MC3486N - 4-Channel RS-422/423 Receiver | Texas Instruments
Référence : MC3486N ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0.1932 | $0,19 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
MC3486N Présentation
A differential line receiver is an interface-circuit type that converts balanced or differential signaling into a single-ended digital signal. It belongs to the broader hierarchy of transceiver interface ICs, communication interfaces, logic-level conversion devices, and semiconductors. In an RS-422 system, the receiver helps recover a reliable logic state from a differential line while rejecting common-mode noise. The MC3486 is intended for systems using the complementary MC3487 quadruple differential line driver.
The principal features visible in the verified manufacturer information are four independent differential-input receivers, TTL-compatible outputs, and a high-impedance output state on each channel. The 3-state outputs support shared-bus arrangements when multiple receivers or bus drivers need to be isolated. The single 5 V supply simplifies interface design, while the 0°C to 70°C characterization targets commercial-temperature equipment.
The MC3486 is suitable for industrial control links, multi-channel data acquisition, instrumentation, computer peripherals, and embedded communication interfaces where balanced differential signaling is preferred over single-ended interconnects. Its four channels allow several receiver functions to share one IC, reducing board area and simplifying firmware or system configuration. The device is intended to be used with suitable line drivers and properly terminated transmission lines.
The main design consideration is ensuring that the selected companion driver, cable, termination, grounding, and logic interface match the system requirements. The manufacturer states that the MC3486 is designed for optimum performance with the MC3487 quadruple differential line driver. Review the official datasheet for electrical limits, enable or output-control details, and application-specific timing before finalizing a circuit.
This page combines the verified manufacturer specifications, distributor package information, source URLs, and practical interface-selection guidance. It is intended to help engineers identify the correct device, compare compatible alternatives, and plan a robust differential-interface implementation.
Alternatives de remplacement direct pour MC3486N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC3486NG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC3486
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DS3486N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SN75ALS175N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AM26LS32ACN
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC3486N Spécifications
| Product Type | Quadruple differential line receiver |
| Number of Channels | 4 independent channels |
| Supported Standards | ANSI TIA/EIA-422-B, TIA/EIA-423-B, ITU V.10 and V.11 |
| Tension d'alimentation | 5 V |
| Type de sortie | TTL-compatible |
| Output State | 3-state with high-impedance state |
| Input Type | Differential |
| Température de fonctionnement | 0°C to 70°C |
| Boîtier | 16-pin PDIP |
| Type de montage | Through-hole |
| Companion Driver | MC3487 quadruple differential line driver |
| Differential Interface | RS-422/RS-423 |
| Logic Compatibility | TTL-compatible outputs |
| Output Isolation | High-impedance state per output |
| Manufacturer | Texas Instruments |
| Datasheet Description | Monolithic quadruple differential line receiver with 3-state outputs |
| Distributor Package Designation | 16-PDIP |
Guide de configuration des broches du MC3486N 16-pdip
Configuration des broches du MC3486N (boîtier 16-pdip). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MC3486N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC3486N convient pour 6 applications: Industrial Control Interfaces, Instrumentation and Data Acquisition, Embedded Communication Systems, Multi-Axis Positioning and Motion Control, Computer Peripherals and Legacy Equipment, Distributed Sensor and Monitor Systems.
Industrial Control Interfaces
The MC3486N fits four-channel industrial control links that require balanced differential signaling and TTL-compatible digital outputs. Its four independent receivers allow multiple machine-control or sensor-interface signals to share one 16-pin PDIP device, while the single 5 V supply simplifies the logic-side connection. The 0°C to 70°C characterization makes it appropriate for commercial-temperature equipment, provided the enclosure and cable environment stay within the published range. The MC3487 is identified by Texas Instruments as the intended complementary driver, helping define a complete RS-422/RS-423 interface.
Recommandé
Instrumentation and Data Acquisition
The MC3486N is useful in multi-channel instrumentation where several differential digital links feed TTL-based control or measurement logic. Four independent channels reduce the number of receiver packages needed on a crowded controller board, and differential inputs help reject common-mode disturbance when signals are routed through longer cables. The 5 V supply and TTL-compatible outputs align the receiver with conventional digital subsystems. Designers should still verify input thresholds, timing, termination, grounding, and cable length against the official datasheet.
Recommandé
Embedded Communication Systems
The MC3486N can provide four differential receiver channels in an embedded control or communication system using balanced RS-422/RS-423 links. It is appropriate when a controller must receive commands, status, or sensor data through electrically robust differential lines rather than single-ended signals. The TTL-compatible outputs can feed a host processor or programmable logic, subject to the voltage and timing requirements of the selected downstream device. The companion MC3487 line driver should be used to establish a matched transmit side.
Recommandé
Multi-Axis Positioning and Motion Control
The four receiver channels in the MC3486N can support multi-axis positioning, motion-control, or distributed I/O systems where separate differential command and feedback lines require independent reception. The receiver’s 3-state outputs can help isolate outputs when multiple interface devices share a bus, provided the external control and enable conditions are implemented correctly. The device’s commercial-temperature characterization supports typical indoor equipment, but system designers must calculate cable noise margin, propagation delay, and grounding for the actual actuator environment.
Recommandé
Computer Peripherals and Legacy Equipment
The MC3486N is relevant to legacy computer peripherals and industrial equipment interfaces that use balanced differential signaling. The quadruple receiver arrangement can consolidate several receive functions into one IC, while the 5 V supply supports conventional TTL logic systems. Compatibility with the MC3487 driver gives a defined starting point for a complete interface, but legacy systems may use unusual pin assignments or termination schemes. Before substitution, verify every package pin, supply requirement, output-state control, and voltage level in the original system documentation.
Recommandé
Distributed Sensor and Monitor Systems
The MC3486N can receive four differential data lines from distributed sensors, monitors, or remote modules in a commercial-temperature control cabinet. Differential reception is useful when sensor signals must cross cables or wiring spaces where common-mode noise can affect single-ended logic. The receiver’s TTL-compatible outputs allow the signals to be routed into a digital controller after appropriate level and timing checks. Cable length, baud rate, termination, shield handling, and fault tolerance remain application-specific and should be validated with the MC3487 interface.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC3486N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC3486NG4 | MC3486 | DS3486N | SN75ALS175N | AM26LS32ACN |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Receiver Channels | 4 | 4 | 4 | 4 | 4 | 4 |
Principaux différenciateurs
- Four independent differential channels in one 16-pin PDIP device (vs SN75176BD)
- TTL-compatible outputs with per-channel high-impedance state (vs SN75175DR)
- MC3487 companion-driver alignment (vs AM26LS32ACN)
Notes de conception
Use the MC3486 as part of a balanced differential link rather than treating each receiver input as an isolated single-ended signal. Route the pair with controlled impedance, keep the pair geometry consistent, and verify common-mode voltage, noise margin, and receiver thresholds against the official datasheet. The verified material identifies TIA/EIA-422-B, TIA/EIA-423-B, and ITU V.10/V.11 compatibility, but cable length and data-rate margins remain system-dependent.
Place the receiver close to the connector or cable entry and keep the differential pair away from switching nodes, clocks, and high-current return paths. Provide a solid ground reference, use short return connections, and follow the manufacturer package pinout and recommended decoupling arrangement. The verified data confirms a 16-pin PDIP package and four independent receiver channels but does not provide a complete PCB reference layout, so use the manufacturer datasheet for final placement guidance.
Do not substitute a related receiver solely because the part is described as a quadruple differential receiver. Confirm package, pin names, supply voltage, input thresholds, output-state control, temperature range, and lifecycle status before replacement. SN75176, SN75175, and AM26LS32-family devices may offer related functionality, but the provided comparison data does not prove pin-for-pin equivalence with MC3486N.
Informations de conformité
The verified snippets identify ANSI TIA/EIA and ITU interface standards but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for MC3486N.