MCP2515-I/STVAO - SPI CAN 2.0B Controller | Microchip
Référence : MCP2515-I/STVAO ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
MCP2515-I/STVAO Présentation
A stand-alone CAN controller connects a host processor to a CAN physical bus through a separate CAN transceiver. CAN is a deterministic, arbitration-based communication network used when message priority, robust framing, and reliable multi-node operation matter. In the hierarchy, the MCP2515 belongs to the CAN controller class, within interface controllers and broader semiconductor communication devices.
Key features include faster throughput than the earlier MCP2510, programmable data-byte filtering, acceptance-filter optimization, dual full masks, interrupt sources for receive, transmit, error, and wake-up activity, and support for time-triggered protocols. According to the manufacturer product page, the device is also pin and function compatible with the MCP2510. Standard and extended identifiers allow a design to support both conventional and extended CAN message formats.
The MCP2515 separates protocol handling from bus-line voltage conversion. Its SPI port communicates with a host MCU or processor, while CANRX and CANTX connect to an external transceiver. This makes the device appropriate for industrial automation, robotics, vehicle instrumentation, medical equipment, embedded control, and test systems where the system already has a transceiver and host controller.
Typical implementation uses an MCU connected by SPI to the MCP2515, a 3.3 V or 5 V CAN transceiver, common reference ground, and a correctly terminated CAN bus. Decoupling capacitors should be placed close to the VDD pins, and the SPI and interrupt traces should be kept short to reduce timing and signal-integrity risk.
This page combines manufacturer specifications, verified distributor findings, package information, application guidance, and replacement-analysis evidence. The supplied data confirms the 20-TSSOP package and 2.7 V to 5.5 V operating range; unspecified electrical limits, register details, lifecycle declarations, pricing, and full pin names are intentionally not invented.
Alternatives de remplacement direct pour MCP2515-I/STVAO — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MCP2515-I/STVAO (même facteur de forme et même empreinte) — différant par Package, Frame Support.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MCP2515-E/STVAO
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MCP2515T-E/STVAO
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCP2515-I/SOVAO
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MCP2515-I/STVAO Spécifications
| Product Type | Stand-alone CAN controller |
| CAN Protocol | CAN 2.0B |
| Host Interface | SPI |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Maximum Bitrate | 1 Mbit/s |
| Frame Support | Standard, extended, and remote frames |
| Message Buffer | 2 KB |
| Boîtier | 20-pin TSSOP, 0.65 mm pitch |
| Temperature Grade | Industrial |
| Terminal Count | 20 terminals |
| Package Code | STVAO |
| Type de montage | Surface mount |
| Controller Count | 1 CAN controller |
| MCP2510 Compatibility | Pin and function compatible |
| Data-Byte Filtering | Supported |
| Time-Triggered Protocol Support | Supported |
Guide de configuration des broches du MCP2515-I/STVAO stvao
Configuration des broches du MCP2515-I/STVAO (boîtier stvao). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MCP2515-I/STVAO.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MCP2515-I/STVAO convient pour 6 applications: Industrial Automation Controller, Robotics and Motion Control, Automotive and Vehicle Instrumentation, Medical and Diagnostic Equipment, Embedded Test and Measurement, Smart Sensor and IoT Gateway.
Industrial Automation Controller
The MCP2515-I/STVAO fits an industrial automation node that must exchange prioritized machine commands and sensor status over CAN. Its CAN 2.0B implementation supports standard and extended frames, while the SPI interface connects cleanly to an embedded MCU or PLC-adjacent processor. At bitrates up to 1 Mbit/s, it can serve factory equipment where deterministic arbitration is useful. An external transceiver is still required for CANH and CANL, and the design should follow the official data sheet for termination, filter configuration, and electrical limits.
Recommandé
Robotics and Motion Control
Use MCP2515-I/STVAO in a robot or motion-control system when distributed motor, sensor, and safety-state messages require a deterministic CAN network. The controller’s acceptance filters help the host reject irrelevant traffic, while up-to-1 Mbit/s operation supports higher-rate command and feedback traffic. SPI keeps the host-side implementation straightforward on a microcontroller such as an STM32F103VET6 or ATMEGA2560V-8CU. Add a suitable transceiver such as an SN65HVD231DR when the bus is 3.3 V, and verify timing and termination on the assembled PCB.
Recommandé
Automotive and Vehicle Instrumentation
The MCP2515-I/STVAO can support vehicle instrumentation and body electronics prototypes that need a host MCU to access CAN messages through SPI. Standard and extended frame support accommodates different identifier formats, and the industrial-temperature order code is identified in the verified product listing. Because this part is a controller rather than a transceiver, the PCB must include an appropriately selected automotive or industrial CAN physical-layer device, protection network, and bus termination. Confirm AEC-Q100 status and full electrical requirements from Microchip before production use.
Recommandé
Medical and Diagnostic Equipment
MCP2515-I/STVAO is suitable for medical or diagnostic equipment modules that need reliable multi-node communication between sensors, control boards, and a supervisory processor. CAN arbitration gives defined priority when multiple nodes transmit, while SPI provides a compact host connection for embedded firmware. The controller can be paired with a host MCU and an external transceiver, with isolation and protection implemented according to the system safety and EMC requirements. The verified data does not establish medical qualification, so compliance, isolation, and electrical validation must be handled at the system level.
Recommandé
Embedded Test and Measurement
The MCP2515-I/STVAO can serve as the CAN communication engine in test equipment, data-acquisition systems, and programmable instrumentation. A host processor can configure acceptance filters and transmit test commands through SPI, while an external transceiver connects the controller to the equipment network. The 2.7 V to 5.5 V range supports common embedded supply plans, and the 20-TSSOP package keeps the controller compact. Use the family data sheet to verify timing margins, interrupt behavior, and transceiver logic levels for each instrument platform.
Recommandé
Smart Sensor and IoT Gateway
MCP2515-I/STVAO is useful in a gateway that aggregates sensor data from multiple CAN nodes before forwarding it to a higher-level processor. Data-byte filtering and configurable acceptance masks can reduce host workload by rejecting messages that are not relevant to the gateway. The SPI interface is compatible with common embedded controllers, and the 20-TSSOP package supports compact boards. A separate transceiver is mandatory, and the bus must be isolated or protected appropriately for the deployment environment. Confirm filter, interrupt, and timing details against the official family data sheet.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MCP2515-I/STVAO — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MCP2515-E/STVAO | MCP2515T-E/STVAO | MCP2515-I/SOVAO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Principaux différenciateurs
- CAN 2.0B controller with broad frame support (vs MCP2517FD-H/SL)
- Directly compatible with the established MCP2510 footprint concept (vs MCP2515-I/SOVAO)
- 20-TSSOP integration matches verified related order codes (vs MCP2515-E/STVAO)
- Filtering and time-triggered protocol support (vs MCP2515-I/SOVAO)
Notes de conception
Place the MCP2515-I/STVAO close to the host MCU and the external CAN transceiver. Keep the SPI traces short, provide a continuous ground reference, and route CANTX/CANRX toward the transceiver rather than directly into the bus connector. The verified package is 20-TSSOP with 0.65 mm pitch, so confirm the land pattern against the official package drawing before release.
Decouple the controller supply locally with capacitors selected according to the official data sheet and the host power plan. The verified operating range is 2.7 V to 5.5 V, but the supplied material does not provide the recommended capacitor values, current limits, or absolute maximum voltage. Do not infer those values from generic CAN designs; use the family data sheet and validate supply sequencing in the assembled board.
Do not connect the MCP2515-I/STVAO controller outputs directly to CANH and CANL. The MCP2515 is a logic-side controller and requires an external transceiver for bus voltage levels and protection. Also verify SPI mode, interrupt polarity, bitrate settings, acceptance filters, and termination against the family data sheet. A package match alone is not sufficient evidence that an order-code variant is a drop-in replacement.
For a high-bitrate CAN design, use the transceiver and transceiver-side layout recommended by its manufacturer, observe the required termination topology, and keep sensitive analog or clock areas away from the CAN RX/TX path. The MCP2515 can support up-to-1 Mbit/s operation, but achievable bus reliability depends on the complete controller-transceiver-cable system rather than the controller alone.
Informations de conformité
The supplied verified extracts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Compliance must be confirmed from the current Microchip product documentation or supplier certificates.
