CS4222-DSZ - 20-Bit Stereo Codec | Cirrus Logic | 4-Channel
Référence : CS4222-DSZ ✓ ActifCS4222-DSZ Présentation
An audio codec is a mixed-signal interface IC that converts audio between analog and digital representations. In the signal hierarchy, a codec combines an ADC, DAC, volume control, and associated interface functions into one device. The CS4222-DSZ belongs to the audio codec category within interface ICs, providing a compact bridge between analog audio circuitry and a digital audio system.
The CS4222-DSZ provides 20-bit stereo conversion, two analog input channels, two analog output channels, and integrated volume control. It operates from a single +5 V supply, which can simplify analog power planning in equipment that does not use a negative analog rail. Delta-sigma conversion supports digital filtering of quantization noise, helping place the codec between source circuitry and downstream audio processing.
As a four-channel part, the CS4222-DSZ can support a stereo playback and recording architecture. The integrated volume-control function can reduce the number of separate analog gain stages required in basic audio paths. Its interface and control details should be checked in the manufacturer datasheet before fixing clock, format, register, and digital-interface settings on the PCB.
Typical uses include professional and consumer audio interfaces, multimedia equipment, sound cards, digital mixing equipment, and embedded audio systems. The single +5 V architecture is particularly useful where analog circuitry already operates around that rail. Systems requiring a different power plan may prefer another codec with matching supply and interface requirements.
PCB design should preserve short, controlled analog paths and provide the decoupling and layout shown in the manufacturer datasheet. Keep analog input and output routing away from high-speed digital signals, use a continuous ground reference plane, and place bypass capacitors close to their supply pins. Confirm pin assignments and exposed connections before routing because the public product listing does not reproduce the complete pin-description table.
This page organizes the verified product identity, package, converter architecture, sourcing data, engineering guidance, and confirmed cross-reference candidate for engineers evaluating the CS4222-DSZ. A qualified replacement should be checked against pinout, supply voltage, audio format, clocking, control registers, performance, and lifecycle requirements before PCB release.
Alternatives de remplacement direct pour CS4222-DSZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
CS4223-DSZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CS4222-DSZ Valeurs maximales et caractéristiques électriques
| Product Type | Stereo audio codec IC |
| Converter Resolution | 20 bit |
| ADC Configuration | Stereo analog-to-digital converter |
| DAC Configuration | Stereo digital-to-analog converter |
| Channel Count | 4 channels |
| Conversion Method | Delta-sigma conversion |
| Tension d'alimentation | +5 V |
| Power Supply Configuration | Single supply |
| Volume Control | Integrated audio volume control |
| Package Type | 28-pin SSOP |
| Type de montage | Surface mount |
Guide de configuration des broches du CS4222-DSZ 28-pin ssop
Configuration des broches du CS4222-DSZ (boîtier 28-pin ssop). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour CS4222-DSZ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
CS4222-DSZ convient pour 6 applications: Stereo Audio Recording Interface, Stereo Playback and Monitoring, Professional Audio Interface, Digital Mixing and Signal Processing, Multimedia Sound Card, Communications Equipment Audio Monitor.
Stereo Audio Recording Interface
The CS4222-DSZ fits a compact stereo capture path because it combines two analog input channels with 20-bit delta-sigma ADC conversion in one 28-pin SSOP package. The device can sit between line-level audio sources and a digital signal processor or host codec, reducing the number of separate converter packages. Its single +5 V supply is useful when the surrounding analog system already operates from that rail. Before layout release, confirm input impedance, full-scale range, sampling rate, clock source, digital audio format, and anti-alias filter requirements against the manufacturer datasheet.
Recommandé
Stereo Playback and Monitoring
For stereo playback and monitoring, the CS4222-DSZ provides stereo DAC conversion, two analog output channels, and integrated volume control within a single package. This arrangement can simplify a playback chain by reducing the need for a separate basic level-control circuit. The 20-bit conversion architecture is appropriate for equipment accepting digital audio from a host processor and producing analog line-level outputs. Confirm output load capability, sample-rate support, digital timing, de-emphasis requirements, and analog-output filtering with the manufacturer datasheet before finalizing the schematic.
Recommandé
Professional Audio Interface
The CS4222-DSZ can support a two-input, two-output professional audio interface when the required bandwidth, noise, distortion, and clocking performance fit the system. Its four-channel organization accommodates simultaneous stereo capture and playback, while integrated volume control supports local level management. The single +5 V supply may simplify power distribution compared with dual-rail analog designs. Engineers should verify input and output ranges, full-scale behavior, codec delay, master-clock architecture, and whether professional equipment requires digital AES/EBU rather than another supported interface.
Recommandé
Digital Mixing and Signal Processing
The CS4222-DSZ is suitable for a digital mixing front end that requires analog stereo inputs and analog stereo outputs around a digital processor. The ADC path captures analog sources as 20-bit digital audio, the host performs mixing or processing, and the DAC path returns the processed result to analog circuitry. Integrated volume control can provide a basic level adjustment near the converter. Validate channel routing, register control, latency, clock-domain relationships, and scaling through software and hardware testing because those operating details must be confirmed from the device documentation.
Recommandé
Multimedia Sound Card
The CS4222-DSZ can serve as the analog and digital conversion section of a multimedia sound card supporting stereo playback and capture. Its single +5 V operation, four-channel arrangement, 20-bit conversion resolution, and integrated volume control fit a space-conscious consumer or semi-professional interface. The host processor must support the codec's required digital audio format and clocking method. Before production, verify operating-system driver expectations, input impedance, headphone or line-output drive requirements, electromagnetic-emissions margins, and the complete package pin assignment.
Recommandé
Communications Equipment Audio Monitor
In communications equipment with local audio monitoring, the CS4222-DSZ can provide a stereo digital-to-analog monitoring path while also supporting stereo capture where required. Its four-channel arrangement allows shared capture and playback through one codec, and the single +5 V rail can align with many embedded analog systems. The codec is not a wireless transceiver, so it cannot implement radio communication by itself. Confirm electromagnetic-interference margins, audio-clock source, codec latency, line-output drive, and system grounding before integrating it beside high-speed communication circuitry.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour CS4222-DSZ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | CS4223-DSZ |
|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP |
| Brand | Cirrus Logic | Cirrus Logic |
| Product Type | Stereo audio codec | Audio codec |
Principaux différenciateurs
- Integrated four-channel stereo conversion in one package (vs CS4223-DSZ)
- Single +5 V analog power architecture (vs CS4223-DSZ)
- Integrated volume control with delta-sigma conversion (vs CS4223-DSZ)
Notes de conception
Use the manufacturer package drawing and recommended-layout section when assigning the 28-pin SSOP footprint. Keep analog input and output traces short, maintain a continuous ground reference, and avoid routing sensitive analog nets beneath or immediately beside high-speed digital clock lines. Place local bypass capacitors close to the relevant supply pins with short ground returns. Verify the exposed pad, if any, against the mechanical drawing rather than assuming its location from a generic SSOP footprint.
Treat the digital audio interface and master-clock lines as coupled timing signals even when their data rate is moderate. Route clocks away from analog inputs and outputs, use a continuous reference plane, and follow the recommended termination and impedance arrangement in the manufacturer datasheet. Confirm source and destination timing margins under worst-case conditions. Incorrect clock routing or an unsuitable digital format can produce intermittent audio corruption even when all static specifications appear acceptable.
Do not treat a family cross-reference as a drop-in approval without checking the pin-description table, electrical limits, sampling-rate support, clock architecture, digital interface, and control registers. CS4223-DSZ is a same-family candidate, but its suitability for an existing CS4222-DSZ board cannot be concluded from the model name alone. Prototype the substitute, replay representative audio formats, verify register access and reset behavior, and compare output level, noise, distortion, and clock margin before production release.
Isolate the codec's analog input and output paths from switching supplies, processor interfaces, and high-speed communications circuitry. Use a compact analog ground strategy that follows the manufacturer's guidance, place analog filtering close to the codec, and keep switching-regulator loops away from sensitive audio nodes. Evaluate radiated and conducted emissions at the product level because a working codec board can still fail system EMC requirements when its analog and digital subsystems share poorly controlled return paths.
Informations de conformité
The available product records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Automotive qualification must not be inferred from the CS4222-DSZ ordering code.