MC9S08PL32CLC - 8-Bit 20MHz 32KB Flash MCU | NXP 32-LQFP
Référence : MC9S08PL32CLC ✓ ActifMC9S08PL32CLC Présentation
An 8-bit microcontroller (MCU) is a small, single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a set of peripherals such as timers, ADC and communication interfaces on one die. The S08 family sits in the 8-bit MCU hierarchy below 32-bit Cortex-M parts but above simple hardware controllers: S08 -> HCS08 core -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The S08PL line in particular emphasises 5 V I/O tolerance, integrated EEPROM and strong EFT/ESD performance for harsh environments.
Key features include 4 KB SRAM, a 10-bit ADC with multiple channels, an analog comparator, flexible timers (including TPM and PWT), and a 20 MHz bus clock derived from an internal clock source. The MCU operates from 2.7 V to 5.5 V and supports industrial-grade ambient temperatures. The 32-LQFP footprint exposes up to 28 general-purpose I/O pins and integrates an SCI/UART plus SPI and I2C communication channels.
The S08 architecture uses a von-Neumann bus with an HCS08 enhanced instruction set, including multiply and divide, and a BDM (Background Debug Mode) interface for in-circuit programming and debug. Internal EEPROM emulates data-logging or user-configuration storage without external serial memory, and the 10-bit ADC supports both scan and single conversion modes.
Typical applications include white-goods and small home appliances, low-end motor control (BLDC, PMSM, brushed DC), lighting controls, user-interface boards, and battery-operated 5 V industrial sensors. The 5 V tolerance makes it a clean replacement for legacy 5 V designs that need extra Flash headroom.
When designing, route the VDDA/VSS analog pair separately from the digital supply to preserve ADC accuracy, and follow NXP's S08PL reference manual for layout. The internal EEPROM is rated for a finite endurance; structure writes carefully to avoid premature wear.
This page synthesises distributor pricing, drop-in NXP S08PL/S08PA family alternatives and practical design notes not collected on a single OEM page.
Alternatives de remplacement direct pour MC9S08PL32CLC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08PL32CLC (même facteur de forme et même empreinte) — différant par Package, ADC, Analog Comparator, Core, Flash Memory.
MC9S08PL16CLC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MC9S08PL8CLC
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MC9S08PA32VLC
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08PA16VLC
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MC9S08AW32CPUE
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MC9S08PL32CLC Valeurs maximales et caractéristiques électriques
| Core | HCS08L (S08) |
| Largeur du bus de données | 8 bit |
| Fréquence d'horloge maximale | 20 MHz |
| Program Memory Size | 32 KB (32K x 8) Flash |
| RAM Size | 4 KB |
| EEPROM Size | 256 B |
| Supply Voltage Range | 2.7 V to 5.5 V |
| ADC | 10-bit |
| Analog Comparator | Yes (internal) |
| Communication Interfaces | SCI (UART), SPI, I2C |
| Timers | TPM, PWT, RTC |
| I/O Pins | Up to 28 GPIO |
| Température de fonctionnement | -40C to +85C (industrial) |
| Boîtier | 32-LQFP (7x7 mm) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
| EFT/ESD Performance | Enhanced (per NXP S08PL family spec) |
Configuration des broches de MC9S08PL32CLC
| Broche 1 | PTC0 — General-purpose I/O / analog input |
| Broche 2 | PTC1 — General-purpose I/O / analog input |
| Broche 3 | PTC2 — General-purpose I/O / analog input |
| Broche 4 | PTC3 — General-purpose I/O / analog input |
| Broche 5 | VSS — Digital ground |
| Broche 6 | VDD — Digital supply 2.7-5.5 V |
| Broche 7 | PTB0 — Port B bit 0 / TPM channel |
| Broche 8 | PTB1 — Port B bit 1 / TPM channel |
| Broche 9 | PTB2 — Port B bit 2 / TPM channel |
| Broche 10 | PTB3 — Port B bit 3 / TPM channel |
| Broche 11 | PTB4 — Port B bit 4 / SPI |
| Broche 12 | PTB5 — Port B bit 5 / SPI |
| Broche 13 | PTB6 — Port B bit 6 / I2C SDA |
| Broche 14 | PTB7 — Port B bit 7 / I2C SCL |
| Broche 15 | PTA0 — Port A bit 0 / TPM |
| Broche 16 | PTA1 — Port A bit 1 / TPM |
| Broche 17 | PTA2 — Port A bit 2 / SCI TX |
| Broche 18 | PTA3 — Port A bit 3 / SCI RX |
| Broche 19 | PTA4 — Port A bit 4 |
| Broche 20 | PTA5 — Port A bit 5 |
| Broche 21 | PTA6 — Port A bit 6 |
| Broche 22 | PTA7 — Port A bit 7 |
| Broche 23 | VDDA — Analog supply |
| Broche 24 | VSSA — Analog ground |
| Broche 25 | PTD0 — Port D bit 0 / comparator |
| Broche 26 | PTD1 — Port D bit 1 / comparator |
| Broche 27 | PTD2 — Port D bit 2 |
| Broche 28 | PTD3 — Port D bit 3 |
| Broche 29 | RESET — Active-low reset input |
| Broche 30 | BKGD — Background debug mode |
| Broche 31 | VSS — Digital ground |
| Broche 32 | VDD — Digital supply |
Applications typiques
MC9S08PL32CLC convient pour 6 applications: White Goods and Home Appliance Control, Low-End BLDC and Brushed DC Motor Control, Lighting Control and LED Drivers, User Interface Boards with Keypad and LCD, Battery-Powered Industrial Sensors, Consumer Toys and Educational Electronics.
White Goods and Home Appliance Control
The MC9S08PL32CLC is well matched to white-goods control boards (washing machines, dishwashers, refrigerators) thanks to its 5 V native I/O, integrated EEPROM for user settings and 10-bit ADC for sensor readout. The 20 MHz HCS08L core executes appliance state machines with ample headroom for UI handling, while the 32-LQFP footprint exposes enough GPIO for relay triac drivers and keypad scanning. Compared with switching to a 3.3 V Cortex-M0+, the S08PL eliminates level shifters for legacy 5 V triac interfaces and reduces BOM cost.
Recommandé
Low-End BLDC and Brushed DC Motor Control
For fans, pumps and small drives the MC9S08PL32CLC provides TPM centre-aligned PWM, an analog comparator for BEMF zero-crossing detection, and a 10-bit ADC for current shunt sampling. The 20 MHz core closes single-shunt sensorless BLDC loops in real time without DSP overhead. The 32-LQFP package supports 6-step or FOC firmware variants and the 5 V I/O domain directly drives gate-driver logic. This is the same architecture used in NXP's reference designs for 24 V appliance motors.
Recommandé
Lighting Control and LED Drivers
Dimmable LED controllers and DMX512-compatible lighting nodes benefit from the MC9S08PL32CLC's PWM timer, SCI/UART for DMX and EEPROM for storing calibration constants. With 4 KB RAM the MCU can buffer DMX frames and run software PWM at 8 kHz refresh without flicker. The integrated ADC monitors supply current and temperature for adaptive thermal fold-back, while the 5 V tolerance allows direct connection to commercial lighting bus transceivers.
Recommandé
User Interface Boards with Keypad and LCD
Appliance user-interface boards combining keypad scanning, segment LCD driving and buzzer control deploy the MC9S08PL32CLC because its GPIO count, timer-driven segment multiplex and EEPROM storage fit in a single chip. The S08PL supports software-driven LCD charge-pump timing and matrix keypad scanning with interrupt-on-change wakeup. The 32-LQFP keeps board area under 10x10 mm, leaving room for the LCD glass and connectors.
Recommandé
Battery-Powered Industrial Sensors
Industrial 4-20 mA loop sensors and 5 V battery monitors use the MC9S08PL32CLC's low-power run modes plus 10-bit ADC for accurate readings. Stop and wait modes drop current to the single-digit microamp range for long-life primary-cell designs, and the on-chip EEPROM retains calibration even when the battery is removed. The 5 V tolerance interfaces directly with 4.5 V industrial transducers without external regulators.
Recommandé
Consumer Toys and Educational Electronics
Cost-sensitive consumer toys, robotics kits and STEM learning platforms adopt the MC9S08PL32CLC for its 5 V I/O that drives hobby servos and DC motors directly, and for its generous 32 KB Flash for application code and audio samples. The 32-LQFP hand-solders cleanly on a 0.8 mm pitch, easing prototype rework, while the BDM port allows educators to demonstrate in-circuit debug.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08PL32CLC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08PL16CLC | MC9S08PL8CLC | MC9S08PA32VLC | MC9S08PA16VLC | MC9S08AW32CPUE |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP - same | 32-LQFP - same | 32-LQFP - same | 32-LQFP - same | 64-LQFP - different pin count |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS08L @ 20 MHz | HCS08L @ 20 MHz | HCS08L @ 20 MHz | HCS08A @ 20 MHz | HCS08A @ 20 MHz | HCS08AW @ 40 MHz |
| Flash | 32 KB | 16 KB (-50%) | 8 KB (-75%) | 32 KB (same) | 16 KB (-50%) | 32 KB (same) |
| RAM | 4 KB | 1 KB | 1 KB | 4 KB | 2 KB | 2 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B | 0 B (Flash-emulated) |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| ADC | 10-bit | 10-bit | 10-bit | 12-bit | 12-bit | 10-bit |
| GPIO (max) | 28 | 28 | 28 | 28 | 28 | 56 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +105C | -40C to +85C |
Principaux différenciateurs
- 5 V native I/O with integrated EEPROM (vs STM8S003F3 (3.3 V))
- Larger Flash than price-tier siblings (vs MC9S08PL16CLC)
- Pin-compatible upgrade path to PA family (vs MC9S08PL8CLC)
Notes de conception
Estimated: at VDD=5 V with all peripherals active the S08PL core draws ~10 mA plus GPIO drive; adding decoupling 100 nF X7R at each VDD/VSS pin pair within 3 mm of the package suppresses switching noise. For motor-control boards using the same 5 V rail for gate drivers, place a ferrite bead between the MCU VDD and the noisy half-bridge supply to protect the ADC readings.
Route the VDDA/VSSA pair as a Kelvin connection to the supply, keeping the analog ground island small and tying it to digital ground at a single point near the MCU. Avoid routing high-di/dt signals (PWM outputs, triac drivers) across the analog section to preserve the 10-bit ADC SNR. Leave the BKGD/MS pin accessible with a 2x5 header footprint for production programming.
Do not write the internal EEPROM more frequently than the rated endurance budget (~100k cycles per sector) - structure parameter writes with wear-leveling or buffered commit patterns to extend lifetime. The reset pin has an internal pull-up but external noise can still couple in; add a 100 nF cap to ground and a 10 kohm pull-up for harsh-industrial environments. Watch the S08PL I/O injection current limit - exceeding it on any pin can trigger latch-up.
Estimated: the 32-LQFP has theta-JA around 70 C/W on a 4-layer 1-oz PCB; at 10 mA VDD=5 V the dissipation is ~50 mW, giving <4 C temperature rise. Even at extended industrial ambient 85 C the junction stays well below 125 C, so no heatsink is required. Reduce ambient for closed-enclosure appliance designs where internal self-heating adds another 10-15 C.
Informations de conformité
RoHS and lead-free per NXP product page. Not AEC-Q100 qualified; for automotive consider S12/S08 automotive-grade siblings. Enhanced EFT/ESD per NXP S08PL family claim.