CY8C20180-SX2I - CapSense Touch Controller | Infineon
Référence : CY8C20180-SX2I ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
CY8C20180-SX2I Présentation
A capacitive-touch controller is a type of interface IC that detects changes in electrical capacitance caused by a user touching an external sensor electrode. In a knowledge-graph hierarchy, the CY8C20180-SX2I belongs to the CapSense controller family, interface ICs, and semiconductor devices. Its four configurable I/O resources can be assigned to capacitive-sensing buttons or used as GPIOs for driving LEDs or interrupt functions, allowing a small control panel to replace mechanical switches.
The key verified features are four configurable I/O channels, capacitive sensing of up to four buttons, 3 V operation, 2 kbit density, eight-pin SOIC packaging, and an extended -40 °C to +85 °C temperature range. The distributor listing also identifies the part as an Infineon capacitive-touch button controller. Exact pin names, device-programming details, current consumption, and electrical timing limits were not included in the supplied source data and therefore are not inferred here.
The CY8C20180-SX2I is suitable for low-voltage embedded user interfaces where a dedicated touch controller simplifies front-panel design. Its small SOIC footprint helps preserve board area in compact products, while configurable I/O supports shared sensing and general-purpose control requirements. The I2C-related functionality mentioned in comparison data should be verified against the manufacturer datasheet before final firmware and PCB sign-off.
Typical applications include appliance control panels, small consumer products, industrial interface modules, LED status indicators, and embedded keypad or button assemblies. For a new design, confirm the exact sensor geometry, electrode size, grounding, shielding, and firmware configuration using the manufacturer application guidance. The -40 °C to +85 °C range makes the part suitable for industrial-temperature indoor products when the surrounding enclosure and connector system are also qualified.
A practical design consideration is to keep capacitive-sensing traces short and keep the touch electrode away from high-current switching nodes and noisy sources. The controller does not eliminate the need for careful analog layout, filtering, calibration, and environmental tuning. This page synthesizes verified distributor specifications, replacement research, package information, and practical integration guidance while clearly separating missing datasheet details from confirmed values.
Alternatives de remplacement direct pour CY8C20180-SX2I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
CY8C20110-SX2I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CY8C20180-SX2I Spécifications
| Product Type | CapSense Lite capacitive-touch controller |
| Configurable I/O Count | 4 |
| Capacitive Sensing Inputs | Up to 4 capacitive sensing buttons |
| Tension d'alimentation | 3 V |
| Density | 2 kbits |
| Number of Words | 2 k |
| Bits per Word | 1 bit |
| Package Type | SOIC, 0.150 inch, MS-012 |
| Package Pin Count | 8 pins |
| Température de fonctionnement | -40 °C to +85 °C |
| GPIO Usage | Configurable GPIOs for LEDs or interrupt functions |
| Interface Configuration | I2C configuration, based on comparison-source description |
| Manufacturer Category | Capacitive touch buttons |
| Type de montage | Surface mount |
| Supplier Description | CapSense Express capacitive-touch controller |
| Product Family | CapSense Express |
Guide de configuration des broches du CY8C20180-SX2I 8 pins
Configuration des broches du CY8C20180-SX2I (boîtier 8 pins). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour CY8C20180-SX2I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
CY8C20180-SX2I convient pour 6 applications: Appliance Control Panel, Consumer Device Button Interface, Industrial Equipment Interface, LED Status and Control Interface, Embedded Keypad Module, Compact Sensor and IoT Module.
Appliance Control Panel
The CY8C20180-SX2I is appropriate for compact appliance panels that use sealed capacitive buttons instead of exposed mechanical switches. Its four configurable I/O channels can serve up to four sensing electrodes, while the GPIO capability can support LED state indication or interrupt signaling. Using a dedicated controller keeps the host processor focused on product functions and allows touch behavior to be tuned independently. The 3 V supply and -40 °C to +85 °C range align with many low-voltage embedded control systems, but panel construction, electrode spacing, grounding, and calibration remain critical.
Recommandé
Consumer Device Button Interface
The CY8C20180-SX2I can serve as a small front-panel interface in consumer products where a glass or plastic surface requires sealed capacitive controls. Four configurable sensing resources provide a practical channel count for power, mode, volume, or function buttons, while unused resources may be assigned as GPIOs. Its SOIC-8 package helps limit board area in compact designs. Engineers must validate user experience through actual enclosure materials, electrode geometry, temperature testing, and firmware calibration rather than relying only on the controller’s nominal channel count.
Recommandé
Industrial Equipment Interface
The CY8C20180-SX2I fits low-voltage industrial equipment that needs a compact human interface in a control enclosure. The -40 °C to +85 °C specification is useful for indoor industrial environments, and capacitive sensing avoids exposed mechanical contacts that can collect dirt or wear. The controller can detect up to four buttons and provide GPIO-driven indication or interrupt functions around the equipment. Because the supplied data does not specify transient immunity, power limits, or environmental qualification beyond temperature, the final assembly requires system-level validation.
Recommandé
LED Status and Control Interface
The configurable GPIO resources allow the CY8C20180-SX2I to combine capacitive input detection with simple LED indication functions. A product can allocate one or more channels to touch sensing and use other channels for status LEDs, subject to the exact pin and current limits in the manufacturer datasheet. This can reduce the number of host GPIO pins and simplify panel wiring. The design should include suitable LED current limiting and verify whether the device’s electrical limits support the intended load; those limits are not present in the supplied source data.
Recommandé
Embedded Keypad Module
The CY8C20180-SX2I is suitable for a small embedded keypad or function-button module requiring up to four capacitive inputs. Its configurable architecture allows the design to share the available I/O between sensing and auxiliary digital functions, reducing the need for a larger host-controller footprint. The 3 V supply supports integration into low-voltage embedded systems, while the extended temperature range provides useful design headroom for industrial-temperature products. Firmware must define debouncing, sensitivity, idle behavior, and fault handling, and the mechanical assembly must be tested for humidity and contamination effects.
Recommandé
Compact Sensor and IoT Module
The CY8C20180-SX2I can provide local capacitive controls for a compact IoT module where users need a local button or configuration interface. Four channels are enough for a small control surface, while the controller’s configurable I/O can support indicator or interrupt functions without allocating every pin to sensing. The SOIC-8 package is useful when board area is constrained. Because the supplied data does not specify low-power modes, host-interface timing, or maximum GPIO loading, those details must be confirmed from the manufacturer datasheet before battery-powered deployment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour CY8C20180-SX2I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | CY8C20110-SX2I |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Drop-In Status | Original target | Infineon community result identifies the part as pin-compatible |
Principaux différenciateurs
- Four-channel capacitive and GPIO flexibility (vs CY8C20110-SX2I)
- Verified 3 V supply specification (vs CY8C20110-SX2I)
- Extended temperature specification (vs CY8C20110-SX2I)
Notes de conception
Keep the capacitive-sensing traces short and route them away from high-current switching paths, inductors, oscillators, and other noisy sources. The supplied data confirms the SOIC-8 package and four configurable I/O channels but does not provide a reference PCB layout, so use the manufacturer layout guidance before production release.
Do not assume that four available I/O channels automatically equal four simultaneously usable touch electrodes. Some channels may be assigned to GPIOs, LEDs, interrupts, or other functions. Allocate pins against the exact manufacturer pinout and confirm the device configuration through the manufacturer’s firmware and application guidance.
Validate the complete touch interface with the intended enclosure, electrode shape, spacer, overlay, grounding, and cable arrangement. Capacitive sensing is affected by mechanical construction and environmental conditions, so laboratory button detection does not by itself guarantee production touch performance. The verified -40 °C to +85 °C range is a component specification, not proof that every enclosure material remains stable across that range.
Informations de conformité
The supplied distributor and manufacturer-related search results do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.
