JHL9580 - Thunderbolt 5 Dual Port Host Controller | Intel
Référence : JHL9580 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $35.5 | $35,50 |
| 10 | $33.2 | $332,00 |
| 100 | $30.1 | $3 010,00 |
| 500 | $27.85 | $13 925,00 |
| 1 000 | $25.4 | $25 400,00 |
JHL9580 Présentation
A Thunderbolt controller is a high-speed I/O protocol chip that aggregates PCI Express, DisplayPort, USB, and power delivery onto a single USB Type-C connector. Within the host-side I/O hierarchy, JHL9580 sits below the platform chipset PCIe root complex and above the physical USB-C receptacle, translating PCIe packets and DP lanes into Thunderbolt 5 tunnels for downstream peripherals, storage, and displays.
Key features include PCIe 4.0 x4 upstream connectivity, dual Thunderbolt 5 / USB4 v2 Type-C ports, downstream daisy-chain support for up to 5 devices per port (10 devices total), DisplayPort 2.1 with UHBR20 link training, and USB PD 3.1 EPR signaling. The controller is fabricated as an FC-CSP (Flip-Chip Chip-Scale Package) with a compact footprint suitable for M.2 add-in cards and half-length PCIe boards. According to Intel's product brief, JHL9580 supports dynamic bandwidth rebalancing between its two ports for asymmetric traffic patterns.
Architecturally, JHL9580 uses Intel's fifth-generation Thunderbolt silicon (Barlow Ridge) with updated re-timers and enhanced DP 2.1 muxing. It maintains protocol compatibility with Thunderbolt 4 (JHL9540) and Thunderbolt 3 ecosystems downstream, enabling legacy docking and storage backward compatibility. The PCIe 4.0 x4 host interface doubles upstream bandwidth compared to the prior generation Thunderbolt 4 controllers (which were limited to PCIe 3.0 x4).
Typical applications include Thunderbolt 5 add-in cards for desktop workstations, premium docking stations, external GPU enclosures, 8K/120 Hz capture rigs, and ultra-fast NVMe RAID enclosures. The 80 Gb/s symmetric / 120 Gb/s asymmetric bandwidth makes it ideal for uncompressed video pipelines and high-throughput storage workloads. The same silicon is also offered in lower-cap configurations (JHL9540 / JHL9440 / JHL9480) with bandwidth caps at 40 Gbps.
When designing with JHL9580, ensure the platform provides a PCIe 4.0 capable slot and adequate auxiliary power (typically the Aux rail for the add-in card). Board layout must follow Intel's USB Type-C routing guidelines with length-matched differential pairs for the high-speed channels.
This page consolidates Intel ordering information, Mouser/Octopart pricing, FC-CSP pin map, and Thunderbolt-ecosystem alternatives not found on a single distributor listing.
Alternatives de remplacement direct pour JHL9580 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec JHL9580 (même facteur de forme et même empreinte) — différant par Host Interface, USB Power Delivery.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
JHL9480
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
JHL9540
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
JHL9440
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
JHL8540
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
JHL9580 S RN7W
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
JHL9580 S RN7X
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
JHL9580 Spécifications
| Product Type | Thunderbolt 5 Host Controller |
| Codename | Barlow Ridge |
| Host Interface | PCIe 4.0 x4 |
| Downstream Ports | 2 x USB Type-C (Thunderbolt 5 / USB4 v2) |
| Bandwidth (Symmetric) | 80 Gb/s bi-directional |
| Bandwidth (Asymmetric) | 120 Gb/s single-direction |
| Display Output | DisplayPort 2.1 (8K@60Hz, UHBR20) |
| USB Power Delivery | PD 3.1 EPR up to 100 W per port |
| Daisy Chain | Up to 5 devices per port (10 total) |
| Package Type | FC-CSP (Flip-Chip Chip-Scale Package) |
| Type de montage | Surface Mount |
| Température de fonctionnement | 0 C to +70 C (commercial) |
| Niveau MSL | 3 |
| Statut RoHS | Compliant |
| Lead-free | Yes |
Guide de configuration des broches du JHL9580 fc-csp (flip-chip chip-scale package)
Configuration des broches du JHL9580 (boîtier fc-csp (flip-chip chip-scale package)). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour JHL9580.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
JHL9580 convient pour 6 applications: Thunderbolt 5 Desktop Add-in Cards, Premium Thunderbolt 5 Docking Stations, External GPU (eGPU) Enclosures, 8K Video Capture and Editing Rigs, Ultra-Fast NVMe RAID Enclosures, Workstation Motherboard Onboard Ports.
Thunderbolt 5 Desktop Add-in Cards
The JHL9580 is the primary Thunderbolt 5 host controller on half-length PCIe 4.0 add-in cards such as the Gigabyte GC-TBT5. Its 80/120 Gb/s bandwidth and PCIe 4.0 x4 host interface deliver a 2x upstream improvement over the JHL8540 Thunder l -pin TB4 cards. The FC-CSP footprint plus dual USB Type-C enables two fully independent TB5 ports on a single slot card, each capable of daisy-chaining 5 downstream devices and passing DisplayPort 2.1 UHBR20 to an 8K@60Hz monitor. Compared to lower-cost ASMedia ASM4242 cards, the JHL9580-based AIC supports DP 2.1 muxing and full TB5 tunneled protocols required by high-end workstations.
Recommandé
Premium Thunderbolt 5 Docking Stations
In a docking station the JHL9580 aggregates dual TB5 / USB4 v2 downstream ports with multi-port PD 3.1 fast charging up to 100 W per port, plus downstream PCIe tunneling for storage peripherals. Its PCIe 4.0 x4 host uplink (vs PCIe 3.0 x4 on Maple Ridge docks) removes the upstream bottleneck for dual-port docks serving 8K displays, NVMe RAID enclosures, and external GPU workloads concurrently. The controller's asymmetric 120 Gb/s single-direction mode allows video capture or external SSD writes at full pipeline speed without symmetric round-trip overhead.
Recommandé
External GPU (eGPU) Enclosures
For eGPU enclosures the JHL9580's PCIe 4.0 x4 tunnel offers roughly 8 GB/s of GPU-to-host bandwidth, a substantial improvement over Thunderbolt 3's 4 GB/s PCIe 3.0 x4 ceiling and a meaningful leap over Thunderbolt 4. The dual Type-C ports also enable simultaneous GPU passthrough and DisplayPort 2.1 alt-mode display output via a single chip, eliminating the need for a secondary mux device on the PCB. Compared to the ASMedia ASM2464PD, the JHL9580 supports full Thunderbolt tunneled PCIe (eGFX compatibility), which the USB4-only device silicon does not.
Recommandé
8K Video Capture and Editing Rigs
The JHL9580's symmetric 80 Gb/s and asymmetric 120 Gb/s modes make it a natural fit for uncompressed 8K60 capture ingest over Thunderbolt, where raw bitrate exceeds 48 Gb/s after overhead. DisplayPort 2.1 UHBR20 passthrough allows an editor's color-graded 8K monitor to share the same daisy chain as the capture enclosure. The PCIe 4.0 x4 host uplink ensures the RAID/NVMe storage tier behind the controller does not become the bandwidth bottleneck.
Recommandé
Ultra-Fast NVMe RAID Enclosures
NVMe RAID enclosures benefit from the JHL9580's full PCIe 4.0 x4 host and TB5 tunneling. A multi-drive RAID-0 array built from PCIe 4.0 NVMe SSDs can saturate the JHL9580's 80 Gb/s symmetric tunnel, enabling sequential reads above 5 GB/s over a single Type-C cable. The dual-port design lets users connect both the host and a downstream display through the same enclosure, while the FC-CSP package keeps the enclosure PCB footprint compatible with M.2-sized reference designs.
Recommandé
Workstation Motherboard Onboard Ports
Higher-end workstation motherboards integrate the JHL9580 directly to provide native Thunderbolt 5 ports, eliminating the need for a separate AIC. The FC-CSP reflow profile is compatible with standard SMT lines, and Intel's reference design includes the re-timer, PD 3.1 controller, and USB-C receptacle as a complete BOM. Compared to the JHL8540 (TB4) silicon, the JHL9580 halves the upstream PCIe bottleneck and unlocks DP 2.1 8K HDR with a single chip.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour JHL9580 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | JHL9480 | JHL9540 | JHL9440 | JHL8540 | JHL9580 S RN7W | JHL9580 S RN7X |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | FC-CSP | FC-CSP | FC-CSP | FC-CSP | FC-CSP | FC-CSP | FC-CSP |
| Host Interface | PCIe 4.0 x4 | PCIe 4.0 x4 | PCIe 4.0 x4 | PCIe 4.0 x4 | PCIe 3.0 x4 | PCIe 4.0 x4 | PCIe 4.0 x4 |
| Thunderbolt Generation | Thunderbolt 5 (80/120 Gb/s) | Thunderbolt 5 | Thunderbolt 4 (firmware-capped) | Thunderbolt 4 (firmware-capped) | Thunderbolt 4 | Thunderbolt 5 | Thunderbolt 5 |
| Downstream Ports | 2 x USB Type-C | 1 x USB Type-C | 2 x USB Type-C | 2 x USB Type-C | 2 x USB Type-C | 2 x USB Type-C | 2 x USB Type-C |
| DisplayPort Support | DP 2.1 UHBR20 (8K@60Hz) | DP 2.1 UHBR20 | DP 2.1 UHBR20 (firmware-locked to TB4 tunneling) | DP 2.1 | DP 2.0 (8K passthrough, UHBR10) | DP 2.1 UHBR20 | DP 2.1 UHBR20 |
| USB Power Delivery | PD 3.1 EPR, up to 100 W/port | PD 3.1 EPR | PD 3.1 EPR | PD 3.0 | PD 3.0 | PD 3.1 EPR, up to 100 W/port | PD 3.1 EPR, up to 100 W/port |
| Silicon Family | Barlow Ridge (TB5) | Barlow Ridge (TB5) | Barlow Ridge (TB5 firmware cap) | Barlow Ridge (TB5 firmware cap) | Maple Ridge (TB4) | Barlow Ridge (TB5) | Barlow Ridge (TB5) |
Principaux différenciateurs
- Higher upstream PCIe bandwidth (vs JHL8540)
- Full Thunderbolt 5 silicon, not firmware-capped (vs JHL9540)
- Dual-port density in a single chip (vs JHL9480)
Notes de conception
The JHL9580 add-in card implementation requires the PCIe slot 3.3 V and 12 V rails plus an auxiliary cable (typically 6-pin PCIe with 6 + 12 V input). Under full TB5 load with both ports active and 100 W PD output per port, total board power can exceed 230 W; ensure the slot and auxiliary power budget is jointly sized for the host PCIe slot. The FC-CSP requires all supply rails ramped monotonically per Intel power-up sequencing.
PCB layout for the JHL9580 must follow Intel's Thunderbolt 5 reference design: length-matched Thunderbolt differential pairs (TX/RX) within 5 mil tolerance, no splits across the inner layer reference plane, and a high-speed re-timer placed within 25 mm of the USB-C receptacle. DisplayPort auxiliary lanes and sideband signals (USB PD CC, SBU) must be guarded against the main TX/RX pairs with at least 6W/6S spacing on inner layers.
A common mistake is using a JHL8540 (Maple Ridge, TB4) reference design footprint for a JHL9580 board; although both are FC-CSP, the Barlow Ridge BGA pitch and pad diameter differ. Always re-import the Intel JHL9580 reference schematic and check pin 1 orientation against the mechanical drawing. Mixing Thunderbolt firmware images between Barlow Ridge and Maple Ridge parts will prevent BIOS enumeration.
Informations de conformité
RoHS compliant per Intel product page. Not AEC-Q100 qualified (consumer/industrial I/O controller, not automotive). Halogen-free status not explicitly stated in verified sources.
