LC4064V-75T44I - 64-Macro 168MHz CPLD | Lattice Semiconductor
Référence : LC4064V-75T44I ✓ ActifLC4064V-75T44I Présentation
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple programmable logic blocks, programmable interconnect, and I/O resources into one integrated logic solution. In the broader semiconductor hierarchy, a CPLD occupies the position between discrete gate logic and more complex programmable devices such as FPGAs. It is generally used when a design requires rapid configuration, deterministic combinational and registered logic, and a compact implementation without loading a large FPGA design.
The LC4064V-75T44I provides 64 macro cells in its ispMACH 4000V family. The architecture combines characteristics associated with Lattice ispLSI 2000 and ispMACH 4A devices. Its SuperFAST designation reflects the family's emphasis on high-speed programmable logic, while the -75 speed grade corresponds to the 168 MHz operating-frequency listing. In-system programmability allows a board designer to configure the CPLD through the programming interface rather than relying on a mask-programmed device.
The 44-pin TQFP construction provides a compact surface-mount platform with 0.8 mm pitch and 30 user I/O according to the device listing. Supporting 3.3 V, 2.5 V, and 1.8 V operation gives designers flexibility across mixed-voltage systems. The broad -40°C to +105°C industrial range supports industrial automation, communications equipment, embedded control, and test systems where commercial-temperature variants would be insufficient.
Typical applications include peripheral interfacing, bus decoding, state-machine control, signal conditioning, data-format conversion, and glue logic for industrial or communications systems. The LC4064V-75T44I is particularly suitable when the required logic fits within 64 macro cells but needs a faster timing target than conventional low-density PLD families. It can also consolidate several discrete logic functions into one programmable package.
PCB design should preserve a clean programming interface, route clock and high-speed nets with controlled impedance where required, and decouple each applicable supply rail close to the device. The TQFP package requires careful lead inspection after soldering because its fine 0.8 mm pitch can complicate visual inspection. Confirm the pinout and power configuration against the manufacturer datasheet before finalizing the board layout.
This product page organizes the device's principal specifications, verified sourcing information, package details, and drop-in alternatives for faster engineering evaluation. It also highlights replacement constraints and application-specific considerations that help teams assess the LC4064V-75T44I before committing to a PCB or production program.
Alternatives de remplacement direct pour LC4064V-75T44I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LC4064V-75T44I (même facteur de forme et même empreinte) — différant par Product Family, Package, Architecture, Core Supply Voltage, Supported Supply Voltages.
LC4064V-75T44C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LC4064V-75TN44I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LC4064C-75T44I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LC4064V-75T44I Valeurs maximales et caractéristiques électriques
| Device Type | Complex programmable logic device (CPLD) |
| Product Family | ispMACH 4000V |
| Macro Cells | 64 macro cells |
| Maximum System Frequency | 168 MHz |
| Speed Grade | -75 |
| Supported Supply Voltages | 3.3 V, 2.5 V, and 1.8 V |
| Programming Type | In-system programmable |
| User I/O | 30 I/O |
| Boîtier | 44-pin TQFP |
| Package Body Size | 10 mm × 10 mm |
| Lead Pitch | 0.8 mm |
| Type de montage | Surface mount |
| Température de fonctionnement | -40°C to +105°C |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Performance Class | SuperFAST |
Guide de configuration des broches du LC4064V-75T44I 10 mm × 10 mm
Configuration des broches du LC4064V-75T44I (boîtier 10 mm × 10 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LC4064V-75T44I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LC4064V-75T44I convient pour 6 applications: Industrial Peripheral Interfacing, Communications Protocol Conversion, Automotive Test Equipment, Data Acquisition Conditioning, Embedded System Control, Test and Measurement Control.
Industrial Peripheral Interfacing
The LC4064V-75T44I fits industrial peripheral-interface logic that requires programmable state machines, bus decoding, and signal conditioning without a large FPGA. Its 64 macro cells and 30 user I/O provide a practical capacity for combining several fixed-format interfaces into one device, while the 168 MHz maximum system frequency supports timing-critical control paths. The -40°C to +105°C operating range suits factory equipment where commercial-temperature logic would be marginal. Place the CPLD near the connected interface devices, keep clock routing short, and follow the manufacturer power and decoupling recommendations for each implemented voltage configuration.
Recommandé
Communications Protocol Conversion
The LC4064V-75T44I can implement protocol conversion, framing, command decoding, and data-routing logic for communications equipment. The ispMACH 4000V family combines an ispLSI 2000-style macro-cell architecture with ispMACH 4A characteristics, providing a compact platform for deterministic logic that does not justify a high-capacity FPGA. A maximum system frequency of 168 MHz allows design headroom for registered datapaths, while 30 user I/O can connect parallel buses or control interfaces. Engineers should establish timing budgets against the selected I/O standard and use the manufacturer datasheet for pin assignment and timing validation.
Recommandé
Automotive Test Equipment
The LC4064V-75T44I is appropriate for industrial or vehicle test equipment requiring programmable sequencing, fixture control, and signal adaptation. Its 64 macro cells can organize counters, comparators, state machines, and interface logic while the 168 MHz timing class supports high-speed test-control paths. The 30 user I/O provide connections to programmable sources, measurement handshakes, and fixture control signals. Because the device is not identified as AEC-Q100 qualified, it should not be installed in an automotive safety-critical location without separate qualification and manufacturer approval.
Recommandé
Data Acquisition Conditioning
The LC4064V-75T44I can implement data-acquisition conditioning functions such as channel selection, trigger coordination, counter logic, and format conversion. Its 64 macro cells and 168 MHz maximum system frequency accommodate deterministic control logic around external converters or sensors, while 30 user I/O supports parallel data capture and handshake signals. The -40°C to +105°C range is useful in industrial measurement systems. The CPLD should not replace analog front-end conditioning, but it can coordinate digital channels and reduce discrete glue logic. Validate setup and hold timing at the target acquisition rate against the manufacturer timing tables.
Recommandé
Embedded System Control
The LC4064V-75T44I is well suited to embedded control logic that coordinates sensors, memory-mapped peripherals, and actuator drivers. Its in-system programmability allows configuration during board bring-up or field updates, while the compact 44-pin TQFP package supports space-constrained assemblies. The 168 MHz timing class and 30 user I/O make the device useful for command sequencing, interrupt arbitration, watchdog coordination, and custom peripheral bridges. Designers should separate clock-sensitive routes from switching nodes, provide the documented programming access, and verify every supply connection and decoupling capacitor in the final schematic.
Recommandé
Test and Measurement Control
The LC4064V-75T44I can consolidate control logic for automated test and measurement equipment, including sequencer commands, relay-control timing, status multiplexing, and data capture coordination. Its 64 macro cells allow multiple small control functions to be implemented in one programmable device, and its 168 MHz maximum system frequency leaves margin for synchronous test-control paths. The industrial temperature range supports use in controlled but thermally variable laboratory and production environments. Use the manufacturer pinout to preserve programming access, apply controlled impedance where clocks are routed, and validate timing margins for the instrumentation interfaces.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LC4064V-75T44I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LC4064V-75T44C | LC4064V-75TN44I | LC4064C-75T44I |
|---|---|---|---|---|
| Package | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Product Family | ispMACH 4000V | ispMACH 4000V | ispMACH 4000V | ispMACH 4000C |
| Macro Cells | 64 macro cells | 64 macro cells | 64 macro cells | 64 macro cells |
| User I/O | 30 I/O | 30 I/O | 30 I/O | 30 I/O |
| Operating Temperature | -40°C to +105°C | 0°C to +90°C | -40°C to +105°C | -40°C to +105°C |
| Programming Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Lead Pitch | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
Principaux différenciateurs
- Industrial-temperature operation (vs LC4064V-75T44C)
- SuperFAST 168 MHz system-frequency class (vs LC4064C-75T44I)
- High logic density in a compact package (vs LC4064C-75T44I)
Notes de conception
Route the programming interface, clock inputs, and high-speed outputs with signal-integrity discipline. Keep the device's supply and ground connections close to the package, use short return paths, and place bypass capacitors near the relevant power pins. The 44-pin TQFP uses a 0.8 mm pitch, so track width, spacing, solder-mask clearance, and assembly capability should be reviewed before release.
Treat the 168 MHz maximum system frequency as a device capability rather than an unconditional system target. Derive the actual timing budget from the selected I/O standard, external load, board topology, and selected speed grade. Use the manufacturer timing tables to verify setup, hold, and clock requirements, and avoid unnecessary stubs or long parallel routes that could degrade edge quality.
Do not treat a shared TQFP-44 footprint as proof that every 64-macro-cell device is interchangeable. Confirm the exact family, speed grade, temperature grade, supply configuration, I/O standards, and configuration behavior before substituting a related ordering code. In particular, LC4064C-75T44I belongs to the 4000C family and should pass a complete timing and electrical review before replacing the 4000V target.
The published 168 MHz figure describes logic performance and is not a thermal rating. Check the manufacturer's recommended operating conditions and package information against the actual board temperature, switching activity, and supply configuration. Use adequate copper area and a board environment appropriate for the -40°C to +105°C industrial range, and evaluate the assembled junction temperature when the CPLD drives multiple external interfaces.
Informations de conformité
The device is an industrial-temperature ispMACH 4000V CPLD, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code.