CD4018BPW - 5-Bit Presettable Counter | Texas Instruments
Référence : CD4018BPW ✓ ActifCD4018BPW Présentation
A CMOS presettable counter is a sequential digital logic device that counts clock transitions and can be loaded with an initial count through its parallel data inputs. A divide-by-N counter extends that function by arranging the counter stages to produce an output frequency related to the input clock frequency by a programmable division ratio. Within the digital IC hierarchy, the CD4018BPW belongs to the CMOS logic family and provides a compact implementation of counting, frequency division, timing, and programmable sequencing functions.
The principal device characteristics include one 5-bit counter element, positive-edge triggering, a 3 V minimum operating supply, an 18 V maximum operating supply, and an operating temperature range of -55°C to 125°C. Its 16-TSSOP package measures approximately 4.40 mm in body width. The PW catalog variant is identified as a tube-packaged 16-TSSOP device, making it practical for prototype assembly and conventional manufacturing processes that support tube feeding.
The counter architecture provides separate clock, reset, load, and data-control functions associated with the CD4018B family. These controls allow an external circuit to establish a starting value and then continue counting from that value. Because the device operates in the CMOS 4000 series, it is suited to conventional low-power digital designs where compatibility with existing 3 V to 18 V CMOS logic levels is important.
Typical uses include programmable frequency dividers, clock-generation and timing circuits, event counters, periodic pulse generators, digital test equipment, and industrial control logic. In a frequency-divider circuit, the counter receives a periodic clock and generates a lower-frequency output according to its programmed divide-by-N configuration. The positive-edge trigger gives the circuit a defined sampling behavior for the incoming clock waveform.
Designers should preserve the voltage-level compatibility of every connected 4000-series device and account for propagation delay when chaining counters. Reset and load signals must meet the specified input timing requirements, and unused inputs should be tied to defined logic levels. The 16-TSSOP footprint requires a PCB land pattern designed for a 0.173-inch, 4.40 mm-wide package rather than a wider SOIC body.
This product page combines the manufacturer family information with distributor package details, practical application guidance, and an explicit assessment of drop-in replacement availability. The CD4018BPW is most appropriate when a programmable CMOS divide-by-N counter, broad supply-voltage range, positive-edge counting, and a compact 16-TSSOP footprint are required.
Alternatives de remplacement direct pour CD4018BPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesCD4018BPW Valeurs maximales et caractéristiques électriques
| Product Type | CMOS presettable divide-by-N counter IC |
| Logic Family | CD4000 CMOS series |
| Counter Elements | 1 element |
| Counter Width | 5 bits |
| Edge Triggering | Positive edge |
| Minimum Operating Supply Voltage | 3 V |
| Maximum Operating Supply Voltage | 18 V |
| Typical Operating Supply Voltage | 3.3 V, 5 V, 9 V, 12 V, or 15 V |
| Minimum Operating Temperature | -55°C |
| Maximum Operating Temperature | 125°C |
| Boîtier | 16-TSSOP |
| Package Body Width | 4.40 mm (0.173 inch) |
| Lead Count | 16 leads |
| Type de montage | Surface mount |
| Packaging | Tube |
Guide de configuration des broches du CD4018BPW 4.40 mm (0.173 inch)
Configuration des broches du CD4018BPW (boîtier 4.40 mm (0.173 inch)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour CD4018BPW.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
CD4018BPW convient pour 6 applications: Programmable Frequency Divider, Digital Event Counter, Clock and Pulse Generation, Digital Timing Sequencer, CMOS Test and Measurement Logic, Periodic Control and Relay Sequencing.
Programmable Frequency Divider
The CD4018BPW is well suited to programmable frequency division because it combines a 5-bit presettable counter element with positive-edge operation and a broad 3 V to 18 V supply range. Place the counter clock at the desired input frequency and use the family control inputs to establish the operating count state. The resulting output can provide a lower periodic signal for timing or sequencing. During design, verify the exact mode configuration, output transition behavior, and propagation delay against the manufacturer CD4018B datasheet, especially when cascading multiple stages.
Digital Event Counter
The CD4018BPW can count recurring digital events in industrial control, test, and instrumentation systems. Its one 5-bit counter element accepts clock transitions on the positive edge, allowing pulses from sensors or control logic to advance the count in a defined manner. The 3 V to 18 V operating range supports conventional CMOS signal environments. Designers should allow adequate settling time around reset and load events and confirm that the maximum counted sequence meets the measurement requirement.
Clock and Pulse Generation
A CD4018BPW-based clock divider can reduce a periodic input into a lower-rate signal used for repetitive control updates, timing windows, or delayed events. The five-bit counter structure provides the core counting function, while positive-edge triggering defines when the input clock is sampled. The device operates from 3 V through 18 V, which allows it to share supplies with compatible 4000-series logic. Confirm reset recovery, clock pulse-width limits, and propagation delay in the CD4018B datasheet before setting timing margins.
Digital Timing Sequencer
The CD4018BPW can act as the counting element in a programmable timing sequencer that advances through defined states after each clock transition. Preset control allows an external circuit to initialize the counter before operation, supporting repeatable timing sequences in control and test equipment. Its 16-TSSOP package helps reduce board area compared with larger through-hole or SOIC-style logic packages. The design must respect input setup and hold timing for load and reset signals and must account for propagation delay when sequencing multiple outputs.
CMOS Test and Measurement Logic
The CD4018BPW is appropriate for legacy-style CMOS test and measurement logic that requires a divide-by-N function rather than a general-purpose binary counter. Its 5-bit element, positive-edge operation, and 3 V to 18 V supply capability permit use in bench instruments and embedded measurement fixtures that already employ compatible 4000-series logic. Keep clock routing short and isolate analog or high-fan-out nets where possible. The exact package footprint and pin functions must be taken from the manufacturer datasheet before layout release.
Periodic Control and Relay Sequencing
The CD4018BPW can derive a slower periodic control event from a faster system clock in industrial and automation equipment. That divided event can support repetitive actuator updates, sampling intervals, or staged timing operations. Positive-edge counting and the ability to preset the counter make the device useful when each operating cycle begins from a defined state. Keep the counter supply compatible with adjacent logic, use defined levels on unused inputs, and verify reset behavior across power-up to prevent unintended count sequences.
Données de référence d'ingénierie pour CD4018BPW — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Texas Instruments |
| Package | 16-TSSOP |
| Product Type | CMOS presettable divide-by-N counter |
| Counter Elements | 1 element |
| Counter Width | 5 bits |
| Triggering | Positive edge |
| Operating Supply Voltage | 3 V to 18 V |
| Operating Temperature | -55°C to 125°C |
| Package Body Width | 4.40 mm (0.173 inch) |
| Lead Count | 16 leads |
Principaux différenciateurs
- Broad operating supply range (vs CD40161BPWR)
- Purpose-built divide-by-N architecture (vs CD4026BPWR)
- Positive-edge counting (vs CD4018BPWE4)
Notes de conception
Design the PCB land pattern for the 16-TSSOP PW package, identified as approximately 4.40 mm wide. Confirm body width, lead span, pitch, and exposed-pad status directly from the current manufacturer package drawing before releasing copper artwork. A footprint intended for the wider SOIC body will not provide acceptable lead alignment, even though both packages use 16 pins.
Route the clock as a short, continuous trace away from switching-node and high-current return paths. Because the CD4018BPW is positive-edge triggered, ringing or a slow clock edge can alter the point at which the counter advances. Use the manufacturer clock timing limits to establish rise-time and pulse-width margins, and avoid adding unnecessary stubs or test-point discontinuities to the clock net.
Do not assume that every 4000-series counter is a drop-in substitute. Counter width, reset and load polarity, clock edge, output count sequence, and pin placement must all match. Verify that unused inputs remain at defined logic levels and that reset is released with valid timing after power-up. Mixed-family substitutions can appear to count correctly but produce a different terminal count or output sequence.
Informations de conformité
Compliance attributes were not stated in the manufacturer family information or distributor listings. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer for the exact ordering code before production release.