BCM53283MKPBG - 16FE + 2GE Ethernet Switch | Broadcom
Référence : BCM53283MKPBG ✗ Fin de vieBCM53283MKPBG Présentation
An Ethernet switch controller is a semiconductor device that manages traffic between multiple Ethernet ports and connects those ports to a host or network processor. The BCM53283MKPBG belongs to the Broadcom family of Ethernet interface controllers, combining PHY and switching functions in one package. The integrated 16FE ports reduce the need for discrete Ethernet transceivers, while the two Gigabit Ethernet ports provide higher-bandwidth uplink or server-facing connections. The device is also identified with an MII/RvMII interface capability.
Key features include 16 Fast Ethernet PHYs, two Gigabit Ethernet ports, GMII and RGMII support, MII and RvMII interface support, and support for IEEE 802.1Q, IEEE 802.1QAV, IEEE 802.1QBV, and IEEE 802.1AD networking functions. The integrated switch fabric allows network equipment designers to consolidate multiple copper Ethernet connections into a compact solution. Its 400-pin PBGA package supports the high pin count required for parallel network interfaces and multiple PHY connections.
The BCM53283MKPBG is intended for industrial networking, access equipment, set-top boxes, routers, switches, and other systems requiring many Ethernet front-panel ports. Its combination of 16FE and 2GE connectivity supports designs where legacy 100M ports coexist with Gigabit Ethernet uplinks. The device can serve as a central interface component between physical copper ports and an external switch fabric, network processor, or host processor. Exact operating voltages, clock requirements, PHY register behavior, thermal limits, and package dimensions must be confirmed from the manufacturer datasheet.
Because this device contains integrated PHYs and a high-speed switching interface, PCB layout is critical. Differential Ethernet pairs require controlled impedance, continuous reference planes, minimized stubs, and separation from noisy switching and power-conversion circuitry. The manufacturer datasheet should be used to assign every ball, configure the integrated PHYs, select termination and magnetics components, and determine the required clock and decoupling network. The package also requires thermal-via and ground-pad planning appropriate for a 400-pin PBGA assembly.
When designing around the BCM53283MKPBG, confirm that the required number of Fast Ethernet and Gigabit Ethernet ports matches the product’s stated 16FE and 2GE configuration. Check PHY register defaults, auto-negotiation behavior, media-access interface timing, and external network-processor requirements before freezing the schematic. A Request a Quote form on this page can be used for current commercial availability, lead time, and ordering information.
This product page combines the Broadcom device identity, Ethernet switch and PHY configuration, package information, comparison fields, application guidance, and practical PCB considerations for engineers evaluating the BCM53283MKPBG in multiport Ethernet equipment.
Alternatives de remplacement direct pour BCM53283MKPBG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesBCM53283MKPBG Valeurs maximales et caractéristiques électriques
| Product Type | Ethernet switch controller with integrated PHYs |
| Fast Ethernet Ports | 16 FE |
| Gigabit Ethernet Ports | 2 GE |
| Total Ethernet Ports | 18 ports |
| Gigabit Ethernet Interface | GMII and RGMII |
| Media Access Interface | MII and RvMII |
| Integrated PHY Count | 16 Fast Ethernet PHYs |
| Boîtier | 400-pin PBGA |
| Type de montage | Surface mount |
| Device Class | Ethernet controller / Ethernet switch PHY |
| IEEE 802.1AD Support | Supported |
| IEEE 802.1Q Support | Supported |
| IEEE 802.1QAV Support | Supported |
| IEEE 802.1QBV Support | Supported |
| Statut RoHS | Compliant |
Guide de configuration des broches du BCM53283MKPBG 400-pin pbga
Configuration des broches du BCM53283MKPBG (boîtier 400-pin pbga). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour BCM53283MKPBG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
BCM53283MKPBG convient pour 6 applications: Industrial Ethernet Gateway, Carrier-Grade Access Equipment, Network Switch Platform, Router and Edge Processing, Set-Top and Media Equipment, Power and Building Automation.
Industrial Ethernet Gateway
The BCM53283MKPBG fits an industrial Ethernet gateway that must expose many 100M copper ports while retaining two Gigabit Ethernet links for an upstream controller or network backbone. Its 16 integrated Fast Ethernet PHYs reduce the component count associated with discrete PHY implementations, while GMII and RGMII provide selectable high-speed connectivity to the host processor. The IEEE 802.1Q, IEEE 802.1QAV, IEEE 802.1QBV, and IEEE 802.1AD capabilities support VLAN-aware and scheduled traffic designs. Final suitability depends on the gateway’s temperature range, isolation requirements, environmental protection, and host software model.
Recommandé
Carrier-Grade Access Equipment
The BCM53283MKPBG can support access equipment with a large number of Fast Ethernet subscriber-facing ports and Gigabit Ethernet distribution links. Its integrated 16FE PHY block suits equipment where front-panel port density is more important than using one controller per copper connection. VLAN tagging through IEEE 802.1Q and provider-oriented tagging through IEEE 802.1AD are relevant to access-network designs. Designers should confirm PHY management behavior, copper magnetics selection, line-card power budget, and thermal performance in the target access platform before final component approval.
Recommandé
Network Switch Platform
The BCM53283MKPBG is suited to an OEM network switch platform combining 16 Fast Ethernet access ports with two Gigabit Ethernet uplinks. The 2GE ports can connect to a higher-performance switching or processing tier through GMII or RGMII, while the 16FE ports handle edge traffic. IEEE 802.1Q, IEEE 802.1QAV, and IEEE 802.1QBV support is valuable for tagged, shaped, or scheduled traffic. Because the device is a controller rather than a finished switch, the design still needs a host processor, firmware, clocks, magnetics, power design, and thermal implementation.
Recommandé
Router and Edge Processing
A router or edge-processing product can use the BCM53283MKPBG to consolidate legacy Fast Ethernet service ports with two faster Gigabit Ethernet links. The Gigabit interfaces support GMII and RGMII, allowing the board architect to match the processor interface and prioritize simpler parallel routing or reduced pin count. The integrated PHYs simplify board-level integration, but signal integrity across the large 400-pin PBGA remains a central concern. Differential pair routing, reference-plane continuity, magnetics placement, and thermal-via density require careful implementation and simulation.
Recommandé
Set-Top and Media Equipment
The BCM53283MKPBG can serve set-top and media equipment that combines several Fast Ethernet service connections with one or two Gigabit Ethernet links. A single integrated controller may reduce PCB footprint compared with separate multi-PHY components, while IEEE 802.1Q-related functions support tagged service traffic. The implementation should account for the 400-pin PBGA assembly requirements, Ethernet magnetics or integrated PHY details, host-processor timing, and enclosure thermal conditions. Consumer-product EMC, safety, and update requirements should also be verified independently of the semiconductor specifications.
Recommandé
Power and Building Automation
The 16FE plus 2GE configuration of the BCM53283MKPBG can support building-automation controllers, power-management equipment, and multi-room network gateways that need many low-speed copper endpoints alongside faster uplinks. Integrated PHYs can shorten interconnections compared with a discrete-PHY architecture, while RGMII can reduce host-side pin demand when board routing is constrained. For deployment inside power equipment, engineers must validate conducted and radiated emissions, surge exposure, isolation strategy, operating temperature, and long-term availability rather than relying only on Ethernet functional equivalence.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour BCM53283MKPBG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Broadcom |
| Package | 400-pin PBGA |
| Fast Ethernet Ports | 16 FE |
| Gigabit Ethernet Ports | 2 GE |
| Total Ethernet Ports | 18 ports |
| Gigabit Ethernet Interfaces | GMII and RGMII |
| Media Access Interface | MII and RvMII |
| IEEE 802.1Q Support | Supported |
| IEEE 802.1QAV and IEEE 802.1QBV Support | Supported |
| IEEE 802.1AD Support | Supported |
| RoHS Status | Compliant |
| Mounting Type | Surface mount |
Principaux différenciateurs
- High copper-port integration in one controller (vs Single-port Ethernet interface controllers)
- Flexible Gigabit Ethernet host connectivity (vs RGMII-only interface designs)
- Built-in time-aware and VLAN-oriented functions (vs Basic single-port Ethernet controllers)
Notes de conception
Treat the 400-pin PBGA as a high-density, high-speed routing structure rather than as a generic leadless package. Assign Ethernet differential pairs from the manufacturer pin map, maintain continuous reference planes beneath each pair, avoid split-plane crossings, and keep magnetics or termination networks close to the corresponding PHY pins. Route clock and management signals away from switching-node and power-converter return currents. Validate the final stack-up with field solvers because package escape geometry and BGA breakout determine whether a nominal 90-ohm differential target is achievable.
Plan thermal relief and via arrays beneath the 400-pin PBGA before schematic sign-off. The device’s integrated PHY and switch circuitry can create local temperature gradients across the package, so ground-ball access, top and bottom copper, and thermal vias should be evaluated as one thermal path. Use the manufacturer’s power data and recommended land pattern for junction-temperature calculations. A thermal solution that works at room temperature may still be inadequate when the enclosure has restricted airflow or the surrounding electronics operate near their heat limits.
Do not approve a PCB merely because a candidate controller has a similar Ethernet port count. Confirm the exact BCM53283MKPBG ball assignments, supply rails, sequencing, reference clocks, reset requirements, management signals, and PHY magnetics or transformer requirements against the manufacturer datasheet. Also confirm whether the intended design relies on GMII or RGMII for each 2GE port and whether MII or RvMII is required at the host side. Interface timing and firmware assumptions can invalidate an otherwise similar pin arrangement.
Informations de conformité
The Broadcom part listing identifies the device as RoHS compliant. Reach, lead-free status, halogen-free status, and conflict-minerals status are not stated in the available product references.