M2GL005-VF400 - 6K-Logic Cell IGLOO2 FPGA | Microchip
Référence : M2GL005-VF400 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $31.16 | $31,16 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
M2GL005-VF400 Présentation
An FPGA is a programmable semiconductor in the broader logic-device hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, memory resources, programmable I/O, and embedded control logic on one semiconductor die. The IGLOO2 family combines low-density logic capacity with nonvolatile flash configuration and is positioned below larger FPGAs used for high-channel-count processing or complex system-on-chip integration.
Verified listings identify M2GL005-VF400 as an IGLOO2 FPGA containing 6,060 cells, 169 I/O, a 400-LFBGA package, and a 1.2 V supply. Its 400-pin package provides a high pin count relative to its logic density, making it useful when a design needs substantial parallel I/O, interface signaling, or control connectivity. The Microchip product family is specifically described for general-purpose bridging, I/O expansion and conversion, system management, and secure connectivity functions across communications, industrial, medical, defense, and aviation markets.
The M2 prefix identifies the IGLOO2 family, while the 005 suffix identifies the smallest 6,060-cell member shown in the verified product data. The VF400 ordering code denotes the verified 400-LFBGA package arrangement. Exact timing, static-power, dynamic-power, supported I/O standards, temperature grade, and electrical limits must be selected from the manufacturer datasheet using the complete ordering code; those values were not supplied in the retrieved source text and are therefore not inferred here.
Typical design roles include protocol-interface bridges, parallel-to-serial data collection, programmable I/O expansion, embedded system supervision, industrial control logic, and low-power communications infrastructure. An FPGA-based bridge is useful when fixed logic would require multiple interface translators or glue devices. Consolidating those functions into configurable logic can reduce component count and allow firmware-driven changes, but designers must budget I/O placement, timing closure, configuration checks, bank-voltage planning, and PCB-routing resources.
The most important design consideration is exact migration control. Microchip's IGLOO2 VF400 packaging supports footprint-oriented design work, but pin features, bank assignments, voltage compatibility, and available I/O functions must be compared before replacing another device. Use Microchip application note AN4153 and the IGLOO2 pin-information document as supplemental PCB and pin-planning references. This page combines verified distributor data, manufacturer resources, package details, and migration guidance rather than estimating unreported electrical values.
Alternatives de remplacement direct pour M2GL005-VF400 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesM2GL005-VF400 Valeurs maximales et caractéristiques électriques
| FPGA Family | IGLOO2 |
| Device Type | Low-density flash FPGA |
| Logic Cells | 6,060 cells |
| I/O Count | 169 I/O |
| Core Supply Voltage | 1.2 V |
| Boîtier | 400-LFBGA |
| Package Pin Count | 400 pins |
| Type de montage | Surface mount |
| Configuration Memory | Nonvolatile flash |
| Logic Array Cell Identifier | 719872 |
| Manufacturer Product Family | M2GL005 |
| FPGA Hypernym | Field-programmable gate array |
| Application Category | Programmable logic and I/O expansion |
| Target Markets | Communications, industrial, medical, defense, and aviation |
Guide de configuration des broches du M2GL005-VF400 400 pins
Configuration des broches du M2GL005-VF400 (boîtier 400 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour M2GL005-VF400.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
M2GL005-VF400 convient pour 7 applications: Industrial Protocol Bridging, Programmable I/O Expansion, System Management and Supervision, Communications Control Plane, Data Acquisition and Interface Conversion, Secure Connectivity and Authentication, Medical and Instrumentation Control.
Industrial Protocol Bridging
The M2GL005-VF400 fits an industrial bridge when a system must translate between parallel control logic and one or more serial interfaces. Its verified 6,060 logic cells provide programmable protocol state machines, while 169 I/O and the 400-LFBGA package expose substantial board connectivity. The device can be placed between sensors or actuators and a communication controller, provided every interface is assigned to a voltage-compatible bank and timing is closed in the selected toolchain. Unlike a fixed bridge IC, the flash FPGA permits logic updates, optional diagnostics, and error handling in one programmable device. The principal trade-off is that the engineer must verify supported I/O standards, pin multiplexing, and timing constraints for the exact 400-ball layout.
Recommandé
Programmable I/O Expansion
M2GL005-VF400 is appropriate when a controller needs additional discrete inputs, outputs, counters, or interface adaptation. The verified 169-I/O count gives the designer many available connections, while 6,060 logic cells can implement acquisition control, debouncing, handshake sequencing, and fault logging. A practical design would instantiate grouped I/O registers in the FPGA, apply the required voltage to each compatible bank, and connect external protection before the FPGA balls. Compared with several fixed logic ICs, this approach centralizes control and lets the configuration change when the board requirements evolve. Engineers must still confirm package ball assignments and avoid treating all I/O pins as automatically interchangeable across voltage or feature groups.
Recommandé
System Management and Supervision
The M2GL005-VF400 can consolidate supervisory logic that monitors resets, power states, fault flags, interlocks, and watchdog events in a compact flash FPGA. Its 6,060 cells are suited to programmable state machines and fault-response paths, and 169 I/O provide connections to multiple rails and monitoring components. The design can route fault events to a communications controller or local indicator while maintaining programmable debounce and recovery rules. This consolidation may reduce discrete logic, but safety-critical decisions should not be assigned solely from general-purpose logic without the required diagnostic and qualification process. Verify timing margins, I/O voltage domains, configuration integrity, and fail-safe behavior before using the FPGA in protective equipment.
Recommandé
Communications Control Plane
M2GL005-VF400 can serve as a low-density control FPGA beside a communications processor, handling framing, status registers, interrupt routing, or interface adaptation. The 6,060-cell device is positioned for general-purpose control-plane logic rather than high-throughput parallel processing, and its 400-pin package provides a large pin budget for parallel buses and control signals. A practical architecture keeps latency-sensitive paths local, uses synchronous interfaces where appropriate, and validates every external interface against the selected voltage bank. Compared with fixed glue logic, the flash configuration supports revision and field-update flexibility. The design must confirm supported I/O standards, timing, pin multiplex options, and clocking resources in the Microchip documentation.
Recommandé
Data Acquisition and Interface Conversion
M2GL005-VF400 is well matched to small acquisition front ends that need programmable sequencing, parallel buffering, and format conversion. Its 6,060 logic cells can implement counters, state machines, data packing, and control logic, while 169 I/O offers substantial connectivity to sensors and converters. The FPGA may collect parallel samples, trigger conversion events, and present processed data to a communications controller. This can shorten the path from analog front ends to digital processing compared with multiple fixed-format devices. Engineers must determine maximum interface rates, supported I/O standards, bank voltages, and timing closure from the datasheet; the retrieved evidence does not provide those values, so they must not be inferred from the 1.2 V core specification.
Recommandé
Secure Connectivity and Authentication
M2GL005-VF400 can support secure-connectivity control functions by implementing protocol state machines, command filtering, counters, or interface segmentation in programmable logic. Microchip explicitly identifies secure connectivity as an IGLOO2 family application, and the device's 6,060 cells provide room for moderate control-plane logic without moving to a larger FPGA. Designers can partition external ports into controlled interfaces, monitor state transitions, and isolate unrelated communication paths in the programmed design. The part must not be treated as a complete cryptographic solution without defining the required algorithms, key handling, attack model, and update process. Final qualification should verify side-channel controls, secure configuration requirements, timing, and the exact operating-temperature grade.
Recommandé
Medical and Instrumentation Control
The M2GL005-VF400 can serve as a programmable coordination and interface device in instrumentation where multiple sensors, converters, and communication links must be managed. The 169-I/O count and 6,060 logic cells support moderate acquisition sequencing, isolation boundaries, status aggregation, and control output generation. A medical or diagnostic instrument should use the ordering variant matching the environmental and reliability requirements, then apply its documented risk controls and validation process. Compared with hard-wired control, reprogrammable logic simplifies product variants and improves diagnostics, but it also adds configuration-management and verification obligations. Engineers must confirm temperature grade, supported I/O standards, clocking, timing, and isolation architecture from the complete ordering-code documentation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour M2GL005-VF400 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Package | 400-LFBGA |
| Brand | Microchip Technology |
| Logic Cells | 6,060 cells |
| I/O Count | 169 I/O |
| Core Supply Voltage | 1.2 V |
| Configuration Memory | Nonvolatile flash |
| FPGA Family | IGLOO2 |
| Mounting Type | Surface mount |
| Target Applications | Bridging, I/O expansion and conversion, system management, secure connectivity |
| Unit Price | $31.16 starting price as of 2026-10-23 |
Principaux différenciateurs
- High verified I/O availability relative to logic density (vs M2GL005-VF400I)
- Nonvolatile configuration simplifies board implementation (vs M2GL005-VFG400)
- Dense 400-pin package supports extensive board connectivity (vs M2GL005-1VF400)
Notes de conception
Use Microchip application note AN4153 together with the IGLOO2 pin-information guide when planning the 400-LFBGA PCB. Treat the package drawing and bank table as authoritative, maintain escape-routing space from the dense ball field, and route clocks and sensitive interfaces away from likely switching-node return currents. Because the retrieved data establishes 400 pins but not the complete ball map, do not begin layout solely from a generic BGA template.
Plan separate, decoupled supplies for the verified 1.2 V FPGA core and each compatible external I/O bank. The I/O voltage for the target must be selected from the full ordering-code and bank data rather than assumed from the core voltage. Follow the datasheet's recommended capacitors, voltage sequencing, power-startup limits, and exposed thermal requirements. Review the complete power budget after assigning every bank because simultaneous I/O current contributes to board heating.
Map each external interface to a bank with the correct voltage, drive strength, and supported I/O standard. Maintain continuous return paths beneath high-speed nets, use appropriate source termination where the interface requires it, and constrain clocks through the FPGA timing tools. Because the supplied snippets do not identify supported standards or maximum interface rates, consult the official IGLOO2 datasheet before selecting edge rates or termination values.
Do not treat a shared 400-pin footprint as proof of drop-in compatibility. M2GL005-VF400I, M2GL005-VFG400, and M2GL005-1VF400 appeared in search results, but suffix changes may affect grade, package coding, or ordering attributes. Compare the complete ordering code, ball map, bank assignments, electrical limits, temperature range, and configuration identification. Microchip's VF400 migration documentation explicitly notes feature differences among IGLOO2 devices, so pin migration requires engineering review.
Informations de conformité
The supplied product, distributor, and cross-reference snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than inferred.
