the 1.8V to 5.5V supply range allows direct operation from two AA cells without a boost converter. The integrated 10-bit ADC digitizes sensor outputs directly, and the USART or Two-Wire Interface connects to RF modules or displays. The 16KB Flash accommodates a full sensing-plus-protocol firmware image, while 1KB SRAM buffers measurement data between radio transmissions. Placing the MCU in power-down sleep between samples and waking on a timer interrupt extends battery life to multi-year levels in duty-cycled monitoring products.
Recommandé
Industrial Control Panels
In industrial control panels, the ATMEGA168PV-10AN provides deterministic 8-bit control with three timers/counters offering compare modes for PWM actuator drive and precise event timing. The wide 1.8V to 5.5V supply range tolerates unregulated rail variation typical of factory floors, while 23 general-purpose I/O lines drive relays, read switches, and interface to indicators. The USART links to HMI terminals or RS-485 transceivers via an external converter. Running at 10 MHz keeps radiated emissions low, easing EMC compliance in control cabinets. The 16KB self-programmable Flash supports field firmware updates through a bootloader, reducing maintenance cost over the product lifetime.
Recommandé
Consumer Appliance Control
The ATMEGA168PV-10AN suits consumer appliance control boards where low cost, low EMI, and reliability dominate. Its fully static AVR core executes control loops for motors, heaters, and displays with single-cycle instructions, while the 10-bit ADC reads temperature sensors and user potentiometers. The Two-Wire Interface manages EEPROM configuration chips or capacitive touch controllers, and the 512B EEPROM stores user settings across power cycles. The 32-TQFP 7 x 7 mm package fits compact two-layer PCBs typical of appliance controllers. RoHS compliance and Microchip's long product-lifecycle policy for AVR parts support multi-year appliance production without redesign.
Recommandé
Education and Arduino-Compatible Boards
The ATMEGA168PV-10AN is well suited to educational and Arduino-compatible platforms because the ATmega168 core underpinned early Arduino hardware, and AVR toolchains (AVR-GCC, avrdude, Arduino IDE) support it natively. The 10 MHz limit requires a matching board profile or bootloader/fuse configuration when reusing 16 MHz Arduino sketches. The ISP In-System Programming interface allows bootloading through a standard 6-pin header, making it ideal for teachable lab kits. The 1.8V to 5.5V operating range lets students experiment safely at 3.3V with sensors while retaining 5V peripheral compatibility, and 131 mostly single-cycle instructions make assembly-level teaching straightforward.
Recommandé
Handheld and Portable Instruments
Portable handheld instruments benefit from the ATMEGA168PV-10AN combination of picoPower sleep modes and a 1.8V to 5.5V supply range, allowing single-cell or coin-cell designs with long standby life. The 10-bit ADC samples measurement front ends, and the USART or SPI streams readings to displays or logging interfaces. The 32-TQFP surface-mount package with 0.8 mm pitch fits compact instrument PCBs, while the fully static core retains register state at low clock rates for flexible power gating. The 16KB Flash hosts menu systems, calibration tables in EEPROM, and communication protocols, giving a complete single-chip instrument controller.
Recommandé
Smart Home / IoT Endpoint Devices
For smart home and IoT endpoint devices, the ATMEGA168PV-10AN offers an energy-conscious controller that pairs with external RF modules over USART or SPI. The picoPower sleep modes keep quiescent draw negligible between wake events, extending battery life in door sensors, thermostats, and actuators. The 10-bit ADC monitors supply voltage and environmental sensors, the 512B EEPROM stores device identity and calibration, and the Two-Wire Interface manages configuration peripherals. Running at 10 MHz limits switching harmonics, simplifying unintentional-radiator EMC design for wireless products. The 16KB self-programmable Flash enables over-the-wire firmware updates via a resident bootloader.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATMEGA168PV-10AN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATMEGA168PA-ANR | ATMEGA168P-20AU | ATMEGA168PB-AUR |
|---|---|---|---|---|
| Package | 32-TQFP (7 x 7 mm) | 32-TQFP (7 x 7 mm) - same | 32-TQFP (7 x 7 mm) - same | 32-TQFP (7 x 7 mm) - same |
| Brand | Microchip Technology (Atmel) | Microchip Technology | Microchip Technology | Microchip Technology |
| Max CPU Speed | 10 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB |
| EEPROM | 512 B | 512 B | 512 B | 512 B |
| SRAM | 1 KB | 1 KB | 1 KB | 2 KB |
| Supply Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| picoPower Technology | Yes (PV variant) | Yes (PA variant) | Yes (P variant) | Yes (PB variant) |
| Silicon Generation | picoPower P (original PV grade) | picoPower PA revision | picoPower P | 2nd-generation PB |
Principaux différenciateurs
- 10 MHz speed grade for low-EMI, lowest-voltage operation (vs ATMEGA168P-20AU)
- picoPower silicon revision (vs ATMEGA168-20AU)
- Register-level code compatibility with legacy mega168 firmware (vs ATMEGA168PB-AUR)
Notes de conception
The PV variant supports 1.8V to 5.5V operation, but the ADC needs AVCC within its specified range and analog accuracy degrades near the low end; for 10-bit ADC precision, bias AVCC with an RC filter from the digital VCC rail and use the internal 1.1V reference or an external AREF. At 10 MHz the device is safely within the voltage-vs-frequency curve across the whole supply range, unlike 20 MHz parts that require higher VCC for top-speed operation.
Place 100 nF ceramic decoupling capacitors directly across each VCC/GND pin pair (pins 4-3 and 6-5), and a separate 100 nF on AVCC (pin 18) plus 10 nF on AREF (pin 20) to ground. Route the crystal (pins 7-8) with short traces and local ground guard. The TQFP-32 0.8 mm pitch requires careful solder-paste stencil design; a 7 x 7 mm footprint with standard courtyards avoids reflow bridging.
The most common failure when reusing ATmega168 designs is exceeding the 10 MHz speed grade of the PV-10AN: installing a 16 MHz crystal or copying fuses from a 20 MHz variant causes out-of-spec operation. Second, keep RESET (pin 29) from floating; use a 10k pull-up or enable the internal BOD fuse to prevent spurious resets. Finally, when substituting the PB variant, remember it needs recompiled firmware due to register and peripheral differences.
Informations de conformité
RoHS compliance per DigiKey/Mouser product listings. REACH, halogen-free, and conflict-minerals declarations should be confirmed on the Microchip product page.