LM2900D - Quad Norton Operational Amplifier | Texas Instruments
Référence : LM2900D ✓ ActifLM2900D Présentation
A Norton operational amplifier is a current-buffer input operational-amplifier architecture. It differs from the more common voltage-input differential pair by using a translinear input stage that offers low input bias current and good performance with high-impedance sources. This places the LM2900D in the operational-amplifier hierarchy: operational amplifier, amplifier IC, analog IC, and semiconductor. The part is intended for general-purpose analog signal conditioning rather than precision instrumentation or automotive-qualified systems.
According to the Texas Instruments LM2900 product page, the LM2900 family consists of four independent, high-gain frequency-compensated Norton operational amplifiers designed to operate from a single supply over a wide range of voltages. The product description also identifies large output-voltage swing, output short-circuit protection, internal frequency compensation, and low input bias current as important characteristics. These features make the device suitable for buffering, voltage amplification, signal conditioning, and general feedback-control circuits.
The LM2900D can be used with a single positive supply or with split supplies. In single-supply designs, the input and output signal levels must remain within the amplifier's common-mode and output-swing limits. The LM2900 family is internally frequency compensated, so the feedback network establishes the closed-loop gain without requiring a separate compensation capacitor in ordinary applications. The 14-pin SOIC package provides a conventional surface-mount footprint and a practical temperature range for industrial and consumer equipment.
Typical uses include transducer-signal conditioning, sensor interfaces, audio preamplification, low-current feedback amplifiers, and general analog control loops. Because the verified data does not provide detailed electrical limits, bandwidth, noise, slew rate, or exact input/output range, those parameters should be confirmed in the manufacturer datasheet before final design release. The verified distributor listings show current purchasing channels, but they do not provide a reliable standardized price table in the supplied data.
This page combines the verified manufacturer and distributor identity for LM2900D with package information, sourcing links, comparison structure, and practical selection guidance. It is intended to help engineers identify the correct 14-SOIC Norton amplifier while avoiding unsupported parameter assumptions. Confirm the latest ordering information, electrical limits, lead time, and lifecycle status with Texas Instruments or an authorized distributor before production commitment.
Alternatives de remplacement direct pour LM2900D — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
LM2900DRE4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LM2900DG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LM2900D Valeurs maximales et caractéristiques électriques
| Product Type | Quad operational amplifier |
| Amplifier Architecture | Norton current-buffer operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| Supply Configuration | Single supply or split supply |
| Boîtier | 14-pin SOIC (D) |
| Type de montage | Surface mount |
| Frequency Compensation | Internal |
| Output Short-Circuit Protection | Yes |
| Input Bias Current | Low input bias current |
| Output Voltage Swing | Large output voltage swing |
Guide de configuration des broches du LM2900D 14-pin soic (d)
Configuration des broches du LM2900D (boîtier 14-pin soic (d)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour LM2900D.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LM2900D convient pour 6 applications: High-Impedance Sensor Signal Conditioning, Single-Supply Analog Control Loops, Audio Preamplification and Buffering, Active Filter and Equalization Circuits, Transducer Interface and Instrumentation, Power Supply and Feedback Control.
High-Impedance Sensor Signal Conditioning
LM2900D is appropriate for conditioning signals from high-impedance sensors because the Norton input stage is specifically associated with low input bias current. The amplifier can provide gain and buffering around a resistive feedback network without adding a large input-current burden to the source. Its internally compensated architecture is useful when the design requires a straightforward feedback amplifier rather than a separately compensated gain stage. Verify the exact input bias current, offset, common-mode range, and output-swing limits from the current datasheet before setting the source impedance and feedback values.
Recommandé
Single-Supply Analog Control Loops
The LM2900D can operate from a single supply and is therefore useful in control loops where a negative supply would otherwise add board area and cost. Its four independent amplifier sections allow several related functions to share one package, such as an error amplifier, active filter, and signal buffer. The large output-voltage swing and short-circuit protection support practical industrial and instrumentation circuits, although the usable output range is not specified in the supplied data. Confirm the minimum supply voltage, rail-to-rail behavior, and stable feedback-network values in the manufacturer datasheet.
Recommandé
Audio Preamplification and Buffering
LM2900D can serve as a general-purpose preamplifier or buffer when low input bias current is useful with the source impedance. The internal frequency compensation makes the device straightforward to use in conventional inverting and non-inverting feedback configurations. Because the verified material does not provide the LM2900D noise density, distortion, slew rate, or bandwidth figures, it should not be treated as a low-noise precision audio amplifier without review of the full datasheet. Include input and output filtering appropriate to the source and load, and check output swing at the selected supply voltage.
Recommandé
Active Filter and Equalization Circuits
The four amplifier sections of LM2900D can implement cascaded or parallel active-filter stages, equalizers, or impedance-conversion networks. The high-gain Norton architecture and internal compensation make the device suitable for classic general-purpose analog signal-conditioning blocks where external compensation is not required. Stable filter results depend on the exact gain-bandwidth, slew-rate, and gain-error limits, none of which are quantified in the verified excerpt. Simulate tolerances and verify the manufacturer's recommended feedback values before production, especially for high-Q sections.
Recommandé
Transducer Interface and Instrumentation
LM2900D is suited to generic transducer-interface circuits where a high-impedance detector must drive a longer cable or feed a measurement amplifier. Its low-bias-current Norton input reduces loading of the sensor, while the quad configuration can support gain, filtering, and output buffering stages in one package. The supplied data does not identify an automotive grade, precision offset, or extended-temperature status, so industrial instrumentation requirements must be checked against the exact ordering information. Input protection and grounding are important because the device's absolute maximum ratings are not included in the verified excerpt.
Recommandé
Power Supply and Feedback Control
LM2900D can be used in simple regulator or supply-feedback circuits where the design needs an amplifier with low input bias current and flexible single- or split-supply operation. Its short-circuit protection provides a degree of output robustness, while the wide supply range stated for the LM2900 family supports adaptation across nominal rails. Designers must still verify maximum supply voltage, output current capability, saturation behavior, and stability with the chosen compensation and load. The four independent sections can also implement soft-start, error amplification, and monitoring functions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LM2900D — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LM2900DRE4 | LM2900DG4 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SOIC-14 (D) | SOIC-14 (D) | SOIC-14 (D) |
Principaux différenciateurs
- Low-bias-current Norton input architecture (vs LM324D)
- Four amplifiers in one verified 14-SOIC package (vs LM2900DRE4)
- Internal compensation and short-circuit protection (vs LM2900DG4)
Notes de conception
Do not treat every LM2900 family suffix as automatically interchangeable. The supplied cross-reference results mention LM2900DRE4 and LM2900DG4, but the verified data does not provide their complete pinout, qualification, or parameter tables. Before replacing LM2900D, compare the 14-pin SOIC pin functions, supply limits, common-mode range, output swing, compensation method, and temperature grade in the manufacturer documentation.
The supplied material confirms single-supply and split-supply operation but does not provide the minimum and maximum supply voltages or current consumption. Do not select the supply rail from general assumptions. Verify absolute maximum and recommended operating limits from the LM2900 datasheet, then confirm that the source, feedback network, and load remain inside the input and output common-mode limits. This prevents the classic single-supply mistake of assuming rail-to-rail input or output operation.
Place the amplifier input and feedback components close to the relevant SOIC pins to minimize parasitic capacitance and susceptibility to noise pickup. Keep sensitive high-impedance input nets short, use a quiet ground reference, and provide local supply bypassing where the system power layout permits it. Because the verified excerpt does not specify stability recommendations or bypass values, use the layout and capacitor guidance in the current TI datasheet rather than generic assumptions.
The Norton input stage is attractive for high-impedance sources, but its practical benefit depends on the complete source impedance, cable capacitance, and bias current. Estimate the input-current error using the selected bias-current limit and source resistance, and confirm that the resulting offset is acceptable. Do not substitute standard input-voltage values from a conventional voltage-input operational amplifier when checking LM2900D behavior.
Informations de conformité
The supplied verified product and distributor snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These values remain unknown rather than being assumed from the manufacturer or package family.