MCF52232CAF50 - 32-Bit 50MHz 128KB MCU | NXP
Référence : MCF52232CAF50 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
MCF52232CAF50 Présentation
A ColdFire microcontroller is a 32-bit embedded processor based on a RISC architecture. It combines processor core, Flash, SRAM, peripherals, communication interfaces, timers, and interrupt-control resources in one integrated circuit. The MCF52232CAF50 belongs to the NXP MCF5223x family, whose family members are identified as pin-to-pin compatible within like packages.
The verified distributor listing identifies the device as a ColdFire V2 MCU with a 32-bit data-bus width, 50 MHz maximum frequency, 128 KB Flash, 16 KB SRAM, and an 80-pin LQFP package measuring 14 x 14 mm. The NXP product page also identifies the Ethernet interface as part of the MCF5223x feature set.
The family information supplied by NXP indicates that MCF52231 adds a CAN module, MCF52233 adds 128 KB of Flash, MCF52234 adds both CAN and 128 KB of Flash, and MCF52235 adds a cryptographic acceleration unit, CAN, and 128 KB of Flash. This makes family selection important: the exact variant determines the communication and security feature set.
Use the MCF52232CAF50 when a design needs a 50 MHz 32-bit control platform with 128 KB of Flash and an Ethernet-oriented peripheral set. Validate the exact package pinout, supply requirements, peripheral availability, memory map, and timing constraints against the manufacturer documentation before layout or firmware deployment.
For PCB design, preserve the manufacturer-recommended LQFP land pattern, provide clean decoupling near the device, route high-speed signals with controlled impedance where applicable, and confirm exposed-pad or thermal requirements from the full datasheet. Programming, clocking, reset, and peripheral configuration should follow the NXP device documentation rather than assumptions based on another MCU family.
This page consolidates verified distributor specifications, NXP family compatibility information, and practical sourcing guidance. It distinguishes the target device from pin-compatible family alternatives and identifies engineering details that still require confirmation from the official datasheet.
Alternatives de remplacement direct pour MCF52232CAF50 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MCF52232CAF50 (même facteur de forme et même empreinte) — différant par Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MCF52236AF50
✅ Remplacement direct✓ En stock
$9.18 / unité
Voir la fiche technique →MCF52231CAF50
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCF52233CAF50
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCF52234CAF50
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCF52235CAF50
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCF52232CAF50 Valeurs maximales et caractéristiques électriques
| Core | ColdFire V2 |
| Processor architecture | RISC |
| Largeur du bus de données | 32 bit |
| Fréquence d'horloge maximale | 50 MHz |
| Flash memory | 128 KB |
| SRAM | 16 KB |
| Ethernet interface | Present |
| Boîtier | 80-pin LQFP |
| Package dimensions | 14 x 14 mm |
| Type de montage | Surface mount |
| Device category | Microcontroller |
| Manufacturer product family | MCF5223x |
| Family pin compatibility | Pin-to-pin compatible within like MCF5222x packages |
| Statut RoHS | unknown |
| REACH status | unknown |
| AEC-Q100 status | not_applicable |
Guide de configuration des broches du MCF52232CAF50 14 x 14 mm
Configuration des broches du MCF52232CAF50 (boîtier 14 x 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MCF52232CAF50.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MCF52232CAF50 convient pour 6 applications: Networked industrial control, Ethernet-connected embedded equipment, Motor and actuator control, Building automation gateway, Consumer networking appliance, Data acquisition and supervisory control.
Networked industrial control
The MCF52232CAF50 fits embedded industrial controllers that need 32-bit local processing and Ethernet connectivity in one device. Its verified 50 MHz ColdFire V2 core provides deterministic control headroom, while 128 KB of Flash supports firmware, configuration, and protocol tables. The 80-pin LQFP package provides a defined surface-mount footprint for industrial controller boards. Validate the Ethernet PHY interface, isolation requirements, operating temperature, EMC performance, and watchdog strategy in the complete system design.
Recommandé
Ethernet-connected embedded equipment
Use MCF52232CAF50 when equipment needs local control logic plus an Ethernet interface without a separate high-performance communications processor. The verified 32-bit ColdFire V2 core runs at 50 MHz, and the device includes 128 KB of Flash for embedded networking firmware and 16 KB of SRAM for working state. In a typical design, the MCU handles protocol processing, supervisory logic, and local I/O while an external PHY provides the physical Ethernet layer. Confirm PHY interface details, timing, and isolation from the NXP documentation.
Recommandé
Motor and actuator control
The MCF52232CAF50 can serve as the supervisory controller in a motor or actuator system because it combines a 50 MHz 32-bit core with on-chip Flash and SRAM. The controller can execute sequencing, position or speed logic, fault handling, and communications while external drivers handle power conversion. Its suitability depends on the exact timer, PWM, ADC, and fault-timer resources of the selected device variant, so consult the full pin and peripheral tables. Add external protection and isolation where required by the motor environment.
Recommandé
Building automation gateway
MCF52232CAF50 is a reasonable candidate for a building-automation gateway that coordinates sensors, actuators, and network services. The 50 MHz ColdFire V2 core can handle protocol tasks and control logic, while 128 KB of Flash provides space for firmware and configuration data. The Ethernet capability aligns with wired building-network designs. A production design should define low-power behavior, brownout handling, watchdog operation, EMI filtering, and connector protection; those requirements are not quantified in the supplied search data.
Recommandé
Consumer networking appliance
The MCF52232CAF50 can support embedded networking appliances that need a compact control processor, local configuration, and Ethernet communication. Its verified 32-bit architecture and 50 MHz clock are useful for protocol handling, state machines, diagnostics, and user-interface support without using a separate host processor. The 80-pin LQFP package simplifies assembly into a leaded surface-mount board, but the designer must confirm Ethernet magnetics or PHY implementation, power budget, boot behavior, and software support before selecting it for a consumer product.
Recommandé
Data acquisition and supervisory control
MCF52232CAF50 can act as a supervisory controller in data-acquisition equipment where local sequencing, communications, and control logic must coexist in one MCU. The 50 MHz core provides processing headroom for protocol management and system tasks, and 128 KB of Flash supports embedded application code. External precision converters and sensors may be connected through the device’s available peripherals, but the supplied data does not identify exact ADC, timer, or I/O specifications. Those resources must be verified before assigning analog channels or timing-critical sampling functions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MCF52232CAF50 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MCF52236AF50 | MCF52231CAF50 | MCF52233CAF50 | MCF52234CAF50 | MCF52235CAF50 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP | 80-pin LQFP |
| Core | ColdFire V2 | ColdFire family variant | ColdFire family variant | ColdFire family variant | ColdFire family variant | ColdFire family variant |
Principaux différenciateurs
- Target-specific resource baseline (vs MCF52236AF50)
- Known family feature distinctions (vs MCF52235CAF50)
- Communication-feature differentiation (vs MCF52231CAF50)
- Pin-compatible family positioning (vs MCF52233CAF50)
Notes de conception
Use the exact 80-pin LQFP land pattern and pin numbering from the NXP package drawing. Do not substitute a generic LQFP footprint based only on body size, because lead pitch, pin numbering, solder-mask clearance, and exposed thermal-pad requirements must match the selected package. Confirm the package drawing and manufacturing capability before releasing the PCB footprint.
Place all required decoupling capacitors at the locations specified by the NXP datasheet and keep supply traces short and low-impedance. The supplied search data does not state the device’s operating voltage or current limits, so do not select capacitors, regulators, or power planes by inference. Verify power-up, brownout, reset, and sequencing requirements against the official electrical specifications.
If the Ethernet interface is used, validate the controller-to-PHY interface, clocking, reset, impedance, and connector path with the board-level design rules of the selected PHY and NXP documentation. Keep sensitive clocks and communication routes away from noisy switching nodes. The supplied data confirms Ethernet family positioning but does not provide pin-level routing or timing values.
Estimate board temperature from actual processor dissipation and the package’s thermal characteristics using the manufacturer’s recommended layout. Do not rely on a nominal 50 MHz clock as a thermal rating, and do not use the online snippets as a substitute for maximum junction temperature or power limits. Validate with a thermal chamber or equivalent test when the enclosure limits airflow.
Family compatibility is not enough to approve a substitution. Verify device variant, package suffix, pin multiplexing, boot configuration, Flash organization, SRAM, peripherals, voltage, clock sources, and firmware support. The verified NXP page specifically notes feature differences among MCF52231, MCF52233, MCF52234, and MCF52235, so a family-level pin compatibility statement should not erase those differences.
Informations de conformité
The supplied search data does not provide verified RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for MCF52232CAF50. Compliance must be confirmed with NXP or the authorized distributor. AEC-Q100 is marked not_applicable because the supplied data does not identify an automotive-qualified variant.
