ATMXT336S-MAUR - 336-Node Touchscreen Controller IC | Microchip
Référence : ATMXT336S-MAUR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.5 | $4,50 |
| 10 | $4.05 | $40,50 |
| 100 | $3 | $300,00 |
| 500 | $2.95 | $1 475,00 |
| 20 000 | $2.83 | $56 600,00 |
ATMXT336S-MAUR Présentation
A capacitive touchscreen controller is a mixed-signal IC that drives and senses a grid of mutual-capacitance nodes on a touch panel, converts raw capacitance changes into digitized touch coordinates, and reports gesture data to a host processor. Within the power management and human-interface hierarchy, it sits between the passive touch panel and the application processor, forming part of the sensor and interface IC layer of a mobile system.
Key features include 336 mutual-capacitance sensing nodes, support for 2.0 mm passive stylus input, moisture robustness for wet-finger tracking, and superior electrical noise immunity for operation in hostile AC-charger and display-noise environments, according to the Microchip product page.
The maXTouch architecture uses patented capacitive touch acquisition technology with on-chip signal processing, enabling high signal-to-noise ratio touch reporting at high report rates. This makes the mXT336S well suited to dense sensor patterns on thin phone form factors where water rejection and stylus resolution are critical differentiators.
Typical applications include premium smartphone touchscreens, small-to-medium tablet and phablet panels, and portable consumer devices requiring passive stylus support and wet-hand operation.
When designing with the mXT336S, confirm panel node count and pin mapping against the maXTouch family configuration, and note that Microchip officially recommends the ATMXT336U as the alternative touch controller for this part.
This page synthesizes verified distributor pricing, the Microchip-recommended alternative, drop-in family options, and practical sourcing guidance not consolidated in the manufacturer datasheet alone.
Alternatives de remplacement direct pour ATMXT336S-MAUR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATMXT336S-MAUR (même facteur de forme et même empreinte) — différant par Product Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ATMXT336S-MAUD
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATMXT336S-A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATMXT336U
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATMXT336T-MAU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATMXT336S-MAUR Valeurs maximales et caractéristiques électriques
| Product Type | Capacitive Touchscreen Controller IC |
| Series | maXTouch (mXT336S) |
| Touch Sensing Nodes | 336 nodes |
| Sensing Technology | Mutual capacitance (projected capacitive) |
| Passive Stylus Support | 2.0 mm passive stylus |
| Moisture Robustness | Yes (wet-finger tracking) |
| Noise Immunity | Superior electrical noise immunity |
| Target Application | High-performance smartphones |
| Category (Distributor) | Sensor, Capacitive Touch |
| Statut RoHS | RoHS Compliant |
| Lead Free Status | Lead free |
| Type de montage | Surface Mount |
| Package Code | MAU |
| Packaging | Tape & Reel (R suffix) |
Guide de configuration des broches du ATMXT336S-MAUR mau
Configuration des broches du ATMXT336S-MAUR (boîtier mau). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATMXT336S-MAUR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATMXT336S-MAUR convient pour 6 applications: Premium Smartphone Touchscreens, Tablet and Phablet Panels, Passive Stylus Note-Taking Devices, Wet-Environment Consumer Devices, Automotive Touchscreens (via mXT336S-A), High-Volume Consumer Electronics Manufacturing.
Premium Smartphone Touchscreens
The ATMXT336S-MAUR is purpose-built for high-performance smartphones, using Microchip's patented capacitive touch technology to deliver 336 mutual-capacitance nodes for dense, fine-pitch sensor patterns on thin phone stacks. Its 2.0 mm passive stylus support enables pen-like drawing accuracy without an active stylus, while moisture robustness keeps tracking reliable with wet fingers, a common real-world failure mode for lesser controllers. Superior electrical noise immunity maintains touch accuracy against charger and display noise in slim, antenna-dense phones. Implemented as the controller between the ITO sensor and the application processor over the host interface, it reports filtered touch and gesture data at high report rates. The trade-off is that a 336-node controller consumes more processing and panel-design effort than lower-count variants, but it is the cost of premium touch UX.
Recommandé
Tablet and Phablet Panels
Mid-size tablet and phablet panels need high node counts to preserve linearity across larger active areas, and the mXT336S's 336 sensing nodes provide the density required for accurate multi-touch and passive stylus input on screens up to the 7-inch class that Microchip cites for this family. Moisture robustness matters in tablets used in kitchens, education, and field service where wet or damp hands are routine, and the mXT336S's wet-finger tracking directly addresses that scenario. Its noise immunity is equally important because tablets integrate bright displays and fast chargers that couple noise into the touch sensor. In the signal chain, the controller drives the sensor grid, acquires mutual capacitance, and streams digitized touches to the SoC. Designers should budget for panel-profile tuning to match the specific ITO pattern and stack-up.
Recommandé
Passive Stylus Note-Taking Devices
Digital note-taking products that use inexpensive passive (capacitive) styli rather than active pens benefit directly from the mXT336S's 2.0 mm passive stylus support, which resolves the fine tip geometry that generic controllers smear into large blobs. The 336-node grid supplies the spatial sampling needed for legible handwriting, while on-chip acquisition processing maintains a stable signal-to-noise ratio so stroke jitter stays low during fast writing. Moisture robustness prevents hand-contact artifacts around the writing palm, and noise immunity keeps the input stable while the device charges over a USB charger, exactly when note-taking sessions typically occur. As with any passive-stylus design, linearity across the display edge should be validated during panel tuning; the controller's stylus performance depends on sensor geometry as well as firmware configuration.
Recommandé
Wet-Environment Consumer Devices
Devices used outdoors or in humid environments, such as ruggedized phones, marine handhelds, and outdoor kiosks, must keep touch functionality intact with rain, condensation, or wet gloves-and-fingers conditions. The mXT336S is explicitly specified for moisture robustness, meaning its acquisition algorithm rejects water-film capacitance that causes ghost touches on standard controllers. Combined with superior electrical noise immunity, it remains reliable when the device is also connected to a noisy charger or sits near high-brightness LED backlight drivers. In the system, the controller sits between the shielded or unshielded sensor stack and the host MCU, filtering raw capacitance frames and reporting only valid touches. Designers should pair it with panel materials tested for water rejection; the controller handles the signal side but the cover-lens and sensor design determine the wet-touch ceiling.
Recommandé
Automotive Touchscreens (via mXT336S-A)
For infotainment and climate-control touchscreens, the automotive-qualified mXT336S-A extends this family into vehicles, optimized for 7-inch displays and enabling single-layer shieldless sensor designs that reduce cost and stack thickness. While the consumer ATMXT336S-MAUR itself is not the AEC-qualified part, its architecture is the same maXTouch platform, so panel profiles and tuning experience port directly when moving to the -A variant. Automotive cabins impose severe noise conditions, including inverters, RF transceivers, and fast chargers, which the maXTouch noise-immunity architecture is designed to tolerate. In a vehicle HMI, the controller reports touch and hover data to the head-unit SoC over the host interface and must maintain accuracy under glove, wet, and multi-touch use. Programs requiring formal qualification documentation should order the -A suffix part rather than the consumer MAUR.
Recommandé
High-Volume Consumer Electronics Manufacturing
For contract manufacturers building millions of touch devices per year, the ATMXT336S-MAUR ships on tape and reel, the -R packaging suffix, for automated pick-and-place lines, and is lead free and RoHS compliant to meet global environmental regulations. Verified channel data shows 20000-piece stock positions and volume pricing near $2.83 per unit at 20000+ quantity as of 2026-09-19, supporting aggressive BOM targets in cost-driven consumer hardware. The tray-packed ATMXT336S-MAUD variant serves engineering builds and low-speed lines without changing the PCB footprint, since the silicon and package are identical. For supply-chain resilience, Microchip officially designates the ATMXT336U as the alternative touch controller, giving procurement a sanctioned second source within the maXTouch roadmap. Buyers should confirm date codes and reel quantities with distributors before releasing large production orders.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATMXT336S-MAUR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATMXT336S-MAUD | ATMXT336S-A | ATMXT336U | ATMXT336T-MAU |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | MAU surface-mount (tape & reel) | MAU surface-mount (tray) - same footprint | MAU surface-mount (automotive) - same footprint | maXTouch surface-mount - verify footprint on PCB | MAU surface-mount - same footprint |
| Touch Sensing Nodes | 336 nodes | 336 nodes | 336 nodes | 336 nodes | 336 nodes (T-series configuration) |
| Target Market | High-performance smartphones (consumer) | Consumer (same market) | Automotive (AEC-grade, 7-inch optimized) | Consumer (recommended alternative) | Consumer (T-series) |
| RoHS / Lead Free | RoHS Compliant / Lead free | RoHS Compliant / Lead free | RoHS Compliant / Lead free | RoHS Compliant / Lead free | RoHS Compliant / Lead free |
Principaux différenciateurs
- 2.0 mm passive stylus support (vs ATMXT336T-MAU)
- Officially sanctioned migration path (vs ATMXT336U)
- Consumer cost versus automotive qualification (vs ATMXT336S-A)
Notes de conception
Do not confuse the ordering suffixes when purchasing: -MAUR is tape and reel for automated assembly, while -MAUD is tray packing of the identical die. They are electrically interchangeable on the same PCB, but mixing reel and tray quantities disrupts SMT line planning. Additionally, Microchip explicitly designates ATMXT336U as the recommended alternative for the mXT336S; treat any other family member (336T, 336S-A) as requiring panel-profile revalidation, because node mapping and firmware configuration differ even within the same node count.
The mXT336S is specified for superior electrical noise immunity and moisture robustness, but its real-world performance depends on the sensor stack. Route touch sense lines away from switching regulators, backlight LED drivers, and RF antenna feeds, and follow Microchip's maXTouch panel layout guidance for guard and shield placement. For wet-finger applications, validate the moisture algorithm against your cover-lens material and ITO geometry during panel tuning; the controller's wet-touch rejection is only as good as the sensor design it drives.
Place the mXT336S controller close to the touch sensor flex-tail connector to keep sense-line loop area small and reduce coupled noise from the display and charger. Use solid ground plane under the controller but keep copper off the flex routing region per Microchip panel guidelines. Decouple the supply per the manufacturer datasheet recommendations with local ceramic capacitors at the supply pins. For 2.0 mm passive stylus accuracy, the sensor pattern linearity near display edges matters as much as controller resolution, so review the panel design together with the controller placement.
Informations de conformité
Lead free / RoHS Compliant per distributor listing (IC-components-distributor.com). Automotive AEC-Q100 grade is covered by the ATMXT336S-A variant, not this consumer part. REACH, halogen-free, and conflict-minerals status not stated in provided data.
