MAX131ACQH+TD - 3.5 Digit ADC Dual-Slope, PLCC-44 | Maxim Integrated
Référence : MAX131ACQH+TD ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $8.9 | $89,00 |
| 100 | $7.45 | $745,00 |
| 500 | $6.2 | $3 100,00 |
| 1 000 | $5.1 | $5 100,00 |
MAX131ACQH+TD Présentation
An ADC (analog-to-digital converter) is a semiconductor device that converts continuous analog signals into discrete digital codes; the dual-slope architecture is one of the oldest and most robust integrating-converter topologies, prized for excellent normal-mode and common-mode noise rejection because the integrator averages the input over a fixed integration window. Dual-slope ADCs sit within the data-converter family, which itself is a sub-category of data acquisition ICs under mixed-signal and power-management-adjacent signal-chain semiconductors.
Key features of the MAX131ACQH+TD include a single differential input channel, an on-chip bandgap voltage reference for measurement precision, and external reference support for system-level calibration. The integration architecture provides inherent 50 Hz / 60 Hz line-noise rejection. The serial data interface simplifies microcontroller read-back, and the device operates from a single supply rail.
From a technical depth perspective, the dual-slope conversion cycle consists of a defined integration phase (run-up) followed by a de-integration phase (run-down) against the reference; the count accumulated during run-down is proportional to the input voltage. This inherent averaging makes the architecture highly immune to periodic noise, especially at power-line frequencies, but limits throughput to a few conversions per second.
Typical applications include digital panel meters, handheld multimeters, industrial process monitors, weighing scales, and any precision low-frequency measurement front-end where line-noise rejection and absolute accuracy outweigh conversion speed.
When designing with this part, observe the integration timing capacitor and reference bypass capacitor recommendations in the datasheet, as they directly affect conversion linearity and noise performance. The PLCC-44 footprint simplifies PCB integration but requires a socket or careful reflow profiling.
Alternatives de remplacement direct pour MAX131ACQH+TD — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MAX131ACQH+TD (même facteur de forme et même empreinte) — différant par Input Voltage Range, Resolution, Architecture, Package, Number of Channels.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MAX131ACQH+
✅ Remplacement direct✓ En stock
$9.28 / unité
Voir la fiche technique →MAX131ACQH+
✅ Remplacement direct✓ En stock
$9.28 / unité
Voir la fiche technique →MAX128BCNG
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$10.27 / unité
Voir la fiche technique →MAX1270BENG
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$19.85 / unité
Voir la fiche technique →MAX1162ACUB+T
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$5.74 / unité
Voir la fiche technique →MAX131ACQH+TD Valeurs maximales et caractéristiques électriques
| Architecture | Dual-Slope Integrating ADC |
| Résolution | 3.5 digits |
| Number of Channels | 1 differential input |
| Input Type | Differential |
| Reference Type | External (bandgap on-die) |
| Data Interface | Serial |
| Configuration | Single ADC |
| Plage de tension d'entrée | 0.2 V to 2 V |
| Nombre de broches | 44 |
| Package Type | PLCC-44 (QCCJ) |
| Terminal Form | J-Bend |
| Package Code | QCCJ |
| Température de fonctionnement | 0 C to 70 C |
| Temperature Grade | Industrial |
| Display Type | LCD driver output |
| Part Status | Obsolete |
Configuration des broches de MAX131ACQH+TD
| Broche 1 | INT — Integrator output |
| Broche 2 | AZ — Auto-zero compensation |
| Broche 3 | BUF — Buffer output |
| Broche 4 | INHI — Differential input high |
| Broche 5 | INLO — Differential input low |
| Broche 6 | COMMON — Common-mode reference |
| Broche 7 | REF+ — Reference positive input |
| Broche 8 | REF- — Reference negative input |
| Broche 9 | V+ — Positive supply |
| Broche 10 | GND — Ground |
| Broche 11 | OSC1 — Oscillator input |
| Broche 12 | OSC2 — Oscillator output |
| Broche 13 | SCLK — Serial clock |
| Broche 14 | SDO — Serial data output |
| Broche 15 | CS — Chip select |
| Broche 16 | BP — Backplane driver |
| Broche 17 | SEG1 — LCD segment 1 |
| Broche 18 | SEG2 — LCD segment 2 |
| Broche 19 | SEG3 — LCD segment 3 |
| Broche 20 | SEG4 — LCD segment 4 |
| Broche 21 | SEG5 — LCD segment 5 |
| Broche 22 | SEG6 — LCD segment 6 |
| Broche 23 | SEG7 — LCD segment 7 |
| Broche 24 | SEG8 — LCD segment 8 |
| Broche 25 | SEG9 — LCD segment 9 |
| Broche 26 | SEG10 — LCD segment 10 |
| Broche 27 | SEG11 — LCD segment 11 |
| Broche 28 | SEG12 — LCD segment 12 |
| Broche 29 | SEG13 — LCD segment 13 |
| Broche 30 | SEG14 — LCD segment 14 |
| Broche 31 | SEG15 — LCD segment 15 |
| Broche 32 | SEG16 — LCD segment 16 |
| Broche 33 | SEG17 — LCD segment 17 |
| Broche 34 | SEG18 — LCD segment 18 |
| Broche 35 | SEG19 — LCD segment 19 |
| Broche 36 | SEG20 — LCD segment 20 |
| Broche 37 | SEG21 — LCD segment 21 |
| Broche 38 | SEG22 — LCD segment 22 |
| Broche 39 | SEG23 — LCD segment 23 |
| Broche 40 | SEG24 — LCD segment 24 |
| Broche 41 | TEST — Factory test pin (no-connect in application) |
| Broche 42 | POL — Polarity indicator |
| Broche 43 | BP2 — Backplane 2 driver |
| Broche 44 | NC — Not connected (per datasheet) |
Applications typiques
MAX131ACQH+TD convient pour 6 applications: Digital Panel Meters, Handheld Digital Multimeters, Industrial Weighing Scales, Process Control Monitor Front-Ends, Battery-Powered Field Measurement, Automotive Battery / Sensor Test Equipment.
Digital Panel Meters
The MAX131ACQH+TD's 3.5-digit dual-slope conversion and integrated LCD drivers make it a drop-in solution for digital panel meters. With 0.2 V to 2 V differential input range and on-die bandgap reference, it directly drives LCD displays showing DC voltage, current, temperature (via RTD), or pressure (via strain gauge) without external ADC stages. Compared to SAR ADCs of similar bit count, it provides inherently superior 50 Hz/60 Hz line-noise rejection averaging over one full integration window - critical in factory and process-control panels where mains-borne interference is unavoidable. Place 0.1uF ceramic bypass caps on supply and reference pins per datasheet for optimum performance.
Recommandé
Handheld Digital Multimeters
The MAX131ACQH+TD is well-suited for handheld digital multimeter (DMM) front-ends because its dual-slope architecture provides automatic 60 dB+ normal-mode rejection at 50 Hz/60 Hz mains frequency, eliminating measurement errors from pick-up on test leads. The serial interface allows the main MCU to read conversion results efficiently while the LCD segment drivers directly drive the meter display. The PLCC-44 package enables compact PCB layouts suitable for portable form factors. Power consumption is low enough for battery-powered operation when paired with a low-quiescent regulator; the on-chip bandgap reference eliminates external precision components.
Recommandé
Industrial Weighing Scales
Industrial bench and floor scales benefit from the MAX131ACQH+TD's low-noise integrating conversion that resolves microvolt-level load-cell signals reliably over full bridge excitation. The differential input accepts a 0.2 V to 2 V signal range directly from a load cell bridge with 5 V or 10 V excitation, while the on-chip bandgap reference provides stable scaling for calibration. Unlike sigma-delta converters, the dual-slope approach is highly robust to periodic mains pick-up from nearby motor drives and inverter equipment in factory environments. The PLCC-44 (QCCJ) package and 0-70 C industrial temperature grade suit sealed scale enclosures deployed in harsh production environments.
Recommandé
Process Control Monitor Front-Ends
Process-control monitoring equipment uses the MAX131ACQH+TD as a precision DC measurement stage reading 4-20 mA loops, thermocouple/RTD signals, and strain-gauge bridges. The dual-slope architecture's inherent averaging over the integration window rejects 50 Hz/60 Hz mains interference common in industrial cabinets, providing accurate readings without complex digital filtering. The serial data interface allows connection to industrial microcontrollers and PLCs for downstream display and alarming. The 0-70 C industrial temperature range suits control-panel environments, and the PLCC-44 package supports dense PCB layouts.
Recommandé
Battery-Powered Field Measurement
The MAX131ACQH+TD operates at low quiescent current suitable for battery-powered field measurement instruments including portable pH meters, conductivity meters, and environmental loggers. The dual-slope conversion provides excellent immunity to electromagnetic interference from nearby switching regulators and battery-charging circuits, while the on-chip reference eliminates power-hungry external reference ICs. Low conversion rate (a few conversions per second) suits slowly-changing physical measurements. Combined with a low-Iq LDO, the part supports months of battery life in intermittent-sampling applications.
Recommandé
Automotive Battery / Sensor Test Equipment
Service-grade automotive diagnostic stations use the MAX131ACQH+TD to measure battery voltage, alternator output, and DC sensor signals with strong immunity to the noisy electrical systems of running engines. The dual-slope integration rejects cranking transients and alternator ripple, providing stable readings without complex filtering. The 0-70 C industrial temperature range suits service-environment operation; the PLCC-44 footprint allows dense bench-instrument PCB layouts. The serial interface enables easy connection to diagnostic-station displays and processors.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX131ACQH+TD — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX131ACQH+ | MAX131ACQH | MAX128BCNG | MAX1270BENG | MAX1162ACUB+T |
|---|---|---|---|---|---|---|
| Package | PLCC-44 (QCCJ) | PLCC-44 (QCCJ) - same | PLCC-44 (QCCJ) - same | DIP-24 | DIP-24 | uMAX-10 |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Architecture | Dual-Slope Integrating | Dual-Slope Integrating | Dual-Slope Integrating | SAR (12-bit) | SAR (12-bit) | SAR (14-bit) |
| Resolution | 3.5 digits (~12 bit) | 3.5 digits | 3.5 digits | 12-bit+sign | 12-bit | 14-bit |
| Input Channels | 1 differential | 1 differential | 1 differential | 1 single-ended | 8 single-ended | 1 single-ended |
| Interface | Serial | Serial | Serial | Parallel | Serial | Serial SPI |
| Operating Temperature | 0 C to +70 C | 0 C to +70 C | 0 C to +70 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Active | Obsolete | Active |
| Number of Pins | 44 | 44 | 44 | 24 | 24 | 10 |
Principaux différenciateurs
- Integrated LCD segment drivers (vs MAX1270BENG (SAR, no LCD drivers))
- On-chip bandgap reference (vs MAX128BCNG (external reference required))
- Superior 50 Hz/60 Hz line-noise rejection (vs MAX1162ACUB+T (SAR, no inherent averaging))
Notes de conception
Place the integrator capacitor (CINT) and auto-zero capacitor (CAZ) as close as possible to their respective pins to minimize leakage paths and pin-to-pin coupling. Use a low-leakage film or ceramic capacitor with NP0/C0G dielectric for CAZ; polyester or polypropylene is suitable for CINT. Reference bypass: place a 0.1uF ceramic cap on REF+ to REF- within 5 mm of the pins to prevent reference noise from degrading linearity.
Oscillator frequency directly sets the integration period and therefore the conversion rate and 50 Hz/60 Hz noise rejection. Crystal oscillator is recommended over RC for production designs to maintain calibration accuracy across temperature. The differential input range (0.2 V to 2 V) must be respected; signals outside this range saturate the integrator and produce non-linear results. Use input-protection resistors and TVS diodes when measuring signals that may exceed the input range.
The MAX131ACQH+TD requires a clean single-supply rail with low ripple; place a 10uF tantalum or ceramic bulk cap plus 0.1uF ceramic decoupling cap directly at the V+ pin. For battery-powered designs, a low-dropout regulator with <30 uVrms noise prevents power-rail noise from coupling into the integrator. When switching regulators are used elsewhere on the board, separate the analog ground return path from noisy digital grounds using a ground-plane cut or stitching strategy.
Informations de conformité
Lead-free PLCC package per Maxim product marking. RoHS compliant per distributor listings; REACH compliance inferred from Maxim corporate policy. Not AEC-Q100 qualified - this is an industrial-grade part intended for non-automotive applications. Conflict-minerals status not explicitly stated by Maxim/ADI for this obsolete product.
