C8051F320 - 8-Bit 25MHz USB MCU, 16KB Flash | Silicon Labs
Référence : C8051F320 ✓ ActifC8051F320 Présentation
A microcontroller is a programmable integrated circuit containing a processor core, memory, and dedicated peripherals. The C8051F320 belongs to the 8051 family, combining a legacy-compatible instruction set with a high-speed pipeline, USB device connectivity, and mixed-signal peripherals. It is suitable for embedded control systems where USB connectivity and analog measurement are needed in one package.
Principal features include 16KB of in-system programmable flash, a 10-bit ADC capable of 200 ksps, up to 17 single-ended or 13 differential external inputs, two comparators, and selectable analog references. The ADC reference can come from an external pin, an internal reference, or VDD. Additional analog features include a built-in temperature sensor and an external conversion-start input.
The device uses the Silicon Labs C2 two-wire debug architecture, providing full-speed, non-intrusive debugging in the finished application. Its USB interface supports designs that need direct connectivity to a host computer, while the 8051 core provides broad compatibility with established 8051 software ecosystems and development tools.
Typical uses include USB-connected data acquisition, industrial control modules, temperature measurement, battery-operated instrumentation, and compact consumer peripherals. The integrated ADC and comparators reduce the need for external signal-conditioning and conversion components when the measured signals fall within the device's analog input limits.
Designers should budget decoupling capacitance at each supply pin, route the USB differential pair as a controlled-impedance connection, and use the C2 interface for production debugging. Before upgrading an existing 8051 design, verify software timing, interrupt priorities, memory usage, and USB enumeration requirements against the manufacturer datasheet.
This page consolidates verified distributor availability, family-level technical data, practical application guidance, and same-footprint family comparisons that are not presented together in the manufacturer datasheet.
Alternatives de remplacement direct pour C8051F320 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
C8051F321-GQ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F120-GQ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F121-GQ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F320 Valeurs maximales et caractéristiques électriques
| Core | Enhanced 8-bit 8051 core |
| Fréquence d'horloge maximale | 25 MHz |
| Peak Throughput | 25 MIPS |
| Flash Memory | 16KB (16K x 8) |
| Program Memory Type | In-system programmable flash |
| ADC Resolution | 10 bit |
| Maximum ADC Sampling Rate | 200 ksps |
| External ADC Inputs | 17 single-ended or 13 differential |
| ADC Reference Options | External pin, internal reference, or VDD |
| Comparators | 2 |
| Built-in Temperature Sensor | Yes |
| External Conversion Start Input | Yes |
| USB Interface | Full-speed USB |
| Debug Interface | Silicon Labs C2, 2-wire, non-intrusive |
| Boîtier | 32-LQFP (7x7 mm) |
| Type de montage | Surface mount |
Guide de configuration des broches du C8051F320 32-lqfp (7x7 mm)
Configuration des broches du C8051F320 (boîtier 32-lqfp (7x7 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour C8051F320.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
C8051F320 convient pour 6 applications: USB-Connected Data Acquisition, USB-Firmware Update Gateway, Temperature Monitoring Controller, Industrial Control and Sensor Interface, Battery-Powered Portable Instrument, Consumer Control Module with USB.
USB-Connected Data Acquisition
The C8051F320 is well suited to a compact USB data-acquisition module because it combines a 25 MHz, 25 MIPS 8051 core with a 10-bit ADC sampling at up to 200 ksps. Up to 17 single-ended or 13 differential external inputs allow several sensors or analog channels to share one controller. The full-speed USB interface can stream measurements to a host without requiring a separate communications processor. Use the external conversion-start input when deterministic sampling must be tied to an external event, and place input protection and anti-alias filtering ahead of the ADC pins.
Recommandé
USB-Firmware Update Gateway
A firmware-update gateway benefits from the C8051F320's 16KB of in-system programmable flash and full-speed USB interface. The controller can receive a new image through USB, validate it in the available program memory, and update the installed device while retaining the C2 debug path for production troubleshooting. This architecture reduces manufacturing complexity compared with a socketed-programming approach. Firmware must include boundary checks, interruption-safe flash writes, and rollback handling because the available flash capacity is only 16KB.
Recommandé
Temperature Monitoring Controller
The built-in temperature sensor gives the C8051F320 a compact path for enclosure or board-level thermal monitoring without requiring an external analog sensor. Its 10-bit ADC and selectable internal, external, or VDD reference support calibrated measurement of thermistors, analog transducers, and other sensors sharing the same controller. The 25 MIPS execution rate allows filtering and conversion averaging to be performed locally before data is reported over USB. Accuracy depends on the reference implementation, sensor placement, calibration, and PCB thermal conditions.
Recommandé
Industrial Control and Sensor Interface
The C8051F320 can serve as the local controller in an industrial sensor interface because its 8051 core provides deterministic execution while the two comparators support threshold detection and the ADC handles analog measurement. Inputs can be sampled at up to 200 ksps, and the external conversion-start feature permits event-driven acquisition rather than continuous polling. The same device can supervise control outputs and report status over USB. Industrial deployment still requires appropriate transient protection, isolation, grounding, and environmental qualification beyond the base MCU specifications.
Recommandé
Battery-Powered Portable Instrument
For a battery-powered portable measurement device, the C8051F320 consolidates processing, flash, USB, ADC, and comparators into one 32-LQFP package, reducing component count and board area. The 16KB ISP flash supports compact application code, while the 10-bit ADC supports analog front-end conditioning and the C2 interface preserves a production programming path. USB can provide both power and data in a tethered operating mode. Actual battery life cannot be inferred from the supplied excerpts because the operating voltage and active or sleep current values were not provided.
Recommandé
Consumer Control Module with USB
The C8051F320 is appropriate for a compact consumer control module that needs USB connectivity, event handling, and a few analog inputs without a high-pin-count processor. The 25 MIPS pipelined 8051 core supports protocol handling and user-interface logic, while the two comparators can implement simple limit detection and the ADC can monitor analog controls. Its 32-LQFP package is appropriate for a compact PCB, although the exact dimensions and exposed-pad arrangement should be confirmed from the package drawing before layout release.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour C8051F320 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | C8051F321-GQ | C8051F120-GQ | C8051F121-GQ |
|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same |
| Brand | Silicon Laboratories | Silicon Laboratories | Silicon Laboratories | Silicon Laboratories |
Principaux différenciateurs
- Full-speed USB and high-performance 8051 execution are integrated in one controller (vs C8051F321-GQ)
- Integrated 10-bit ADC reduces separate conversion hardware (vs C8051F120-GQ)
- On-chip C2 debug supports production programming without external programming pins (vs C8051F121-GQ)
Notes de conception
Place the MCU's decoupling capacitors directly beside their corresponding supply pins, and route USB D+ and D- as a short, tightly coupled pair. The C8051F32x family integrates C2 debug through two dedicated signals, so preserve access to those pins in the production test fixture. Before layout release, obtain the official package drawing and land pattern from the manufacturer datasheet rather than inferring dimensions from the 7x7 mm package description.
Treat analog and USB routing as separate layout concerns. Connect ADC inputs to short, guarded traces, keep switching or digital return currents away from the reference and sensor nodes, and place filtering close to the pins. The ADC reference may be external, internal, or VDD; whichever source is selected should be characterized for noise and startup behavior. Do not assume the 10-bit, 200 ksps conversion specification guarantees accuracy without checking the analog front end and acquisition timing.
The operating-voltage range, active current, and sleep current were not included in the supplied verified excerpts, so power-supply sizing cannot be finalized from this page alone. Use the electrical characteristics in the official Silicon Labs datasheet to set the regulator tolerances, bulk capacitance, and USB bus-powered operating budget. For USB-connected devices, include the host-supply tolerance and inrush behavior when selecting the local regulator and input protection network.
Informations de conformité
The supplied web excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for C8051F320. AEC-Q100 is marked not applicable because the verified sources describe an industrial/commercial microcontroller without automotive qualification.
