LT1125CJ - Quad Precision Op Amp | Analog Devices | Instrumentation
Référence : LT1125CJ ✓ ActifLT1125CJ Présentation
An operational amplifier, commonly called an op amp, is an active semiconductor component that uses high gain and negative feedback to amplify small voltage differences. It belongs to the amplifier IC hierarchy, where precision operational amplifiers are selected when signal fidelity, offset behavior, bias-current characteristics, and open-loop performance matter more than the lowest possible cost or smallest footprint.
The LT1125 uses a four-channel architecture, with the “quad” configuration providing four amplifier sections in one package. Its operating class is described by Analog Devices as low noise, high speed, and precision. These characteristics make it suitable for low-level sensor conditioning, instrumentation amplification stages, and analog signal chains in which multiple channels must be handled consistently. The C suffix identifies the commercial temperature-grade family, while the J suffix denotes the through-hole ceramic dual-inline package used by LT1125CJ.
The manufacturer describes the LT1125 as offering higher gain, slew rate, and bandwidth than the industry-standard OP-27 and competing OP-470 families. These comparisons are relevant when upgrading an existing precision-amplifier design, but the actual signal bandwidth, noise density, input offset voltage, input bias current, input voltage range, and output swing must be checked against the system requirements before replacing another amplifier.
Typical uses include four-channel instrumentation front ends, low-level transducer signal conditioning, precision measurement systems, laboratory interfaces, and factory test equipment. The LT1125CJ is particularly appropriate when a through-hole ceramic package is preferred, four amplifier channels are required, and the design benefits from the family’s stated low-noise, high-speed, and precision characteristics. It can also simplify assembly by reducing the number of amplifier packages on a board.
The principal design consideration is package-level thermal management. A 14-pin CERDIP offers a larger thermal path and more forgiving assembly characteristics than a small surface-mount package, but it consumes substantially more board area. Confirm pin orientation, supply requirements, input common-mode range, output swing, stability requirements, and decoupling directly from the manufacturer datasheet before laying out the PCB.
This product record combines the exact ordering information, package details, family positioning, manufacturer product information, and replacement-search results into an engineering-oriented reference. It also highlights where a genuinely pin-compatible replacement must be qualified rather than assuming that a similar amplifier has the same pinout, supply behavior, or precision performance.
Alternatives de remplacement direct pour LT1125CJ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesLT1125CJ Valeurs maximales et caractéristiques électriques
| Product Type | Quad precision operational amplifier |
| Number of Amplifier Channels | 4 circuits |
| Noise Classification | Low noise |
| Speed Classification | High speed |
| Precision Class | Precision operational amplifier |
| Package Type | 14-pin CERDIP |
| Package Family | Ceramic dual inline package |
| Type de montage | Through-hole |
| Number of Terminals | 14 terminals |
| Temperature Grade | Commercial |
| Device Status | Production |
Guide de configuration des broches du LT1125CJ ceramic dual inline package
Configuration des broches du LT1125CJ (boîtier ceramic dual inline package). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour LT1125CJ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LT1125CJ convient pour 6 applications: Four-Channel Instrumentation Signal Conditioning, Low-Level Transducer Amplification, Precision Data-Acquisition Front End, Laboratory Measurement Equipment, Factory Test and Calibration Systems, Precision Analog Signal Chains.
Four-Channel Instrumentation Signal Conditioning
The LT1125CJ is well suited to instrumentation designs that must amplify several low-level sensor outputs through four precision amplifier channels in one 14-pin CERDIP. The LT1125 family is identified by Analog Devices as low noise, high speed, and precision, and it offers higher gain, slew rate, and bandwidth than the industry-standard OP-27 family. Use each channel for a corresponding input stage or for cascaded gain sections, then verify input offset voltage, input bias current, noise density, common-mode range, and output swing against the sensor and ADC interface. The four-channel package reduces component count, but its through-hole ceramic footprint occupies more PCB area than a surface-mount quad. Decoupling and grounding remain important because precision gain stages can magnify offset, noise, and layout-induced errors.
Recommandé
Low-Level Transducer Amplification
The LT1125CJ can support low-level transducer amplification when the circuit needs several precision voltage-amplifier sections and the LT1125’s low-noise, high-speed positioning is appropriate. Four channels can serve resistive, capacitive, or voltage-output sensors, provided the source impedance and signal bandwidth remain compatible with the amplifier’s input characteristics. The family’s stated gain, slew-rate, and bandwidth advantages over OP-27 devices can help preserve large-signal and small-signal fidelity in measurement chains. Because the available ordering information does not expose exact offset, bias-current, noise-density, or common-mode limits, the final stage design should use the manufacturer datasheet. In practice, use short guard techniques, low-leakage junctions, clean reference grounding, and power-supply bypass close to the package to prevent the precision amplifier from exposing unwanted sensor-level errors.
Recommandé
Precision Data-Acquisition Front End
The LT1125CJ can form the analog front end of a multichannel data-acquisition system when four independent precision amplifier paths are needed. Its quad arrangement is useful for conditioning sensor outputs before multiplexers, filters, or analog-to-digital converters, while the LT1125 family’s high-speed and low-noise characterization supports instrumentation-oriented signal chains. Confirm that each amplifier’s settling behavior, slew rate, and output swing meet the acquisition bandwidth and sample-rate requirement. Place power bypass capacitors close to the supply pins and route sensitive inputs away from switching nodes and digital return currents. If the system requires a smaller footprint, a surface-mount quad amplifier may be preferable, but the LT1125CJ provides a straightforward through-hole ceramic implementation with four channels in one package.
Recommandé
Laboratory Measurement Equipment
The LT1125CJ is appropriate for laboratory measurement equipment that combines four precision analog channels with a traditional through-hole construction. Possible signal paths include conditioning a reference measurement, buffered sensor output, amplifier-output monitor, and calibration signal within one instrument. The LT1125’s stated combination of low noise, high speed, and precision, together with higher gain, slew rate, and bandwidth than OP-27 devices, makes it a candidate for compact precision analog sections. Engineer the circuit for the complete input and output ranges rather than relying on nominal amplifier labels. Verify common-mode limits, output capability, stability with the selected feedback network, and temperature behavior under worst-case instrument conditions. The 14-pin CERDIP is mechanically robust and easy to inspect, while its larger footprint may affect the density of a compact laboratory instrument.
Recommandé
Factory Test and Calibration Systems
The LT1125CJ can support factory test and calibration systems that need multiple buffered or amplified reference and DUT channels. Four amplifier sections in a single 14-pin CERDIP can simplify board population while providing the low-noise, high-speed, precision positioning of the LT1125 family. Each channel may condition a different test point, amplify a low-level reference, or buffer an output from a switching fixture. The final design should verify amplifier settling at the test-system bandwidth and confirm that the output range covers every programmed excitation. Use clean, independent return paths for sensitive channels and place bypass capacitors at the device supply pins. For very high channel counts, a multiplexed architecture or multiple quad packages may be easier to route and troubleshoot than a single high-density through-hole board.
Recommandé
Precision Analog Signal Chains
The LT1125CJ fits precision analog signal chains where four channels must preserve small signals while operating at higher speed than an OP-27-class amplifier. It can be considered for buffered filters, programmable-gain stages, control-loop interface amplifiers, or sequential channel-conditioning blocks, provided the selected gain and compensation produce stable operation. The manufacturer’s stated higher gain, slew rate, and bandwidth make the family attractive when signal-edge fidelity matters alongside low noise. Numeric design limits must be taken from the official family datasheet, particularly for common-mode range, output swing, noise, offset, bias current, and stability. The through-hole CERDIP package simplifies probing and repair in industrial equipment, but board area and input bias-current effects on high-impedance sources require careful evaluation before final component selection.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LT1125CJ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Analog Devices |
| Package | 14-pin CERDIP |
| Amplifier Channels | 4 circuits |
| Device Type | Quad precision operational amplifier |
| Mounting Type | Through-hole |
| Temperature Grade | Commercial |
| Noise Class | Low noise |
| Speed Class | High speed |
| Production Status | Production |
| Terminal Count | 14 terminals |
Principaux différenciateurs
- Four precision amplifier channels in one package (vs LT1124)
- Higher stated gain, slew rate, and bandwidth than OP-27 (vs OP-27)
- Four-channel through-hole integration (vs LT1125CZ)
Notes de conception
Design the PCB around the 14-pin CERDIP footprint and confirm pin numbering against the LT1124/LT1125 manufacturer package drawing before routing. Keep each power-supply bypass capacitor close to the associated device pins, use a low-impedance ground return for the four amplifier sections, and separate sensitive input traces from switching or high-current paths. Because this is a precision amplifier family, even small ground offsets can become significant errors when the closed-loop gain is high.
Do not treat the words precision, low noise, or high speed as complete electrical specifications. Check the manufacturer datasheet for input common-mode range, output swing, input offset voltage, input bias current, noise density, slew rate, gain-bandwidth product, and stability requirements at the intended supply voltage. Also confirm the C-grade operating-temperature limits before using the commercial-grade LT1125CJ in an industrial or automotive environment.
Use a quiet analog ground strategy and minimize copper-path resistance between the bypass network and the 14-pin package. For high-impedance sensors, account for input bias current and leakage from board contamination; guarding and clean board assembly can matter more than nominal amplifier noise. Keep test points and relay contacts away from sensitive inputs because contact resistance and leakage can create errors that resemble amplifier offset.
Informations de conformité
The product information identifies the C suffix as commercial grade, but it does not establish AEC-Q100 qualification or the requested environmental-compliance declarations.
