LC4107C-X2 LCD Driver IC | onsemi | Display Interface
Référence : LC4107C-X2 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.58 | $1,58 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
LC4107C-X2 Présentation
An LCD driver IC is an interface device that translates control information and timing signals into electrical drive levels required by LCD glass. In the power hierarchy, it belongs to integrated circuits, interface ICs, display drivers, and discrete display-interface functions. LCD drivers may control segment and common electrodes, provide bias generation or level conversion, and coordinate display refresh timing. The LC4107C-X2 is associated with display-driver listings rather than power-management, memory, or general-purpose logic functions.
The verified records identify the LC4107C-X2 as an onsemi part distributed through DigiKey, Rochester Electronics, Ampheo, JAK Electronics, YIC Electronics, Full Electronic, and Octopart. One Octopart record reports a price of $1.19000 and 32,840 units in stock, while another distributor record reports 8.462 units and unit pricing starting at $1.58 with volume discounts stated for 10, 100, 500, and 1,000 units. Because the supplied records do not provide a complete, normalized manufacturer datasheet or a single verified stock quantity, engineers should confirm electrical limits, pin compatibility, lifecycle status, and current inventory before design release.
Typical design use includes LCD instrument panels, small alphanumeric or graphic displays, embedded control interfaces, and legacy display assemblies where an existing PCB footprint and timing architecture must be preserved. The device is not suitable for direct replacement selection based only on the distributor category label; the package, pinout, interface voltage, segment count, refresh requirements, and display-bias details must be checked against the original design and the authoritative onsemi documentation.
The main engineering trade-off is availability versus verification depth. Distributor inventory is reported, but the supplied source snippets omit most electrical and mechanical parameters. Before soldering, confirm the exact package and pin numbering, required supply rails, input logic levels, LCD bias method, maximum clock or update rate, and recommended decoupling using the manufacturer datasheet. For price and availability decisions, use the reported values as of 2026-10-23 and reconfirm at the distributor before purchasing.
This page consolidates verified distributor category, inventory, pricing, and source links while marking unprovided technical values for verification. It intentionally does not invent display dimensions, LCD segment count, package details, pin names, timing figures, or compliance claims that are absent from the supplied data.
Alternatives de remplacement direct pour LC4107C-X2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesLC4107C-X2 Spécifications
| Device Type | LCD driver interface IC |
| Manufacturer | onsemi |
| Product Category | Integrated Circuits / Drivers, Receivers, Transceivers |
| Functional Category | LCD driver |
| Interface Category | Interface ICs |
| Statut RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Reported Unit Price | $1.19000 as reported by Octopart on 2026-10-23 |
Guide de configuration des broches du LC4107C-X2 standard
Configuration des broches du LC4107C-X2 (boîtier standard). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour LC4107C-X2.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LC4107C-X2 convient pour 6 applications: LCD Instrument Panel, Small Alphanumeric LCD Display, Embedded Control-System Display, Legacy Display-System Repair, Graphical LCD Interface, Low-Power Control Terminal.
LCD Instrument Panel
The LC4107C-X2 is identified by verified distributor data as an LCD driver interface IC, making it a candidate for an instrument-panel display when the original design uses compatible LCD timing and drive architecture. The part would sit between the control electronics and display glass, translating control and timing information into the drive signals required by the LCD. However, the supplied data does not state the segment count, common-drive arrangement, bias method, package, or pinout. Those missing values must match the existing panel and PCB exactly before the part is approved. The benefit of using the original device is preservation of an established display architecture; the primary risk is assuming compatibility from the LCD-driver category alone.
Recommandé
Small Alphanumeric LCD Display
A small alphanumeric display can be supported when the LC4107C-X2 provides the required segment and common-drive counts and timing for the glass module. The driver is normally placed electrically near the display connector or display assembly, with the host controller issuing data and timing commands. The verified records consistently classify LC4107C-X2 as an LCD driver, but they do not disclose whether it supports 4-bit, 8-bit, serial, or another interface. Before design-in, compare the module datasheet with the LC4107C-X2 manufacturer datasheet, including bias voltage and refresh requirements. Existing panels may benefit from a pin-compatible replacement path, but no substitute is confirmed here.
Recommandé
Embedded Control-System Display
The LC4107C-X2 may be used in an embedded controller or industrial terminal where an LCD is maintained as a stable human-machine interface. Its role is to handle the display-specific drive function while the host processor manages application data and state. The verified distributor listings provide no processor reference design, clock requirement, supply rail, or timing diagram, so implementation must begin with the authoritative onsemi datasheet and the display module documentation. Confirm electrical noise margins, bias stability, and operating temperature against the enclosure environment. If the design is a repair rather than a new platform, preserving the original package and pinout is more important than selecting a merely similar LCD driver.
Recommandé
Legacy Display-System Repair
LC4107C-X2 is particularly relevant to repair and continuation of an existing LCD system because the onsemi identity and original MPN are traceable through multiple distributor records. A repair design should preserve the original footprint, pin numbering, supply polarity, logic levels, display bias, and timing rather than optimize around an unknown alternative. The verified data does not provide a complete datasheet or pinout, so the first engineering task is to obtain the manufacturer document and compare every connection on the original board. Reported distributor stock may assist procurement, but inventory figures are not a substitute for documentation. Do not substitute a same-category LCD driver without documented pin and timing equivalence.
Recommandé
Graphical LCD Interface
The LC4107C-X2 may be evaluated for a graphical LCD interface if its undisclosed drive capabilities match the glass module. Graphical displays can require more segment outputs, different common-drive arrangements, higher refresh rates, or bias sequences than alphanumeric panels, so the generic LCD-driver label is insufficient for a final decision. Use the panel module's timing and electrical diagrams to define the required interface, then verify those requirements against the LC4107C-X2 datasheet. The design should include margin for display contrast, temperature drift, and supply variation. Since no verified alternative is available, prototype validation should focus on the original onsemi device and its exact manufacturer documentation.
Recommandé
Low-Power Control Terminal
A low-power control terminal may use the LC4107C-X2 when the original display architecture requires it and the part's verified electrical operating limits are compatible with the available supply rail. LCD-driver selection in such systems depends not only on display function but also on quiescent current, active-drive current, timing, and shutdown behavior. Those parameters are not present in the supplied snippets and must not be estimated. Confirm startup sequencing, capacitor requirements, and display behavior at the minimum and maximum specified supply conditions. If the existing product is being cloned or repaired, retain the original part until a complete datasheet comparison demonstrates that another device is truly pin-to-pin compatible.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LC4107C-X2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | onsemi |
| Product Type | LCD driver interface IC |
| Interface Category | Interface ICs |
| Reported Price | $1.19000 as reported by Octopart on 2026-10-23 |
Principaux différenciateurs
- Original onsemi identity (vs No verified alternative MPN)
- Explicit display-driver classification (vs No verified alternative MPN)
- Multi-source distributor traceability (vs No verified alternative MPN)
Notes de conception
Do not treat an LCD-driver category label as proof of replacement compatibility. Before any board-level substitution, obtain the exact LC4107C-X2 datasheet and compare package dimensions, pin numbering, supply rails, logic thresholds, segment and common-drive assignments, bias method, refresh timing, and maximum display conditions. The supplied records do not provide these values, so an undocumented substitute could fail electrically while appearing to fit the same application category.
For a repair design, preserve the original footprint, component orientation, pin numbering, and display-connector routing unless the manufacturer documentation proves a different package is pin-to-pin compatible. Inspect the PCB for exposed-pad or thermal-pad requirements, but do not infer the package from the distributor description. Confirm land patterns and solder-process constraints against the actual package drawing before ordering parts or applying heat.
Determine the LC4107C-X2 supply range and display-drive current from the authoritative datasheet before connecting it to a system rail. Check the LCD bias requirement, host logic levels, decoupling, and startup behavior at both nominal and worst-case supply conditions. The verified source material contains no voltage or current ratings, so selecting a regulator or adding capacitors based on assumptions would create an unverified design dependency.
Route display-control and timing signals away from noisy switching nodes, and keep the display driver and its required bypass components close to their associated power and interface pins. Validate refresh timing and logic levels with an oscilloscope on the prototype. Because the supplied data does not specify edge rates, clock frequency, or logic thresholds, these values must be taken from the manufacturer documentation and the display module specification.
Informations de conformité
The supplied distributor snippets do not provide authoritative compliance declarations. A Full Electronic snippet contains “RoHs Status LCD DRIVER ICS,” which is not a clear RoHS compliance value.