MC14568BD - Phase Comparator & Programmable Counter | onsemi
Référence : MC14568BD ✓ ActifMC14568BD Présentation
A phase comparator is a logic component that determines the relationship between two signals, commonly returning a comparison state when the signals agree or differ. A counter is a sequential digital circuit that records successive clock events and generates corresponding binary states. By integrating comparison and counting functions, the MC14568BD supports signal-phase monitoring, periodic event counting, and programmable frequency division within one compact device.
The MC14568B family provides a programmable divide-by-N function implemented with a 4-bit binary counter. This architecture allows an incoming event sequence to be reduced to a selected division ratio. The integrated 100 counter provides a separate counting path, while the phase-comparator section supports two-input phase relationships. These functions are useful when a system must derive a slower periodic indication, monitor relative signal timing, or combine counting and comparison behavior.
Constructed with MOS P-channel and N-channel enhancement-mode devices, the MC14568BD uses complementary CMOS in a monolithic implementation. CMOS logic provides a natural connection to digital systems because its switching behavior supports low static power in suitable operating states and broad integration with TTL-compatible system logic when operating and interface conditions are properly matched.
Typical uses include digital timing and sequencing systems, phase-error indication, programmable pulse division, event counting, periodic clock generation, and industrial control logic. The same integrated architecture can simplify designs that would otherwise require a separate comparator and binary counter, reducing component count and keeping the comparison and counting functions within one device.
Designers should verify the supply-voltage range, operating-temperature limits, input thresholds, output-drive capability, and timing characteristics in the manufacturer datasheet before implementation. The divide control and clock-source connections must also be configured according to the datasheet logic table so that the intended division ratio is selected without invalid intermediate states.
This product page organizes the MC14568BD function, package information, verified lifecycle data, sourcing route, and practical design guidance. It also identifies the base-family MC14568B alternative while clearly distinguishing it from suffix-specific procurement decisions. Engineering review should always confirm the exact package suffix, pinout, operating limits, and logic behavior before approving a substitution.
Alternatives de remplacement direct pour MC14568BD — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
MC14568B
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC14568BD Valeurs maximales et caractéristiques électriques
| Product Type | Phase comparator and programmable counter |
| Integrated Functions | Phase comparator, 100 counter, and programmable divide-by-N counter |
| Counter Architecture | 4-bit binary counter |
| Counter Output | Programmable divide-by-N operation |
| Triggering Edge | Positive-edge triggered |
| Logic Technology | Complementary CMOS |
| Transistor Construction | MOS P-channel and N-channel enhancement-mode devices |
| Implementation | Monolithic |
| Boîtier | SOIC-16 |
| Nombre de broches | 16 pins |
| Type de montage | Surface mount |
| Statut du cycle de vie | Active |
| Statut RoHS | Compliant |
Guide de configuration des broches du MC14568BD soic-16
Configuration des broches du MC14568BD (boîtier soic-16). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour MC14568BD.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC14568BD convient pour 6 applications: Programmable Clock Division, Phase-Error Monitoring, Digital Event Counting, Industrial Sequence Control, Periodic Pulse Generation, Digital Instrumentation Timing.
Programmable Clock Division
The MC14568BD fits programmable clock-division systems because it combines a divide-by-N 4-bit binary counter with positive-edge-triggered operation in a 16-pin SOIC package. A clock source can drive the counter section, and the divide-control inputs select the desired division relationship according to the manufacturer logic table. This consolidation can replace separate binary-counter and decoding logic while preserving a compact surface-mounted footprint. The design must maintain the documented supply range and clock timing limits, and unused counter outputs should be handled according to the datasheet rather than left to unintended logic states.
Recommandé
Phase-Error Monitoring
The integrated phase-comparator section makes the MC14568BD suitable for monitoring the relative timing of two digital signals. Comparator outputs can be interpreted by surrounding control logic to indicate agreement, disagreement, or another documented relationship, while the counter functions provide a complementary event-counting path. This arrangement is useful in synchronization and phase-control subsystems where discrete comparator and counter packages would increase board area. Exact input modes, output truth-table behavior, and timing margins should be implemented directly from the manufacturer datasheet.
Recommandé
Digital Event Counting
The MC14568BD provides a positive-edge-triggered 100-counter that can accumulate a fixed sequence of input events. This function is applicable to pulse counting, repetitive activity registration, and supervisory logic that needs to determine whether a prescribed number of events has occurred. Because the counter shares a package with the phase comparator and programmable divider, designers can combine event registration with timing-ratio generation without distributing one function across multiple ICs. Input conditioning, reset behavior, maximum operating frequency, and output timing must be checked against the manufacturer datasheet.
Recommandé
Industrial Sequence Control
The MC14568BD can support industrial sequence-control modules that require phase comparison, periodic event counting, and programmable division within one logic package. A controller can use the comparator to monitor a timing relationship, the 100-counter to register repeated operations, and the programmable counter to derive a slower service interval. Consolidating these functions reduces package count and simplifies board partitioning in compact control equipment. Industrial suitability depends on confirming the documented supply voltage, operating-temperature range, and electrical noise margins for the installation environment.
Recommandé
Periodic Pulse Generation
The programmable divide-by-N architecture in the MC14568BD supports periodic-pulse generation when an input clock is divided to produce a lower-rate timing indication. Such a function is useful for sampling strobes, supervisory timers, and cyclic control signals in digital systems. Positive-edge-triggered counting provides a consistent event boundary, while the 4-bit counter and divide-control section permit programmable ratios. The selected control state, maximum clock rate, output loading, and timing tolerances must be verified in the manufacturer datasheet before treating the output as a system timing reference.
Recommandé
Digital Instrumentation Timing
Instrumentation designs can use the MC14568BD to divide a reference clock, count recurring measurement events, and compare signal phase within one monolithic complementary-CMOS device. These functions are relevant to repetitive test systems where a derived timing strobe must remain synchronized with counted activity. The 16-pin SOIC package supports compact surface-mounted construction, and RoHS compliance is identified for the product. Instrument-specific accuracy still depends on external clock quality and must be evaluated using the datasheet’s timing, temperature, and supply-voltage characteristics.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC14568BD — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC14568B |
|---|---|---|
| Package | SOIC-16 | SOIC-16 - confirm exact suffix |
| Brand | onsemi | Motorola, Inc. |
| Product Type | Phase comparator and programmable counter | Phase comparator and programmable counter |
| Phase Comparator | Integrated | Integrated |
| 100 Counter | Integrated | Integrated |
| Programmable Counter | 4-bit divide-by-N binary counter | 4-bit divide-by-N binary counter |
| Triggering Edge | Positive edge | Positive edge |
| Logic Technology | Complementary CMOS | Complementary CMOS |
Principaux différenciateurs
- Three timing functions integrated in one monolithic device (vs MC14568B)
- Explicit SOIC-16 ordering suffix (vs MC14568B)
- Programmable ratio with positive-edge-triggered counting (vs MC14568B)
Notes de conception
Decouple the power pins with a local ceramic bypass capacitor and follow the manufacturer’s recommended supply and decoupling network. Because the phase comparator and counters can respond quickly to clock and input transitions, a short supply-current path and low-impedance ground return are essential. Confirm the permitted supply-voltage range and unused-input states in the manufacturer datasheet before powering the assembled board.
Route the clock and divide-control nets away from noisy analog or switching-power regions, and place bypass components close to their associated pins. Keep the SOIC-16 footprint and thermal pad requirements consistent with the selected package drawing; the MC14568BD is a logic IC rather than a power device, so an exposed-pad connection should be used only if the package documentation specifically requires one. Inspect the assembled board for adjacent trace coupling and return-path discontinuities.
Do not choose a division ratio solely from the 4-bit counter width. Program the divide-control inputs according to the manufacturer’s valid-state table and ensure transitions occur when the clock is in the specified state. Also verify reset and unused-pin behavior, since incorrect assumptions about the 100-counter and comparator sections can cause unexpected output states. Perform timing tests across the intended supply-voltage and temperature ranges.
Informations de conformité
RoHS compliance is identified in the product listings. No qualification or material-compliance claims are made beyond that documented status.