KSZ8863MLL 3-Port 10/100 Managed Ethernet Switch | Microchip
Référence : KSZ8863MLL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.3197 | $3,32 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
KSZ8863MLL Présentation
An Ethernet switch IC is a network-interface device that connects multiple Ethernet nodes through integrated PHYs and internal switching logic. The KSZ8863MLL belongs to the Ethernet switch family, which sits within network interface semiconductors and broader embedded communication systems. Its managed-switch features include port- and tag-based VLAN support, QoS priority, link management, and CPU-controlled configuration through I2C or SPI. These capabilities make it suitable when a design needs more deterministic LAN behavior than an unmanaged switch provides.
The MLL variant is intended for 2.5 V and 3.3 V systems and supports 10BASE-T and 100BASE-TX operation on two PHY ports. The third port includes an MII interface for connection to a host processor or another Ethernet controller. The supplied product information identifies the device as a 48-LQFP (7x7 mm) part with a 48-pin package and a 100 Mbps Ethernet switch classification.
The KSZ8863MLL is useful in industrial embedded systems, compact controllers, factory equipment, and network appliances where three Ethernet paths are needed without implementing a full-size switching ASIC. Its small package and integrated PHYs reduce external PHY count and simplify board design. Configuration can be handled through the CPU interface, while VLAN and QoS features help organize traffic and improve network behavior.
Designers should follow the manufacturer datasheet and hardware design checklist for pin assignments, reset timing, clock requirements, magnetic-component selection, and power sequencing. The reset input is active-low, and a hardware reset is required after power-up according to the KSZ8863MLL hardware design checklist. Board layout, magnetics isolation, impedance-controlled traces, and bypass-capacitor placement are critical because Ethernet interfaces are sensitive to return-path and signal-integrity issues.
This page combines the verified manufacturer product information, distributor identification, package details, pricing reference, and practical design guidance for engineers evaluating the KSZ8863MLL. It is intended to help determine whether this 3-port Ethernet switch fits a specific embedded networking design before consulting the complete manufacturer documentation.
Alternatives de remplacement direct pour KSZ8863MLL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec KSZ8863MLL (même facteur de forme et même empreinte) — différant par Package, QoS, VLAN Support.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
KSZ8863RLL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KSZ8863FLL
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →KSZ8863
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KSZ8863MLL Valeurs maximales et caractéristiques électriques
| Product Type | Integrated 3-port 10/100 managed Ethernet switch with PHYs |
| Débit de données | 10/100 Mbps |
| Port Count | 3 ports |
| Copper PHY Support | 10BASE-T and 100BASE-TX |
| CPU Interface | I2C and SPI |
| MII Interface | 1 MII interface |
| Tension d'alimentation | 2.5 V and 3.3 V |
| Plage de tension d'entrée | 1.67 V to 3.465 V |
| Boîtier | 48-lead LQFP (7x7 mm) |
| Nombre de broches | 48 pins |
| Type de montage | Surface Mount |
| Reset | Active-low RSTN input at pin 47; hardware reset required after power-up |
| VLAN Support | Port- and tag-based VLAN |
| QoS | QoS priority |
| Power Management | Advanced power management |
| RoHS | Compliant |
Configuration des broches de KSZ8863MLL
| Broche 1 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 2 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 3 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 4 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 5 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 6 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 7 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 8 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 9 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 10 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 11 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 12 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 13 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 14 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 15 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 16 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 17 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 18 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 19 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 20 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 21 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 22 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 23 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 24 | SMTXER3/MII_LINK_3 — Mode-control signal associated with the third port and MII link or bypass behavior, according to the verified manufacturer datasheet search result. |
| Broche 25 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 26 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 27 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 28 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 29 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 30 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 31 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 32 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 33 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 34 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 35 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 36 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 37 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 38 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 39 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 40 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 41 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 42 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 43 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 44 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 45 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 46 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
| Broche 47 | RSTN — Active-low hardware reset input; a hardware reset is required after power-up according to the verified hardware design checklist. |
| Broche 48 | [DATA_NEEDED: pin name] — Pin function must be confirmed from the current manufacturer datasheet package drawing. |
Applications typiques
KSZ8863MLL convient pour 6 applications: Embedded Industrial Ethernet Control, Compact Network Gateway, Industrial Sensor and Controller Hub, Factory Equipment Network Interface, Managed Network Appliance, Low-Cost Ethernet Communication Module.
Embedded Industrial Ethernet Control
The KSZ8863MLL fits compact industrial controllers that need three managed 10/100 Ethernet paths without implementing separate PHY devices. Its two copper PHY ports support 10BASE-T and 100BASE-TX, while the MII interface provides a path for a host processor or additional network controller. VLAN and QoS features help separate control traffic from other network activity, and the 48-LQFP package keeps the footprint manageable. Designers should validate reset, clock, magnetics, and power sequencing against the Microchip hardware design checklist before releasing the PCB.
Recommandé
Compact Network Gateway
A gateway product can use the KSZ8863MLL to provide a small managed Ethernet switching block between service ports and an upstream processor. The integrated 10/100 PHYs reduce external component count, while I2C or SPI control allows a host processor to configure VLANs, priorities, and port behavior. This arrangement is useful when the product needs more than a simple two-port PHY arrangement but does not require the port count or media capabilities of a larger switch. Firmware must handle reset initialization and verify link status through the CPU interface.
Recommandé
Industrial Sensor and Controller Hub
The KSZ8863MLL is appropriate for a sensor or controller hub that needs to aggregate several 10/100 Ethernet nodes into a small embedded network. Three switch paths can connect local sensors, a service interface, and a host controller while retaining managed traffic behavior. Port- and tag-based VLAN support can segment devices by role, and QoS priority can help protect time-sensitive traffic from bulk data. The design must still account for Ethernet magnetics, connector isolation, controlled impedance, and the requirement for hardware reset after power-up.
Recommandé
Factory Equipment Network Interface
Use the KSZ8863MLL in factory equipment that needs a low-port-count managed Ethernet interface for status reporting, configuration, and service connectivity. Its 10/100 Mbps operation is consistent with legacy industrial Ethernet installations, and the integrated PHYs simplify the analog network path. VLAN support provides a mechanism for separating equipment traffic from shared plant networks, while the CPU interface permits centralized monitoring and configuration. Engineers should verify environmental temperature requirements, transient immunity, grounding, and connector implementation because those specifications were not provided in the verified search data.
Recommandé
Managed Network Appliance
The KSZ8863MLL can serve as the Ethernet switching element in a small appliance that needs managed port behavior rather than an unmanaged repeater. Its I2C and SPI host interfaces support firmware-driven setup, while VLAN and QoS features provide practical traffic organization. The 48-LQFP package is useful when the system needs three switch ports in a limited board area. A complete design still requires appropriate Ethernet transformers or magnetics, a compliant clock and power network, and careful separation between sensitive PHY routing and switching or processor signals.
Recommandé
Low-Cost Ethernet Communication Module
The KSZ8863MLL is suitable for a communication module that needs multiple Ethernet endpoints at 10/100 Mbps while keeping power and board complexity controlled. The integrated PHYs provide a direct copper Ethernet path, and the third port can be used with the MII interface for processor connectivity. This arrangement can reduce the number of discrete network components in cost-sensitive embedded products. Before production, verify the exact MLL ordering code, supply voltage implementation, reset timing, and all pin-level requirements in the current manufacturer datasheet.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour KSZ8863MLL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | KSZ8863RLL | KSZ8863FLL | KSZ8863 |
|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) per related family context | 48-LQFP (7x7 mm) per related family context | 48-LQFP (7x7 mm) family identifier |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Port Count | 3 ports | 3 ports | 3 ports | 3 ports |
| Ethernet Data Rate | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps class; media-specific details require datasheet confirmation | 10/100 Mbps |
| Copper PHY Support | 10BASE-T and 100BASE-TX | 10BASE-T and 100BASE-TX | 100BASE-FX emphasis; copper-PHY details require confirmation | Family-level copper support; verify exact suffix |
Principaux différenciateurs
- Integrated managed switching in a 3-port device (vs Discrete Ethernet PHY and switch architecture)
- Copper-PHY positioning (vs KSZ8863FLL)
- CPU-managed configuration (vs Basic unmanaged Ethernet switches)
- Compact 48-LQFP implementation (vs Larger multi-component Ethernet solutions)
Notes de conception
Implement the KSZ8863MLL power network with the voltage range and sequencing requirements from the current Microchip datasheet. Place required bypass capacitors close to the supply and ground pins, keep high-current return paths short, and isolate sensitive Ethernet PHY sections from noisy switching nodes. The verified search data identifies 2.5 V and 3.3 V operation and a 1.67 V to 3.465 V input range, but does not provide complete decoupling values or regulator-selection guidance.
Use the Microchip KSZ8863MLL hardware design checklist as the PCB-layout baseline. Route copper Ethernet pairs as controlled-impedance differential pairs, provide a continuous ground reference, keep the PHY and magnetics area physically separated from switching and CPU circuitry, and avoid stubs. Confirm the exact 48-LQFP land pattern and pin functions against the current package drawing rather than relying on distributor package descriptions alone.
Do not assume that all KSZ8863 suffixes are interchangeable. The verified manufacturer development-tool description states that KSZ8863FLL supports 100BASE-FX, while KSZ8863MLL and KSZ8863RLL support copper 10BASE-T and 100BASE-TX. A replacement decision must check the ordering suffix, PHY media, pin-level functions, management features, reset behavior, and software assumptions.
Ethernet link integrity depends on careful return-path and isolation design. Keep the MII and CPU-control traces away from transformer-side and high-energy copper PHY routing where practical, use continuous ground planes, and follow the manufacturer’s recommended magnetics and termination arrangements. The verified material does not provide complete impedance, insertion-loss, or isolation-voltage targets, so those values must be obtained from the latest datasheet and hardware checklist.
Informations de conformité
RoHS compliance is stated in the verified PartGenie result. The supplied verified data does not establish REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The KSZ8863 is an Ethernet interface IC, so automotive qualification is not inferred.
