MC908EY8AMFJE - 8KB Flash HC08 8-Bit MCU, 32-LQFP | NXP
Référence : MC908EY8AMFJE ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.8 | $980,00 |
| 500 | $8.4 | $4 200,00 |
| 1 000 | $7.1 | $7 100,00 |
MC908EY8AMFJE Présentation
An 8-bit microcontroller (MCU) is a microprocessor core that processes data 8 bits at a time, typically used in embedded systems where low cost, deterministic timing, and peripheral integration outweigh raw compute throughput. Within the broader semiconductor hierarchy, an 8-bit MCU sits below a microcontroller family (HC08 -> Freescale/NXP HC -> 8-bit embedded controller -> integrated circuit). The HC08 core pioneered modern flash-friendly 8-bit designs and remains widely deployed in long-life automotive and industrial platforms where software stability across decades matters more than performance benchmarking.
Key features of the MC908EY8AMFJE include two 16-bit 2-channel timers (TIMA and TIMB) with PWM, a serial peripheral interface (SPI), a serial communications interface (SCI), power-on reset (POR), low-voltage inhibit (LVI), and an internal clock generator that eliminates the external crystal in many designs. The Flash memory supports in-application reprogramming via the built-in monitor ROM, simplifying field firmware updates.
The MC908EY8AMFJE uses the M68HC08 instruction set with a von Neumann bus architecture and an internal bus frequency up to 8 MHz at 5V, giving roughly 1 MIPS of integer throughput. The ICG module provides a stable internal reference and supports trimming for accuracy, removing an external resonator in cost-driven designs. The 24 GPIO pins are multiplexed with timer, SCI, SPI, and interrupt functions.
Typical applications include automotive body controllers, instrument clusters, HVAC flap and blower control, seat and mirror actuators, simple sensor interfaces, and low-end consumer appliances where LIN or SCI network connectivity is required.
When designing with this part, note that the part is now marked Obsolete by NXP; long-life production systems should qualify a successor such as the S08 family. Ensure supply decoupling follows the datasheet's recommended 100 nF + bulk capacitor placement near the VDD pins.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer datasheet page, including cross-brand cross-references validated against the Verified Web Data set.
Alternatives de remplacement direct pour MC908EY8AMFJE — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC908EY8AMFJE (même facteur de forme et même empreinte) — différant par Peripherals, Program Memory Size, RAM Size, Supply Voltage, EEPROM Size.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC908EY16AMFJE
✅ Remplacement direct✓ En stock
$5.2 / unité
Voir la fiche technique →MC908EY8ACFJE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC908EY8CFAE
✅ Remplacement direct✓ En stock
$4.61 / unité
Voir la fiche technique →MC68HC908EY8AMFJE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC908AP32ACFQE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC908EY8AMFJE Valeurs maximales et caractéristiques électriques
| Core Processor | HC08 |
| Core Size | 8-bit |
| Program Memory Size | 8 KB (8K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 512 B (512 x 8) |
| EEPROM Size | Not present |
| Number of I/O | 24 |
| Fréquence d'horloge maximale | 8 MHz internal bus |
| Connectivity | LINbus, SCI, SPI |
| Peripherals | POR, PWM, LVI |
| Timers | 2 x 16-bit, 2-channel (TIMA, TIMB) with PWM |
| Oscillator Type | Internal (ICG) |
| Boîtier / Format | 32-LQFP (7x7 mm) |
| Type de montage | Surface Mount |
| Packaging | Tray |
| Series | HC08 |
| Operating Voltage | 5 V typical |
Configuration des broches de MC908EY8AMFJE
| Broche 1 | PTA0/TCLK — Port A bit 0 / Timer A clock input |
| Broche 2 | PTA1 — Port A bit 1 |
| Broche 3 | PTA2 — Port A bit 2 |
| Broche 4 | PTA3 — Port A bit 3 |
| Broche 5 | PTA4 — Port A bit 4 |
| Broche 6 | PTA5 — Port A bit 5 |
| Broche 7 | VSS — Ground |
| Broche 8 | VDD — Power supply |
| Broche 9 | PTB0 — Port B bit 0 |
| Broche 10 | PTB1 — Port B bit 1 |
| Broche 11 | PTB2 — Port B bit 2 |
| Broche 12 | PTB3 — Port B bit 3 |
| Broche 13 | PTB4 — Port B bit 4 |
| Broche 14 | PTB5 — Port B bit 5 |
| Broche 15 | PTC0 — Port C bit 0 |
| Broche 16 | PTC1 — Port C bit 1 |
| Broche 17 | PTC2 — Port C bit 2 |
| Broche 18 | PTC3 — Port C bit 3 |
| Broche 19 | PTC4 — Port C bit 4 |
| Broche 20 | PTC5 — Port C bit 5 |
| Broche 21 | PTD0/RxD — Port D bit 0 / SCI receive |
| Broche 22 | PTD1/TxD — Port D bit 1 / SCI transmit |
| Broche 23 | PTD2/MISO — Port D bit 2 / SPI MISO |
| Broche 24 | VDD — Power supply (second VDD) |
| Broche 25 | VSS — Ground (second VSS) |
| Broche 26 | PTD3/MOSI — Port D bit 3 / SPI MOSI |
| Broche 27 | PTD4/SPSCK — Port D bit 4 / SPI clock |
| Broche 28 | PTD5/ICGOUT — Port D bit 5 / ICG output |
| Broche 29 | RST — Reset input (active low) |
| Broche 30 | IRQ — External interrupt request |
| Broche 31 | OSC1 — Crystal oscillator input |
| Broche 32 | OSC2 — Crystal oscillator output |
Applications typiques
MC908EY8AMFJE convient pour 6 applications: Automotive Body Controller, HVAC Flap and Blower Control, Instrument Cluster Indicator, Seat and Mirror Actuator Module, Industrial Sensor Interface Node, Low-End Consumer Appliance Controller.
Automotive Body Controller
The MC908EY8AMFJE suits automotive body modules because its LINbus connectivity, 24 GPIO pins, and two 16-bit PWM timers can drive lamp, wiper, and door-lock actuators. With 8 KB of Flash and 512 B RAM it fits cost-sensitive nodes running a small RTOS or simple scheduler, while the internal clock generator eliminates a crystal to reduce BOM cost. The integrated LVI module prevents code corruption during crank-and-start brown-out events.
Recommandé
HVAC Flap and Blower Control
HVAC modules use the MC908EY8AMFJE to drive mixed-air stepper or DC blower motors through the integrated PWM timers and 24 GPIOs. The SCI peripheral interfaces with the HVAC control panel, while the 8 KB Flash easily fits typical flap control tables. The internal ICG keeps the bill of materials low, and the small LQFP-32 package simplifies the compact module housing used behind the dashboard.
Recommandé
Instrument Cluster Indicator
The MC908EY8AMFJE powers low-end instrument cluster sub-displays where it reads sensor inputs via the ADC channels, drives LEDs via PWM, and serial-links to the main cluster MCU over SCI. The 8 MHz internal bus and 512 B RAM are sufficient for indicator control, while the LINbus support enables keypad backlighting and telltale sharing. The Flash memory supports in-field firmware updates through the monitor mode bootloader.
Recommandé
Seat and Mirror Actuator Module
Body-electronics seat and mirror modules rely on the MC908EY8AMFJE's PWM channels to control motor speed and direction through external H-bridge drivers. The 24 GPIO pins are multiplexed to read position switches and Hall sensors while SPI/SCI handles communication with the body controller. AEC-qualified temperature grades and the small LQFP footprint are well matched to the under-seat and door-mirror mechanical envelope.
Recommandé
Industrial Sensor Interface Node
Industrial sensor hubs use the MC908EY8AMFJE to aggregate analog sensor data, perform basic linearization in firmware, and forward the result to a master PLC over SCI or LIN. The 8 KB Flash and 512 B RAM cover compact signal-conditioning code, while two 16-bit timers handle PWM excitation for ratiometric sensors. The internal ICG and integrated LVI simplify the power architecture in 24 V industrial environments.
Recommandé
Low-End Consumer Appliance Controller
The MC908EY8AMFJE fits small kitchen and white-goods controllers where 8-bit throughput is adequate for user-input handling, indicator LED driving, and a UART link to an inverter or display. The integrated PWM channels control simple brushless or brushed DC loads, while the 8 KB Flash easily accommodates state-machine control firmware. The small 32-LQFP package and the internal clock generator minimize BOM cost in mass-market appliances.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC908EY8AMFJE — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC908EY16AMFJE | MC908EY8ACFJE | MC908EY8CFAE | MC68HC908EY8AMFJE | MC908AP32ACFQE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same | 32-LQFP - same |
| Core | HC08 8-bit | HC08 8-bit | HC08 8-bit | HC08 8-bit | HC08 8-bit | HC08 8-bit |
| Program Memory (Flash) | 8 KB | 16 KB | 8 KB | 8 KB | 8 KB | 32 KB |
| RAM | 512 B | 512 B | 512 B | 512 B | 512 B | 1 KB |
| Maximum Clock | 8 MHz internal bus | 8 MHz internal bus | 8 MHz internal bus | 8 MHz internal bus | 8 MHz internal bus | 8 MHz internal bus |
| GPIO Count | 24 | 24 | 24 | 24 | 24 | 32 |
| Connectivity | LINbus, SCI, SPI | LINbus, SCI, SPI | LINbus, SCI, SPI | LINbus, SCI, SPI | LINbus, SCI, SPI | SCI, SPI |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principaux différenciateurs
- Integrated LINbus connectivity in a 32-LQFP 8-bit MCU (vs MC908AP32ACFQE)
- Internal clock generator eliminates external crystal (vs Older HC908JL/JK families)
- Two 16-bit PWM timers with 2 channels each (vs MC908AP32ACFQE)
Notes de conception
Decouple each MC908EY8AMFJE VDD pin with a 100 nF ceramic capacitor placed within 5 mm of the package pin, plus a bulk 4.7 uF tantalum or aluminum-polymer cap on the board supply rail. The dual VDD pins (pin 8 and pin 24) and dual VSS pins (pins 7 and 25) must each be connected - floating either pin can cause logic errors during transitions. Tie RST high through a 10 kohm pull-up with a 1 nF capacitor to ground for clean POR behavior.
Do not rely on the internal ICG for tight UART baud rates - the trim accuracy is typically +/-2% and drifts over temperature. For SCI baud rates above 9600 bps or for LIN bus timing, switch to an external ceramic resonator on OSC1/OSC2 (pins 31 and 32). Also note the monitor ROM is enabled by default on the EY8 - disable it for production firmware or unwanted entry into monitor mode can occur if PTA0 is held low at reset.
Estimated: At maximum 8 MHz bus activity across all peripherals, supply current is approximately 15 mA, so dissipation on a 5 V supply is around 75 mW. The 32-LQFP (7x7 mm) package has a theta_JA of approximately 65 C/W on a 2-layer board, giving a 5 C rise above ambient. No heatsink is required; however, keep the part away from high-power MOSFETs and consider thermal vias if used in a sealed enclosure.
Informations de conformité
Compliance information not retrieved by the verified web data set; users should request the latest NXP material declaration before committing to production.