Cirrus Logic Inc.

CS4353-CZZ - 24-Bit Stereo DAC with 2Vrms Output | Cirrus Logic

Référence : CS4353-CZZ ✗ Fin de vie
0.85 V to 3.47 V Vdss 24-QFN with exposed pad, 4 mm x 4 mm Package
MOQ : 1 |

CS4353-CZZ Présentation

Cirrus Logic CS4353-CZZ is a 24-bit stereo digital-to-analog converter with a 192 kHz sample rate, I2S audio input, integrated 2 Vrms line-level drivers, and a 3.3 V supply requirement. The device is packaged in a 24-QFN surface-mount package measuring 4 mm by 4 mm and includes an exposed thermal pad. It is designed for compact consumer, communications, and industrial audio systems requiring a complete stereo DAC signal chain in one package.

An audio digital-to-analog converter, or audio DAC, converts digital PCM or I2S audio samples into analog voltage signals. The CS4353 integrates digital interpolation, a fifth-order multi-bit delta-sigma DAC, digital de-emphasis, analog filtering, and a 2 Vrms line-level output driver. Within the broader semiconductor hierarchy, it is an audio data-conversion IC, a member of the ADC/DAC category, and a digital-to-analog converter within the audio signal-chain family.

The principal features include 24-bit resolution, operation up to 192 kHz, stereo I2S input, a 3.3 V supply, and integrated 2 Vrms line-level outputs. The fifth-order multi-bit delta-sigma architecture performs digital interpolation and conversion before the reconstructed signal passes through the analog filter and output driver. Integrating these stages reduces the number of external signal-chain components required for line-level audio output.

The component is identified as a special-purpose audio DAC rather than a general-purpose ADC or DAC. Its stated operating supply range is 0.85 V to 3.47 V, while the digital audio path supports 24-bit words at rates as high as 192 kHz. The on-chip 2 Vrms line driver is intended to simplify connections to downstream analog stages, although board-level loading, coupling, and gain requirements still determine the final output network.

Typical uses include digital audio players, multimedia appliances, communications equipment, sound-card and USB-audio subsystems, stereo line-level signal sources, and embedded audio platforms. The compact 24-QFN package is particularly useful where board area is constrained, while the exposed pad provides a thermal connection to the PCB copper area. The CS4353-CZZ is offered in the commercial temperature range of -40°C to +85°C.

When laying out this device, use the exposed-pad and thermal-land geometry specified by the manufacturer, place decoupling capacitors close to their associated supply pins, and route digital audio and analog output signals away from switching nodes and high-current return paths. Confirm the selected I2S format, master or slave role, sample-rate support, and output loading against the circuit before releasing the layout.

This page combines the CS4353-CZZ electrical identity, package information, documented stereo-DAC feature set, verified drop-in family options, application guidance, and practical layout considerations. It also distinguishes exact-match procurement details from engineering decisions that must be confirmed against the complete manufacturer datasheet and the selected system interface.

Alternatives de remplacement direct pour CS4353-CZZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

CS4353-CZZR

✅ Remplacement direct
📦 24-QFN (4x4) with exposed pad
Same 24-bit, 192 kHz stereo DAC electrical function and 24-QFN footprint; packaging format changes from tube-oriented CS4353-CZZ to reel-oriented CS4353-CZZR (0% functional change).

📋 Alternative de référence (hors catalogue)

CS4353-CZZ Valeurs maximales et caractéristiques électriques

Device Type Stereo audio digital-to-analog converter
Converter Architecture Fifth-order multi-bit delta-sigma DAC
Résolution 24 bit
Maximum Sample Rate 192 kHz
Digital Audio Interface I2S
Number of Channels 2 channels
Supply Voltage Range 0.85 V to 3.47 V
Nominal Supply Voltage 3.3 V
Integrated Output 2 Vrms line-level driver per channel
Digital Interpolation Integrated
Digital De-emphasis Integrated
Analog Filtering Integrated
Boîtier 24-QFN with exposed pad, 4 mm x 4 mm
Type de montage Surface mount
Plage de température de fonctionnement -40°C to +85°C
Product Category ADCs/DACs - Special Purpose
Evaluation Support CDB4353 customer demonstration board

Guide de configuration des broches du CS4353-CZZ 24-qfn with exposed pad, 4 mm x 4 mm

Configuration des broches du CS4353-CZZ (boîtier 24-qfn with exposed pad, 4 mm x 4 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 24-qfn with exposed pad, 4 mm x 4 mm pour le CS4353-CZZ

Aucune donnée de brochage détaillée disponible pour CS4353-CZZ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

CS4353-CZZ convient pour 6 applications: Digital Audio Player, USB and Multimedia Audio, Communications Audio Terminal, Stereo Line-Level Signal Source, Sound Card Audio Output, Industrial Audio Interface.

🎧

Digital Audio Player

The CS4353-CZZ fits a digital audio player that receives 24-bit I2S samples and needs a compact stereo line-level output. Its fifth-order multi-bit delta-sigma DAC supports operation up to 192 kHz, while the integrated digital interpolation, de-emphasis, analog filter, and 2 Vrms line driver consolidate most of the playback signal chain. This can reduce board area and keep analog output circuitry close to the source interface. The designer must still implement the required I2S clocking, bypass capacitors, output coupling or termination, and the manufacturer-defined exposed-pad land pattern.

📱

USB and Multimedia Audio

The CS4353-CZZ is suitable for USB-audio and multimedia appliances that convert a digital stereo stream into analog line-level signals. Its 24-bit I2S interface handles high-resolution audio up to 192 kHz, and the integrated 2 Vrms drivers remove the need for a separate baseline analog output amplifier. Place the DAC in the quiet analog section of the layout, use short digital traces from the audio controller, and keep switching regulators and high-speed digital return paths away from the line outputs. Stable references and clean supplies are essential for low distortion.

🌐

Communications Audio Terminal

A communications terminal can use the CS4353-CZZ to generate a full-power stereo line-level output from an I2S audio source. The converter supports 24-bit data at rates up to 192 kHz and includes filtering plus 2 Vrms line drivers in one compact 24-QFN package. This is useful when the equipment must accept high-resolution digital audio while exposing an analog line interface. The commercial -40°C to +85°C rating suits equipment with controlled indoor or industrial environments, and the exposed pad should be tied to thermal copper according to the manufacturer layout guidance.

🔧

Stereo Line-Level Signal Source

The CS4353-CZZ is appropriate for a dedicated stereo line-level source that accepts digital audio and outputs analog signals for downstream amplification. Its integrated 2 Vrms drivers provide a useful output baseline without requiring discrete line amplifiers, while digital de-emphasis and analog reconstruction filtering are handled on-chip. This integration makes the converter particularly suitable for compact source equipment with a 3.3 V architecture. Validate output loading and coupling externally, keep return currents out of the analog output path, and use the exposed-pad footprint for predictable thermal performance.

🖥️

Sound Card Audio Output

The CS4353-CZZ can provide the stereo analog output stage for a sound card or professional digital audio interface operating from a 3.3 V rail. The 24-bit conversion resolution and 192 kHz maximum rate support high-resolution playback paths, while the integrated 2 Vrms line-level driver simplifies the connection to an external output stage. Its 4 mm by 4 mm 24-QFN footprint preserves board area in compact cards. For professional implementations, check clock jitter, system-level noise and distortion, output loading, grounding, and whether the chosen legacy device remains suitable for the intended production cycle.

🏭

Industrial Audio Interface

The CS4353-CZZ suits industrial audio interfaces that need a deterministic stereo I2S-to-analog conversion function in a compact package. Its -40°C to +85°C commercial operating range, 3.3 V supply operation, 24-bit conversion, and integrated line drivers support compact embedded audio subsystems. The device should be mounted according to the 24-QFN exposed-pad drawing, with adequate copper and vias for thermal conduction. In a mixed-signal industrial board, partition switching converters and digital processors from the analog outputs, and verify grounding and isolation strategy for the connected external audio cables.

Récapitulatif des produits recommandés

CS4353-CZZR Reel-oriented orderable form of the same CS4353 converter Utilisé dans : Digital Audio Player, USB and Multimedia Audio, Communications Audio Terminal, Stereo Line-Level Signal Source, Sound Card Audio Output, Industrial Audio Interface
What is the CS4353-CZZ?
The CS4353-CZZ is a Cirrus Logic 24-bit stereo audio digital-to-analog converter operating up to 192 kHz with an I2S interface and integrated 2 Vrms line-level drivers. According to the manufacturer datasheet, it combines digital interpolation, a fifth-order multi-bit delta-sigma DAC, digital de-emphasis, analog filtering, and output amplification from a 3.3 V supply. It is housed in a 24-QFN package with an exposed pad.
What are the key specifications of CS4353-CZZ that engineers should know?
The CS4353-CZZ provides 24-bit resolution, a maximum 192 kHz sample rate, stereo I2S input, a 0.85 V to 3.47 V supply range, and integrated 2 Vrms line-level outputs. The manufacturer datasheet identifies a fifth-order multi-bit delta-sigma conversion architecture and a 24-QFN package with an exposed pad. These features make the device a complete stereo audio DAC signal chain rather than a converter requiring a separate line-output stage.
Where can I download the CS4353-CZZ datasheet PDF?
The CS4353-CZZ manufacturer datasheet can be downloaded from the Cirrus Logic PDF hosted at https://www.mouser.com/catalog/specsheets/cs4353_f3.pdf. It documents the 3.3 V stereo DAC, 24-bit resolution, 192 kHz operation, fifth-order multi-bit delta-sigma architecture, 24-QFN package, and -40°C to +85°C commercial temperature range. Use its pin-description and application sections when assigning PCB nets.
Where can I find the CS4353-CZZ pinout?
The CS4353-CZZ pin assignment is found in the pin-description table of the manufacturer datasheet at https://www.mouser.com/catalog/specsheets/cs4353_f3.pdf. The component uses a 24-pin QFN package with an exposed pad, so its footprint cannot be assigned correctly from the package name alone. Use the manufacturer's land pattern and pin table during schematic capture and PCB layout, including the exposed thermal-pad connection.
What is the supply voltage range of the CS4353-CZZ?
The CS4353-CZZ operates over a 0.85 V to 3.47 V supply range and is described as a 3.3 V stereo DAC. According to the manufacturer datasheet, the integrated converter and 2 Vrms line-level driver operate from this supply family. Designers should separate analog and digital return paths, place local bypass capacitors at the relevant supply pins, and verify every connected IC uses compatible logic levels.
Can the CS4353-CZZ drive stereo line-level outputs directly?
Yes, the CS4353-CZZ includes an on-chip 2 Vrms line-level driver for stereo output. The manufacturer datasheet identifies digital interpolation, fifth-order multi-bit delta-sigma conversion, digital de-emphasis, analog filtering, and the line driver as integrated functions. This integration can reduce analog output-stage complexity, although downstream coupling, gain, loading, and ground requirements must still match the target audio architecture.
Is the CS4353-CZZ suitable for 192 kHz audio?
The CS4353-CZZ supports sample rates up to 192 kHz with 24-bit resolution. Its documented digital interface is I2S, and the converter includes interpolation and a fifth-order multi-bit delta-sigma stage. Confirm the required I2S master or slave role, bit-clock relationship, and supported operating mode in the manufacturer datasheet before connecting a source device, particularly in high-resolution player designs.
Is CS4353-CZZ suitable for consumer and industrial audio equipment?
The CS4353-CZZ is suitable for compact stereo audio systems operating across the -40°C to +85°C commercial temperature range. Its 24-bit, 192 kHz I2S interface and integrated 2 Vrms line-level outputs suit digital players, multimedia equipment, communications terminals, sound-card outputs, and other systems requiring a compact stereo DAC. The application must also satisfy the exposed-pad land pattern and analog-layout recommendations.
What can replace the obsolete CS4353-CZZ?
CS4353-CZZR is the closest documented drop-in family option because it retains the same CS4353 device identity, 24-bit stereo DAC function, 192 kHz capability, and 24-QFN package while changing the orderable packaging format. Confirm the manufacturer ordering information, pin compatibility, and assembly handling requirements before using it as a production substitute. The Request a Quote form on this page should be used to confirm availability and procurement conditions.
Can CS4353-CZZR replace CS4353-CZZ without changing the PCB?
CS4353-CZZR is the closest available drop-in option for CS4353-CZZ because it is another orderable form of the same CS4353 family and uses the same 24-QFN package. The primary difference is the orderable packaging format rather than a change to the converter function. Verify the exact tape-and-reel or tube handling requirement and compare the manufacturer ordering information before substituting it in assembly.
What is the difference between CS4353-CZZ and CS4353-CZZR?
The CS4353-CZZ and CS4353-CZZR are orderable forms of the same 24-bit, 192 kHz stereo I2S DAC with integrated 2 Vrms line drivers and a 24-QFN package. The documented distinction is the packaging format: CS4353-CZZ is associated with tube packaging, while CS4353-CZZR is the reel-oriented orderable variant. Because the electrical function and footprint match, the latter is the relevant drop-in choice when its packing method suits the assembly process.
When should I choose CS4353-CZZ over another stereo DAC?
Choose CS4353-CZZ when a legacy design specifically calls for the 24-bit, 192 kHz CS4353 function with an integrated 2 Vrms line driver and the 24-QFN exposed-pad footprint. Its strongest advantage is reuse of an established Cirrus Logic signal chain without adding a separate analog output stage. For a new design, compare lifecycle availability, interface requirements, output swing, thermal layout, and assembly packaging before committing the design.
Is CS4353-CZZ the same as CS4353-CNZ?
CS4353-CNZ belongs to the same CS4353 stereo-DAC family and appears in the family comparison, but it should not be treated as an automatic substitute without checking its exact package, pinout, ordering code, and electrical ratings. The closest documented same-footprint choice is CS4353-CZZR. Confirm both the physical package and manufacturer ordering information in the datasheet before approving either part for a drop-in replacement.
Where can I buy CS4353-CZZ and check its lead time?
Use the Request a Quote form on this page to request CS4353-CZZ availability, current lead time, minimum order quantity, and package format. The manufacturer lists the commercial-grade device in a 24-QFN exposed-pad package, while ordering information distinguishes the CS4353-CZZ tube presentation from the CS4353-CZZR reel presentation. Confirm the obsolete-product status and the proposed procurement source before scheduling production.
How should the CS4353-CZZ exposed pad be handled on a PCB?
The CS4353-CZZ exposed pad must be connected according to the manufacturer's 24-QFN land pattern and thermal design guidance. Provide the required via array and copper area beneath the device so heat can leave the package without disturbing sensitive analog routing. The manufacturer's pin-description table and package drawing should control pad assignment, solder-mask policy, paste aperture, and via construction.

Données de référence d'ingénierie pour CS4353-CZZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the CS4353-CZZ when maintaining an existing design that specifically requires the tube-packaged commercial-grade Cirrus Logic stereo DAC, a 24-QFN exposed-pad footprint, 24-bit conversion, and operation up to 192 kHz. Select CS4353-CZZR when the electrical function and PCB layout must remain unchanged but reel packaging is required for assembly. The two parts provide the same core converter function, so the practical distinction is order format, lifecycle, and procurement rather than performance. No additional drop-in candidates are justified because the available family references do not establish five distinct same-footprint alternatives. For a new design, also evaluate current lifecycle availability and any newer stereo DAC needed to meet long-term production requirements.

Comparaison avec les alternatives

Paramètre Ce produit CS4353-CZZR
Package 24-QFN (4x4) with exposed pad 24-QFN (4x4) with exposed pad
Brand Cirrus Logic Cirrus Logic
Resolution 24 bit 24 bit
Maximum Sample Rate 192 kHz 192 kHz
Digital Interface I2S I2S
Supply Voltage Range 0.85 V to 3.47 V 0.85 V to 3.47 V
Integrated Output 2 Vrms line-level driver 2 Vrms line-level driver
Conversion Architecture Fifth-order multi-bit delta-sigma DAC Fifth-order multi-bit delta-sigma DAC
Operating Temperature Range -40°C to +85°C -40°C to +85°C

Principaux différenciateurs

  • Complete integrated stereo line-output signal chain (vs CS4353-CZZR)
  • Drop-in package reuse (vs CS4353-CZZR)
  • High-resolution audio in a compact package (vs CS4353-CZZR)

Notes de conception

Treat the exposed pad as both a thermal connection and a package feature that must follow the manufacturer land pattern. Provide the prescribed via array and a continuous copper area beneath the 24-QFN package, then verify that surrounding analog and digital routing does not interrupt thermal-current flow. Because exact resistance and pad details are not stated in the product listing, use the manufacturer package drawing rather than a generic 24-QFN footprint.

Partition the board so the I2S clock and data routes remain short and shielded from the analog line outputs. Place local bypass capacitors next to the associated supply pins and route their return current directly into the quiet ground plane. Keep switching-node copper, inductor areas, and high-current digital return paths away from the DAC outputs. The integrated 2 Vrms driver simplifies the analog chain, but it does not eliminate sensitivity to ground bounce and common-impedance coupling.

Do not treat a family suffix as interchangeable without checking the exact ordering information. CS4353-CZZ is identified with tube packaging, whereas CS4353-CZZR is the reel-oriented ordering option. The electrical DAC function and 24-QFN footprint match, but assembly handling, moisture controls, labeling, and procurement availability still require review. Verify the pin-description table, exposed-pad connection, supply sequencing, and I2S clocking configuration before releasing a replacement order.

Confirm the digital interface operating mode and clock relationships directly from the manufacturer datasheet. The converter accepts I2S audio and supports rates up to 192 kHz, but a nominally compatible source controller is not sufficient if master-versus-slave operation, data alignment, or bit-clock requirements differ. Route clock and data as a controlled group, provide return-path continuity, and avoid introducing unnecessary stubs or level-shifting stages between the source and the DAC.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The product listing identifies the CS4353-CZZ as a commercial-grade audio DAC in a -40°C to +85°C range, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were provided. The exposed-pad package and environmental requirements are not substitutes for formal compliance declarations.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

CS4353-CZZ datasheet CS4353-CZZ pinout CS4353-CZZ datasheet pdf Cirrus Logic CS4353-CZZ CS4353 24 bit 192kHz DAC CS4353-CZZ 24-QFN package CS4353-CZZ I2S interface CS4353-CZZ 2Vrms line driver CS4353-CZZ drop-in replacement CS4353-CZZ vs CS4353-CZZR CS4353-CZZ price CS4353-CZZ stock CS4353-CZZ obsolete replacement CS4353-CZZ application circuit CS4353 stereo DAC schematic

Composants & termes associés

Cirrus Logic CS4353-CZZ CS4353-CZZR stereo audio DAC digital-to-analog converter audio data-conversion IC delta-sigma DAC multi-bit converter I2S PCM audio 24-bit resolution 192 kHz sample rate 2 Vrms line output digital interpolation digital de-emphasis analog reconstruction filter 3.3 V supply 24-QFN exposed pad surface-mount package USB audio digital audio player industrial audio interface RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ