ISO6762FDWR - 6-Channel Digital Isolator 50Mbps | TI
Référence : ISO6762FDWR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.56 | $25,60 |
| 100 | $2.05 | $205,00 |
| 500 | $1.82 | $910,00 |
| 1 000 | $1.65 | $1 650,00 |
ISO6762FDWR Présentation
Digital isolators are components that provide galvanic isolation between two circuit domains while allowing digital signals to pass across the isolation barrier. They are essential in applications where ground potential differences, noise, or safety requirements demand separation, such as in industrial automation, motor drives, and medical equipment. The ISO6762FDWR uses capacitive isolation technology, which offers high-speed data transfer with low power consumption and excellent EMC performance, as highlighted in the datasheet.
Key features of the ISO6762FDWR include its 50 Mbps data rate, which supports high-speed protocols like SPI and RS-485, and its 1.8V logic support, enabling direct interface with low-voltage microcontrollers. The device also features an enable pin for output control, fail-safe outputs that default to a known state when inputs are unpowered, and a wide temperature range. Its reinforced isolation rating ensures reliable operation in safety-critical applications.
The ISO6762FDWR is built on TI's capacitive isolation technology, which uses high-voltage capacitors to couple signals across the barrier. This architecture provides low propagation delay and high CMTI, making it suitable for applications where fast transients are present. The device also includes integrated noise filtering to enhance signal integrity.
Typical applications include isolating SPI, RS-232, RS-485, and CAN buses in industrial control systems, motor drives, and power converters. Its high data rate and robust isolation make it ideal for communication interfaces in factory automation and building automation.
When designing with the ISO6762FDWR, ensure proper PCB layout with adequate clearance and creepage distances under the isolator to maintain the rated isolation voltage. Also, place decoupling capacitors close to the VCC pins to minimize noise.
Alternatives de remplacement direct pour ISO6762FDWR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ISO6762FDWR (même facteur de forme et même empreinte) — différant par CMTI, Operating Temperature, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ISO6762DWR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ISO6762FQDWQ1
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ISO6762FDWRQ1
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ISO6760DWR
✅ Remplacement direct✓ En stock
$0.94 / unité
Voir la fiche technique →ADuM1402
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
Si8642
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ISO6762FDWR Spécifications
| Number of Channels | 6 (4 forward, 2 reverse) |
| Débit de données | 50 Mbps |
| Isolation Voltage | 5000 Vrms |
| CMTI | 50 kV/µs |
| Supply Voltage (VCC1/VCC2) | 1.8V to 5.5V |
| Boîtier | SOIC-16 (DW) 7.50mm |
| Température de fonctionnement | -40°C to 125°C |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
| Logic Support | 1.8V logic support |
| Isolation Type | Capacitive |
| Fail-Safe Output | Yes |
| Broche d'activation | Yes |
Configuration des broches de ISO6762FDWR
| Broche 1 | VCC1 — Supply voltage for side 1 |
| Broche 2 | GND1 — Ground for side 1 |
| Broche 3 | INA — Input channel A |
| Broche 4 | INB — Input channel B |
| Broche 5 | INC — Input channel C |
| Broche 6 | IND — Input channel D |
| Broche 7 | EN1 — Enable for side 1 outputs |
| Broche 8 | GND1 — Ground for side 1 |
| Broche 9 | OUTE — Output channel E (reverse) |
| Broche 10 | OUTF — Output channel F (reverse) |
| Broche 11 | GND2 — Ground for side 2 |
| Broche 12 | EN2 — Enable for side 2 outputs |
| Broche 13 | OUTA — Output channel A |
| Broche 14 | OUTB — Output channel B |
| Broche 15 | OUTC — Output channel C |
| Broche 16 | VCC2 — Supply voltage for side 2 |
Applications typiques
ISO6762FDWR convient pour 6 applications: Industrial Automation, Motor Drives, Power Converters, Medical Equipment, Building Automation, Test and Measurement.
Industrial Automation
The ISO6762FDWR provides galvanic isolation for communication interfaces in industrial automation systems, such as PLCs and motor drives. Its 50 Mbps data rate supports high-speed fieldbus protocols, while the 5000 Vrms isolation ensures safety in high-voltage environments. The device's high CMTI of 50 kV/µs prevents data corruption from fast transients, making it reliable in noisy factory floors. It can be used to isolate SPI, RS-485, and CAN buses between controllers and remote I/O modules.
Recommandé
Motor Drives
In motor drive applications, the ISO6762FDWR isolates control signals from the high-voltage power stage. Its 50 Mbps data rate allows fast PWM signal transmission, and the 5000 Vrms isolation protects low-voltage control circuits from high-voltage transients. The high CMTI ensures reliable operation in the presence of fast switching noise. The device can be used to isolate gate driver signals and feedback signals in variable frequency drives.
Recommandé
Power Converters
The ISO6762FDWR is used in power converters to isolate control and feedback signals across the isolation barrier. Its 5000 Vrms isolation rating meets safety requirements for mains-connected systems. The device's 1.8V logic support allows direct interface with low-voltage microcontrollers, simplifying the design. The high data rate enables fast communication for digital power control loops.
Recommandé
Medical Equipment
In medical equipment, the ISO6762FDWR provides patient isolation for communication interfaces. Its 5000 Vrms isolation rating meets stringent safety standards, and the wide temperature range ensures reliable operation. The device's low power consumption is beneficial for battery-powered devices. It can be used to isolate data lines in patient monitoring systems and diagnostic equipment.
Recommandé
Building Automation
The ISO6762FDWR is used in building automation systems to isolate communication buses like RS-485 and BACnet. Its 50 Mbps data rate supports high-speed data transfer, and the 5000 Vrms isolation protects against ground loops and surges. The device's compact SOIC-16 package is suitable for space-constrained controllers. It can be used in HVAC controllers, lighting systems, and access control panels.
Recommandé
Test and Measurement
In test and measurement equipment, the ISO6762FDWR isolates sensitive measurement circuits from noisy digital systems. Its high CMTI and low propagation delay ensure accurate signal transmission. The device's wide supply voltage range allows integration into various designs. It can be used to isolate data acquisition systems, oscilloscopes, and signal generators.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ISO6762FDWR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ISO6762DWR | ISO6762FQDWQ1 | ADuM1402 |
|---|---|---|---|---|
| Package | SOIC-16 (DW) | SOIC-16 (DW) | SOIC-16 (DW) | SOIC-16 (DW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Number of Channels | 6 (4/2) | 6 (4/2) | 6 (4/2) | 4 (4/0) |
| Data Rate | 50 Mbps | 50 Mbps | 50 Mbps | 10 Mbps |
| Isolation Voltage | 5000 Vrms | 5000 Vrms | 5000 Vrms | 2500 Vrms |
| CMTI | 50 kV/µs | 50 kV/µs | 50 kV/µs | 25 kV/µs |
| Supply Voltage | 1.8V to 5.5V | 1.8V to 5.5V | 1.8V to 5.5V | 3.0V to 5.5V |
| Automotive Grade | No | No | Yes (AEC-Q100) | No |
Principaux différenciateurs
- Higher data rate (50 Mbps) compared to ADuM1402 (10 Mbps) (vs ADuM1402)
- Higher isolation voltage (5000 Vrms) compared to ADuM1402 (2500 Vrms) (vs ADuM1402)
- Automotive grade option available (ISO6762FQDWQ1) (vs ISO6762DWR)
Notes de conception
Ensure proper PCB layout with adequate clearance and creepage distances under the isolator to maintain the rated isolation voltage. Place decoupling capacitors (0.1µF) close to VCC1 and VCC2 pins to minimize noise.
The ISO6762FDWR operates from 1.8V to 5.5V on both sides. Ensure that the supply voltages are within the specified range and that the power supply is stable. Use separate ground planes for side 1 and side 2 to maintain isolation.
Do not exceed the absolute maximum ratings for supply voltage or isolation voltage. Ensure that the enable pins are properly configured to avoid unintended output states. Verify the channel configuration (4/2) matches your application requirements.
Informations de conformité
RoHS compliant per TI product page. AEC-Q100 not applicable for standard version; automotive grade available as ISO6762FQDWQ1.
