Analog Devices

LT1252CS8 - 100MHz Current-Feedback Video Amplifier | Analog Devices

Référence : LT1252CS8 ✓ Actif
±14 V (28 V total) Vdss 8-pin SOIC Package
MOQ : 1 |

LT1252CS8 Présentation

The Analog Devices LT1252CS8 is a single-channel, low-cost current-feedback video amplifier with a 100 MHz bandwidth, flat to 0.1 dB, and a wide ±14 V (28 V total) supply range. The device is offered in an 8-pin SOIC surface-mount package for low-impedance video-cable, RGB, composite-video, and active-filter applications. The LT1252 family is listed in production by Analog Devices.

A current-feedback amplifier is a voltage-feedback amplifier variant in which the inverting input and output are connected through a feedback impedance. This topology supports wide closed-loop bandwidth and high slew rate, making it useful when driving terminated cables, video distribution networks, and filters. It belongs to the operational-amplifier hierarchy, specifically the video-amplifier and low-cost video-buffer segment of analog signal-chain ICs.

The LT1252's major features include a 100 MHz bandwidth with 0.1 dB flatness, a wide ±14 V supply capability, and current-feedback operation suited to low-impedance loads. Its bandwidth is especially valuable for RGB signals routed between PCs and workstations, while its video-focused characteristics support composite-video distribution. The single-channel architecture also makes it appropriate for point-to-point video links where a quad amplifier would add unused channels.

Unlike a general-purpose voltage-feedback amplifier, the LT1252 uses current feedback to maintain high bandwidth across a broader range of feedback resistor values. This architecture is particularly effective in video gain stages where the signal source and load impedance require a high-output-current buffer. Engineers should nevertheless evaluate the complete gain network, including the feedback resistor and optional compensating capacitor, against the closed-loop gain and required stability margin.

Typical applications include composite-video line drivers, RGB video distribution, cable-driving buffers, active filters, and low-impedance video signal conditioning. The S8 package supports compact analog boards while providing separate supply and output pins for straightforward routing. When cascading several amplifiers, preserve video bandwidth and avoid operating near gain or output-swing limits that could distort synchronized signal transitions.

For reliable layouts, place input, feedback, and decoupling networks close to the associated device pins, and provide a low-impedance return path for each supply rail. A common design mistake is to copy a feedback value from a voltage-feedback amplifier without recalculating it for the LT1252 current-feedback topology. Validate the completed channel with the intended cable length and load because distributed capacitance and termination can alter bandwidth and output stability.

This page combines the manufacturer's device characteristics, verified distributor identification, drop-in replacement information, practical PCB guidance, and an application-oriented comparison. It is designed to help engineers identify whether the LT1252CS8 fits a video-buffer design before beginning detailed gain, feedback, and signal-integrity calculations.

Alternatives de remplacement direct pour LT1252CS8 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

LT1252CS8#PBF

✅ Remplacement direct
📦 8-pin SOIC
Lead-free finish suffix with 0% change to stated bandwidth, supply range, channel count, or package footprint

📋 Alternative de référence (hors catalogue)

LT1252CS8 Valeurs maximales et caractéristiques électriques

Amplifier Type Current-feedback video amplifier
Number of Channels 1 channel
Bandwidth 100 MHz
Flat Bandwidth 100 MHz at 0.1 dB
Supply Voltage Range ±14 V (28 V total)
Differential Gain Error ±0.1 dB
Differential Gain Phase ±0.09 degrees
Boîtier 8-pin SOIC
Type de montage Surface mount
Lead-Free Version Available as LT1252CS8#PBF
Statut RoHS Not established for LT1252CS8

Guide de configuration des broches du LT1252CS8 8-pin soic

Configuration des broches du LT1252CS8 (boîtier 8-pin soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 8-pin soic pour le LT1252CS8

Aucune donnée de brochage détaillée disponible pour LT1252CS8.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LT1252CS8 convient pour 6 applications: Composite Video Line Driver, RGB Video Distribution, Low-Impedance Cable Buffer, Active Video Filter, PC-to-Workstation Video Interface, Video Signal Conditioning.

📺

Composite Video Line Driver

The LT1252CS8 fits composite-video line driving because its current-feedback architecture is intended for low-impedance loads and its 100 MHz bandwidth remains flat to 0.1 dB. According to the Analog Devices manufacturer datasheet, the amplifier is designed for composite-video applications and can drive cables and filters. Place the amplifier close to the output connector, use the recommended feedback network, and provide a low-impedance ground return. The system designer should verify output swing into the intended termination and characterize distortion with the actual cable because distributed capacitance can affect stability and transient performance.

📺

RGB Video Distribution

The LT1252CS8 is suitable for RGB video distribution because its 100 MHz bandwidth is flat to 0.1 dB and its wide ±14 V supply range supports video signal amplitudes. According to the Analog Devices manufacturer datasheet, wide bandwidth and high slew capability simplify RGB routing between computers and workstations. Use separate amplifier channels for the red, green, and blue paths, keep feedback components close to the device, and match output routing to the intended source and load impedances. Validate timing, crosstalk, and video amplitude in the assembled system because connector and trace parasitics can influence the usable channel bandwidth.

🌐

Low-Impedance Cable Buffer

The LT1252CS8 is appropriate as a cable buffer because the Analog Devices manufacturer datasheet identifies current feedback, wide bandwidth, and low-impedance drive as central strengths. Its 100 MHz bandwidth provides useful margin for video signals, while the ±14 V supply permits a substantial output-swing range. Locate the device near the cable driver, keep the feedback loop compact, and use a continuous ground plane beneath the signal path. Check the load impedance and cable length because a highly capacitive or very low-resistance cable can increase output-current demand and expose any unintended peaking that is not apparent from the nominal bandwidth alone.

🔧

Active Video Filter

The LT1252CS8 can serve as the active element in a wideband video filter because it is a current-feedback amplifier with 100 MHz bandwidth and high slew capability. According to the Analog Devices manufacturer datasheet, the device is intended for filters as well as cable drive. Select the feedback and frequency-setting components using the manufacturer's current-feedback guidance, and keep the summing node and feedback paths physically short. Test the filter response with the intended source and load impedances because the same bandwidth that enables wide video filtering also makes parasitic capacitance, grounding, and component tolerances more influential.

🖥️

PC-to-Workstation Video Interface

The LT1252CS8 fits a PC-to-workstation video interface because the Analog Devices manufacturer datasheet specifically identifies RGB signal driving between these systems as an intended use. The 100 MHz bandwidth, flat to 0.1 dB, provides a clear margin over typical analog video requirements, and the 8-pin SOIC package supports compact interface boards. Use the amplifier as a buffer or gain stage close to the source or connector, observe the recommended feedback network, and keep supply returns continuous. Verify the source impedance, monitor termination, and expected cable length so that the channel remains stable under real loading conditions.

📡

Video Signal Conditioning

The LT1252CS8 is useful for general video signal conditioning because a current-feedback amplifier provides flexible gain control while preserving wide bandwidth. According to the Analog Devices manufacturer datasheet, the LT1252 combines 100 MHz bandwidth with a ±14 V supply range and low-cost video positioning. It can buffer a source, compensate for loading, or provide gain ahead of an ADC or display interface. Choose the gain and feedback resistance for the desired closed-loop response, route the high-speed output away from sensitive inputs, and test both frequency response and output settling because gain changes can affect stability and distortion.

What is the LT1252CS8?
The LT1252CS8 is a single-channel, low-cost current-feedback video amplifier designed for RGB, composite-video, cable-driving, and filtering applications. According to the Analog Devices manufacturer datasheet, it provides 100 MHz bandwidth flat to 0.1 dB and operates from a ±14 V supply, giving designers 28 V of total headroom in an 8-pin SOIC package.
What is the bandwidth of the LT1252CS8?
The LT1252CS8 has 100 MHz bandwidth flat to 0.1 dB. According to the Analog Devices manufacturer datasheet, this wide bandwidth supports video transmission between PCs and workstations and enables the amplifier to drive low-impedance cables and filters. In a practical design, the system bandwidth also depends on the selected feedback network, PCB routing, cable length, and load capacitance.
What supply voltage does the LT1252CS8 require?
The LT1252CS8 supports a wide ±14 V supply, equivalent to 28 V across the two supply rails. According to the Analog Devices manufacturer datasheet, the device is intended for video systems where larger signal swings and low-impedance drive are useful. Decoupling capacitors should nevertheless be selected from the regulator's actual ripple, voltage rating, and effective-series-inductance characteristics.
Is the LT1252CS8 still in production?
The Analog Devices manufacturer product page identifies the LT1252 family as production. The LT1252CS8 is therefore treated as an active catalog device rather than an obsolete or last-time-buy item. For an exact procurement commitment, request the current lead time, minimum order quantity, and shipping configuration through the Request a Quote form on this page.
Where can I download the LT1252CS8 datasheet PDF?
The official LT1252CS8 datasheet PDF is available from the Analog Devices document link on this page. According to the Analog Devices manufacturer datasheet, it covers the LT1252 current-feedback video amplifier, its feature set, electrical characteristics, pin descriptions, and application information. Use that document when assigning PCB pins and checking the detailed operating limits.
Where can I find the LT1252CS8 pinout?
The LT1252CS8 pinout is documented in the pin-description section of the Analog Devices manufacturer datasheet. The device uses an 8-pin SOIC package, so use the package pin-description table rather than inferring connections from a generic SOIC drawing. Verify supply, input, output, and feedback-net assignments against the exact LT1252 document before fabrication.
What can replace the LT1252CS8?
The LT1252CS8#PBF is the closest identified drop-in replacement because it retains the same LT1252 device family, 8-pin SOIC footprint, and electrical function while adding a lead-free ordering suffix. According to the Analog Devices manufacturer datasheet, the underlying LT1252 is a current-feedback video amplifier. Request the current availability and lead time through this page's Request a Quote form.
Is the LT1252CS8 the same as the LT1252CS8#PBF?
The LT1252CS8#PBF is the lead-free ordering version of the LT1252CS8 and retains the same 8-pin SOIC electrical package. The primary difference is the ordering and lead-free finish suffix rather than a change in amplifier function. According to the Analog Devices manufacturer product page, the LT1252 family remains in production, subject to current commercial confirmation.
When should I choose the LT1252CS8 over a dual video amplifier?
Choose the LT1252CS8 when the design has a single video channel and requires 100 MHz bandwidth, current-feedback operation, and an 8-pin SOIC implementation. A dual or quad amplifier is preferable when several related channels must share one package, but its different channel count and pinout prevent it from serving as a pin-compatible replacement. The LT1252 is preferable when simplicity and one-channel routing are primary.
Is the LT1252CS8 suitable for RGB video distribution?
The LT1252CS8 is suitable for RGB video distribution because its 100 MHz bandwidth is flat to 0.1 dB and its current-feedback architecture is designed for low-impedance video loads. According to the Analog Devices manufacturer datasheet, wide bandwidth and high slew capability make RGB routing between PCs and workstations practical. Use suitable termination and preserve controlled board and cable impedance.
What is the LT1252CS8 versus LT1252CN8#PBF difference?
The LT1252CS8 uses an 8-pin SO surface-mount package, while the LT1252CN8#PBF uses an 8-pin DIP package according to the LT1252 family ordering information. They serve similar single-channel video-amplifier roles, but their physical footprints are not interchangeable. A DIP-to-SOIC board change requires different pads, placement, and assembly handling.
Can the LT1252CS8 drive a terminated video cable?
The LT1252CS8 is specifically described as a low-cost current-feedback amplifier for driving low-impedance loads such as cables and filters. According to the Analog Devices manufacturer datasheet, its 100 MHz bandwidth supports video-drive tasks, while the low-impedance drive comes with a tradeoff of increased output-current demand. Confirm the load value, cable capacitance, and output-swing requirements before finalizing the channel.
Where can I buy LT1252CS8 online?
Use the Request a Quote form on this page to request LT1252CS8 availability, lead time, and an order quotation for the required package and quantity. The device is identified by Analog Devices as a production member of the LT1252 family. Current commercial status, including stock and minimum order quantity, should be confirmed through the quotation workflow.
How much does the LT1252CS8 cost?
The current LT1252CS8 price depends on order quantity, shipment configuration, and market availability. Use the Request a Quote form on this page for a unit quotation and volume-break review. The manufacturer product page identifies the LT1252 family as production, while current quotation and lead time should be confirmed for the exact CS8 ordering configuration.
What is the lead time for the LT1252CS8?
The current LT1252CS8 lead time depends on factory loading, package configuration, and order volume. Submit the requested quantity, target shipment date, and required packaging details through the Request a Quote form on this page. Because the manufacturer identifies the LT1252 family as production, procurement can focus on confirming the exact commercial schedule for the CS8 configuration.
What are the key specifications engineers should know about the LT1252CS8?
The LT1252CS8 combines a 100 MHz bandwidth flat to 0.1 dB, a ±14 V supply range, current-feedback operation, one amplifier channel, and an 8-pin SOIC package. According to the Analog Devices manufacturer datasheet, these characteristics target RGB and composite-video drive, cables, and filters. Feedback resistance, load capacitance, output swing, and stability remain important application-level checks.

Données de référence d'ingénierie pour LT1252CS8 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LT1252CS8 for a single-channel, low-impedance video path that benefits from current-feedback operation and a 100 MHz bandwidth flat to 0.1 dB. It is a strong fit for RGB routing, composite-video drive, cable buffers, and active filters. Choose LT1252CS8#PBF when a lead-free ordering suffix is required; it preserves the same electrical function and 8-pin SOIC footprint. Consider the LT1253 or LT1254 families when several channels must be consolidated into one package, but they are not pin-compatible replacements for a one-channel LT1252 design. For designs where a single amplifier is sufficient and simplicity matters, LT1252CS8 avoids unused channels and keeps routing straightforward. The final choice should also account for the exact gain, load impedance, cable capacitance, output-current demand, and stability of the chosen feedback network.

Comparaison avec les alternatives

Paramètre Ce produit LT1252CS8#PBF
Package 8-pin SOIC 8-pin SOIC - same
Brand Analog Devices Analog Devices
Amplifier Type Current-feedback video amplifier Current-feedback video amplifier
Number of Channels 1 channel 1 channel
Bandwidth 100 MHz 100 MHz
Flat Bandwidth 100 MHz at 0.1 dB 100 MHz at 0.1 dB
Supply Voltage Range ±14 V (28 V total) ±14 V (28 V total)
Differential Gain Error ±0.1 dB ±0.1 dB
Differential Gain Phase ±0.09 degrees ±0.09 degrees
Lead-Free Ordering No lead-free suffix shown Yes, #PBF suffix

Principaux différenciateurs

  • Same-package lead-free ordering option (vs LT1252CS8#PBF)
  • Purpose-built current-feedback video architecture (vs LT1253 and LT1254 families)
  • Wide video bandwidth with explicit flatness (vs General-purpose low-bandwidth amplifiers)

Notes de conception

Keep the inverting input, feedback components, and output return path compact because current-feedback amplifiers require a physically small feedback loop for predictable high-frequency behavior. Place the device near the driven connector when possible, maintain a continuous ground plane, and avoid routing the output beside sensitive input traces. The Analog Devices manufacturer datasheet's recommended feedback values and gain configurations should form the basis of the layout.

Do not substitute a voltage-feedback feedback resistor directly into the LT1252 design without recalculating the network. Current-feedback amplifiers use feedback impedance to set gain, and a copied resistor can change closed-loop bandwidth, peaking, and stability. Start with the manufacturer's recommended values for the intended gain, then evaluate the complete channel with its source impedance, termination, and cable capacitance.

Decouple each supply rail close to the device and use capacitors with adequate high-frequency behavior for the operating bandwidth. Route each return current directly through the ground plane rather than through a shared narrow trace. Check output-current demand at the intended load impedance and verify output swing with the actual termination; the LT1252's 100 MHz bandwidth does not remove the need to respect dynamic-load and signal-integrity limits.

Treat the driven cable as part of the circuit rather than as an isolated load. Measure frequency response, edge ringing, and settling with the intended cable length and termination, and compare the result against the 100 MHz, 0.1 dB-flat bandwidth specification. If the source impedance is high, add source termination or buffering where appropriate to avoid distortion before the amplifier's gain stage.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The LT1252CS8#PBF ordering suffix denotes a lead-free version, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for the target ordering code.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

LT1252CS8 datasheet LT1252CS8 pinout LT1252CS8 datasheet pdf LT1252CS8 equivalent LT1252CS8 replacement LT1252CS8 cross reference LT1252CS8 footprint LT1252CS8 price LT1252CS8 stock Analog Devices LT1252CS8 LT1252CS8 100MHz video amplifier LT1252CS8 RGB video buffer LT1252CS8 composite video driver LT1252CS8 current feedback amplifier

Composants & termes associés

Analog Devices LT1252CS8 LT1252CS8#PBF LT1252 LT1253 LT1254 current-feedback amplifier video amplifier operational amplifier analog signal-chain IC semiconductor 100 MHz bandwidth 0.1 dB flatness ±14 V supply composite video RGB video low-impedance cable drive active filter 8-pin SOIC SOIC package family surface-mount technology SMD feedback resistor lead-free packaging RoHS
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ