KSZ9021RN Gigabit Ethernet Transceiver | Microchip
Référence : KSZ9021RN ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.5948 | $6,59 |
| 10 | $6.5948 | $65,95 |
| 100 | $6.5948 | $659,48 |
| 500 | $6.5948 | $3 297,40 |
| 1 000 | $6.5948 | $6 594,80 |
| 3 000 | $6.5948 | $19 784,40 |
KSZ9021RN Présentation
An Ethernet PHY, or physical-layer transceiver, converts digital data from a network controller into electrical signals for copper cabling and converts received signals back into digital data. The KSZ9021 belongs to the Ethernet transceiver hierarchy alongside network-interface controllers, magnetics, connectors, and CAT5e/CAT6 cabling. It handles the physical layer while the linked controller manages higher-level frame processing.
The device supports automatic negotiation of 10, 100, or 1000 Mbps operation. Its RGMII interface is associated with the KSZ9021R configuration, while the datasheet describes 3.3 V/2.5 V-tolerant digital I/O and configurable timing delays on both transmit and receive paths. Loopback modes support verification of analog and digital paths, and Micrel LinkMD TDR-based cable diagnostics can identify faulty copper cables.
The KSZ9021RN is the smaller package option within the KSZ9021 family. The manufacturer offers the same transceiver in a 64-pin lead-free E-LQFP as KSZ9021RL, a 64-pin lead-free QFN as KSZ9021GN, and a 128-pin lead-free PQFP as KSZ9021GQ. Only the 48-pin QFN ordering code is mechanically interchangeable with an existing KSZ9021RN footprint; the other family packages require PCB changes.
Typical uses include industrial Ethernet equipment, network controllers, routers, switches, IP cameras, and embedded systems requiring a copper Ethernet physical layer. The RGMII timing controls are especially useful when signal-integrity or propagation-delay differences between controller and PHY require board-level compensation.
Design the 48-QFN layout according to the manufacturer footprint and datasheet guidance, paying particular attention to exposed-pad thermal dissipation, copper-return paths, magnetics isolation, and RGMII trace matching. Confirm device programming, strap configuration, clock requirements, cable support, and operating-temperature grade before releasing a production design.
This page consolidates verified manufacturer and distributor information, separates genuine drop-in choices from package variants, and adds application, sourcing, and design guidance beyond a basic distributor listing. Values not explicitly supplied by the verified sources remain explicitly marked as needed rather than estimated.
Alternatives de remplacement direct pour KSZ9021RN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec KSZ9021RN (même facteur de forme et même empreinte) — différant par Auto-Negotiation, Operating Temperature, Package, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesKSZ9021RN Spécifications
| Product Type | Single-chip Gigabit Ethernet transceiver with RGMII support |
| Supported Data Rates | 10/100/1000 Mbps |
| Ethernet Compliance | IEEE 802.3 |
| Host Interface | RGMII for the KSZ9021R configuration |
| Tension d'alimentation | 3.3 V |
| Interface I/O Tolerance | 3.3 V/2.5 V tolerant |
| Timing Control | Programmable transmit and receive delays |
| Auto-Negotiation | Automatic selection of the highest supported link-up speed |
| Cable Diagnostics | Micrel LinkMD TDR-based faulty-copper-cable identification |
| Test Features | Remote and local loopback for analog and digital path verification |
| Boîtier | 48-pin QFN, 7 x 7 mm |
| Package Family | QFN surface-mount family |
| Température de fonctionnement | 0°C to +70°C |
| Lead-Free Status | Lead-free package |
| Statut RoHS | RoHS compliant |
| Type de montage | Surface mount |
| Internal Register Interface | Extended registers |
| Unit Price | $6.5948 at LCSC as of 2026-10-22 |
Guide de configuration des broches du KSZ9021RN qfn surface-mount family
Configuration des broches du KSZ9021RN (boîtier qfn surface-mount family). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour KSZ9021RN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
KSZ9021RN convient pour 6 applications: Industrial Ethernet Controller Interface, Gigabit Network Switch Port, Networked Camera and Security Equipment, Embedded Linux Gateway, Test and Measurement Ethernet Instrument, Router and Gateway Equipment.
Industrial Ethernet Controller Interface
The KSZ9021RN fits a 1 Gbit copper-Ethernet port when the host controller uses RGMII. Its 10/100/1000 Mbps support and automatic link-speed negotiation allow the same physical layer to serve legacy 100 Mb/s links and Gigabit connections. Programmable transmit and receive delays provide adjustment for controller-to-PHY timing differences, while LinkMD TDR diagnostics help identify faulty cabling. The 0°C to +70°C range makes it best suited to controlled indoor equipment unless the surrounding system has separate environmental qualification.
Recommandé
Gigabit Network Switch Port
KSZ9021RN can provide the copper physical layer for a 1 Gbit switch port connected through an RGMII-based switching controller. IEEE 802.3 support, auto-negotiation, and 3.3 V operation align with conventional network-port architectures, while configurable delays help tune edge timing at the board level. Careful separation between PHY and magnetics, short high-speed traces, and verified thermal management of the 48-QFN exposed pad are essential for stable 1 Gbit operation.
Recommandé
Networked Camera and Security Equipment
KSZ9021RN supports the physical layer for IP cameras and surveillance equipment that need a reliable 10/100/1000 Mbps copper connection. Auto-negotiation accommodates different switch-port speeds, and loopback functions assist production verification of analog and digital paths. Cable diagnostics can narrow failures to interconnect problems, reducing board-level troubleshooting time. Designers should pair the PHY with suitable network magnetics, controlled-impedance routing, grounding, and surge-protection components appropriate to the installation environment.
Recommandé
Embedded Linux Gateway
A KSZ9021RN-based port suits embedded Linux gateways requiring a conventional Gigabit Ethernet MAC connection rather than a hardwired protocol controller. The RGMII interface offers a standardized high-speed host path, and programmable delays provide an extra variable for board timing optimization. Deployment quality depends on correct strap and register setup, validated magnetics selection, stable 3.3 V supply, Linux driver support, and preproduction testing across 10, 100, and 1000 Mb/s links and cable lengths.
Recommandé
Test and Measurement Ethernet Instrument
KSZ9021RN is applicable to bench instruments that communicate over standard copper Ethernet at 10, 100, or 1000 Mbps. Its remote and local loopback modes support verification of transmit, receive, analog, and digital paths during production. LinkMD TDR diagnostics can help distinguish cabling faults from board failures, shortening test time. For laboratory equipment, designers should still verify low-EMI behavior, isolation requirements, enclosure grounding, and long-term cable compatibility under the intended environmental conditions.
Recommandé
Router and Gateway Equipment
KSZ9021RN can implement a high-speed WAN or LAN copper port in a router or gateway with an RGMII controller. IEEE 802.3 operation, auto-negotiation, and 1 Gbit support fit contemporary network equipment, while programmable path delays reduce sensitivity to board-level timing differences. Production design should include verified magnetics, controlled-impedance layout, robust thermal coupling under the QFN exposed pad, and automated link tests at all supported rates before environmental qualification.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour KSZ9021RN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Notes de conception
Follow the exact KSZ9021RN 48-QFN footprint and exposed-pad instructions in the manufacturer datasheet; no pin table or pad geometry was included in the verified excerpts, so these details were not inferred. Keep RGMII traces short and continuous, maintain a solid ground reference beneath high-speed nets, avoid stubs, and place PHY support components close to their associated pins. Validate the final layer stack and timing with the intended magnetics and controller rather than copying a generic Ethernet layout.
Use the KSZ9021RN programmable transmit and receive delays as board-level compensation, not as permission for uncontrolled routing. Establish nominal MAC-to-PHY timing first, characterize the assembled PCB and magnetics, then adjust delays with margin at 10 and 100 Mb/s as well as 1 Gb/s. Source-end, device, and channel timing must be evaluated together because a setting that works on one board or controller may fail after component, temperature, or cable changes.
Do not treat KSZ9021RL, KSZ9021GN, KSZ9021GQ, or KSZ9031RNX as drop-in alternatives merely because they belong to related Ethernet families. The former parts use different package pin counts and footprints, while Microchip documents a different register-access architecture for KSZ9031RNX. Confirm the exact 48-QFN ordering code, programming procedure, operating-temperature range, and PCB revision before substituting any MPN.
Informations de conformité
The verified Microchip datasheet result describes the KSZ9021 family packaging as RoHS compliant and identifies the RL, GN, and GQ package options as lead-free; the RN is described as the 48-pin QFN ordering option. No exact RN declaration for REACH, halogen-free status, conflict minerals, or automotive qualification was supplied.
