CS5368-DQZ 8-Channel 24-Bit 192kHz Audio ADC | Cirrus Logic
Référence : CS5368-DQZ ✗ Fin de vieCS5368-DQZ Présentation
An audio ADC is a data-converter IC that converts eight simultaneous analog audio inputs into digital sample values. The CS5368 belongs to the ADC > audio converter > data converter > signal-processing IC hierarchy. Its eight-channel architecture replaces several discrete converter channels, simplifying routing in receivers, mixing consoles, recorders, and automotive audio systems while preserving a compact board footprint.
The converter provides 24-bit resolution, a maximum sampling rate of 192 kHz, and 114 dB dynamic range according to the manufacturer product listing and data sheet. An operating supply range of 4.75 V to 5.25 V supports conventional 5 V audio-system rails. Its digital TDM interface supports efficient transmission of multiple audio channels, while the 48-LQFP package provides a documented, widely supported surface-mount footprint.
The CS5368 integrates eight audio input channels with the conversion engine and digital interface into one package. This architecture reduces the number of external converters and associated routing components in multichannel equipment. Manufacturer literature identifies transparent conversion, wide dynamic range, and negligible distortion as central benefits for high-end and professional audio applications.
Typical uses include A/V receivers, digital mixing consoles, multichannel recorders, outboard converters, digital effects processors, and automotive audio systems. These systems benefit from simultaneous conversion of multiple channels and the reduced board area required by an integrated eight-channel ADC. The 192 kHz capability also supports high-resolution recording and playback workflows.
PCB design should prioritize short, symmetrical analog input paths and a clean digital return because the device combines low-level analog inputs with a high-speed digital interface. Follow the manufacturer pin-description table and reference schematic for component placement, decoupling, and exposed-pad implementation. Confirm interface mode, clocking, and channel mapping in firmware before production release.
This page combines the documented converter specifications with application guidance, selection criteria, lifecycle information, and engineering-oriented comparison points. It is intended to help designers evaluate the CS5368-DQZ for multichannel audio systems while checking the manufacturer data sheet for final clock, layout, and interface details.
Alternatives de remplacement direct pour CS5368-DQZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
CS5368-CQZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CS5368-CQZR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CS5368-DQZR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CS5364-CQZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CS5366-CQZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CS5368-DQZ Valeurs maximales et caractéristiques électriques
| Converter Type | 8-channel audio analog-to-digital converter |
| Résolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Dynamic Range | 114 dB |
| Number of Input Channels | 8 channels |
| Digital Audio Interface | TDM interface |
| Tension d'alimentation de fonctionnement | 4.75 V to 5.25 V |
| Plage de température de fonctionnement | -40 C to +105 C |
| Boîtier | 48-LQFP, 7 x 7 mm |
| Nombre de broches | 48 pins |
| Type de montage | Surface mount |
| Statut RoHS | Compliant |
| Product Lifecycle | Discontinued |
Guide de configuration des broches du CS5368-DQZ 48-lqfp, 7 x 7 mm
Configuration des broches du CS5368-DQZ (boîtier 48-lqfp, 7 x 7 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour CS5368-DQZ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
CS5368-DQZ convient pour 6 applications: A/V Receiver Multichannel Audio Conversion, Digital Mixing Console, Multichannel Studio Recorder, Outboard Audio Converter, Digital Effects Processor, Automotive Audio System.
A/V Receiver Multichannel Audio Conversion
The CS5368-DQZ fits an A/V receiver that must convert multiple incoming audio channels into a digital stream for surround-sound processing. Eight integrated 24-bit channels reduce the number of separate converter packages, while the 192 kHz maximum sampling rate supports high-resolution source material. Its TDM interface provides a practical route for carrying multiple channels to the receiver's digital audio processor. The main design consideration is clock and channel-slot mapping, which must be configured to match the selected digital audio mode.
Recommandé
Digital Mixing Console
A digital mixing console can use the CS5368-DQZ to capture eight analog input channels through one 48-LQFP device. The 24-bit resolution and 114 dB dynamic range suit high-resolution professional audio paths, while the TDM interface can reduce the number of interconnects to the console's digital processing engine. Place the converter near the input board to keep analog routing short, and verify master-clock ratios, TDM slot allocation, and grounding against the manufacturer reference circuit.
Recommandé
Multichannel Studio Recorder
The CS5368-DQZ is appropriate for a multichannel recorder requiring simultaneous conversion of eight professional audio inputs. Its 192 kHz maximum rate permits high-resolution recording modes, and the 114 dB dynamic range supports a transparent conversion path. The integrated converter reduces board area compared with multiple single-channel devices, although the engineer must select compatible input-network values and route the TDM output according to the recorder's clock architecture.
Recommandé
Outboard Audio Converter
An outboard converter benefits from the CS5368-DQZ because it consolidates eight analog inputs into a single 48-LQFP converter with 24-bit resolution and up to 192 kHz sampling. This allows a compact peripheral to feed a host processor through a TDM digital interface while preserving a consistent multichannel conversion architecture. The enclosure and grounding design should minimize analog-input pickup of digital switching noise, and the converter's 4.75 V to 5.25 V supply range requires a suitable regulated rail.
Recommandé
Digital Effects Processor
The CS5368-DQZ can serve as the front-end converter in a digital effects processor handling eight synchronized audio inputs. The 192 kHz maximum sampling rate supports oversampling-oriented processing architectures, and the TDM interface provides a consolidated digital connection to the processing engine. Its integration helps reduce board area in rack and desktop products. Critical implementation work includes defining the TDM frame, synchronizing the master clock, and isolating analog input traces from the digital bus.
Recommandé
Automotive Audio System
The CS5368-DQZ suits multichannel automotive audio systems where several microphone, radio, or auxiliary inputs must be converted before processing. Its -40 C to +105 C operating-temperature range and 8-channel 24-bit conversion support a compact, high-performance audio front end. The TDM output can connect to an automotive audio processor efficiently. Production implementation should include careful EMI control, robust grounding, and verification of the exact ordering-code temperature grade because the converter family is discontinued.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour CS5368-DQZ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | CS5368-CQZ | CS5368-CQZR | CS5368-DQZR | CS5364-CQZ | CS5366-CQZ |
|---|---|---|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP | 48-LQFP |
| Converter Type | 8-channel audio ADC | 8-channel audio ADC | 8-channel audio ADC | 8-channel audio ADC | 4-channel audio ADC | 6-channel audio ADC |
| Number of Input Channels | 8 channels | 8 channels | 8 channels | 8 channels | 4 channels | 6 channels |
Principaux différenciateurs
- Provides all eight required audio conversion channels in one package (vs CS5364-CQZ)
- Retains the complete eight-channel architecture at a smaller channel deficit than the four-channel family member (vs CS5366-CQZ)
- Combines high-resolution conversion with a consolidated multichannel digital link (vs CS5341-CZZR)
Notes de conception
Route the eight analog inputs as short, symmetric paths and place the CS5368-DQZ close to the input connectors or front-end network. Maintain a continuous ground reference beneath the analog section and separate high-speed clock and TDM routing from sensitive input traces. Follow the manufacturer application circuit for reference grounding, supply decoupling, and the 48-LQFP land pattern rather than relying on a generic package footprint.
Treat master-clock and TDM lines as high-speed digital signals even though the converter is an audio device. Use controlled-impedance routing where applicable, minimize stub lengths, provide solid ground references, and avoid running digital buses beneath analog input paths. Verify TDM slot alignment, channel mapping, and master-clock relationships against the manufacturer timing diagrams before enabling all eight channels.
Do not treat CS5368-CQZ, CS5368-CQZR, and CS5368-DQZR as automatically equivalent without checking the ordering table. The family shares the 48-LQFP format and core eight-channel converter function, but suffixes can distinguish reel packing or temperature-grade options. Since the CS5368 family is discontinued, also verify date code, inspection status, storage requirements, and supply longevity before approving a replacement.
Informations de conformité
RoHS compliance is identified by the CS5368-DQZ component listing. The CS5368 family is identified by the manufacturer as discontinued. REACH, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status are not established by the cited information.