Microchip Technology

MCP3901A0-I/SS - 24-Bit Dual-Channel AFE | Microchip

Référence : MCP3901A0-I/SS ✓ Actif
Yes Vdss 20-pin SSOP Package
MOQ : 1 |

MCP3901A0-I/SS Présentation

The Microchip MCP3901A0-I/SS is a dual-channel analog front end (AFE) with two synchronous sampling delta-sigma analog-to-digital converters, two programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, and a 20 MHz SPI-compatible serial interface. It supports 16-bit and 24-bit resolution, with an output data rate of up to 64 kSPS and up to 91 dB SINAD according to the manufacturer product page. The device is supplied in the MCP3901A0-I/SS 20-pin SSOP package and is designed for energy-metering and precision analog measurement systems.

An analog front end is an interface block between real-world sensors and a digital controller. In this case, the MCP3901A0-I/SS performs signal conditioning and conversion internally: the delta-sigma ADCs sample the two input channels synchronously, the PGAs amplify low-level signals, and the internal reference reduces the need for external precision references. The resulting measurements can be transferred to a microcontroller or energy-metering system through the high-speed SPI-compatible interface. The architecture is therefore positioned between analog sensing circuitry and digital data processing.

The principal features include two simultaneous sampling channels, selectable 16-bit and 24-bit operating modes, programmable-gain amplification, an internal voltage reference, and a modulator output path. The manufacturer describes the converters as using a proprietary multi-bit delta-sigma architecture with dithering for reduced idle tones and improved total harmonic distortion. The stated performance includes up to 91 dB SINAD and -104 dBc THD up to the 35th harmonic. These characteristics make the device suitable for systems requiring accurate current and voltage measurement in metering equipment.

The MCP3901 family combines analog measurement and digital control in one IC. Its SPI-compatible interface allows a host processor to configure the PGAs, select the conversion and oversampling settings, and retrieve digital results. The phase-delay compensation block is useful when both channel measurements must be aligned for real-power calculations. Because the two converters sample synchronously, the device is well suited to current-and-voltage channel pairs where timing consistency affects the calculated energy or power value.

Typical applications include single-phase energy meters, industrial power-monitoring equipment, smart-grid measurement, current-sensor signal acquisition, and other low-bandwidth precision measurement systems. The internal reference and PGAs can reduce the external analog component count when the signal range is compatible with the selected gain. The 24-bit resolution is useful for extracting small changes from a larger measurement range, while the 64 kSPS maximum output rate supports higher-rate control or monitoring functions.

Designers should pay attention to analog grounding, input filtering, reference behavior, and the relationship between gain, common-mode range, and signal amplitude. The SPI traces should be routed away from high-current switching nodes, and the input network should be designed to limit out-of-band energy before it reaches the delta-sigma converters. The manufacturer datasheet should be used for the complete pin description, electrical limits, timing diagrams, and recommended application circuit.

This page combines the manufacturer MCP3901 documentation with distributor information and organizes the part for engineers comparing precision dual-channel AFEs, energy-metering front ends, and SPI-connected measurement ICs.

Alternatives de remplacement direct pour MCP3901A0-I/SS — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MCP3901A0-I/SS (même facteur de forme et même empreinte) — différant par Package, Phase-Delay Compensation, Programmable Gain Amplifiers, Mounting Type, Analog Supply Voltage.

Microchip Technology
Package: 20-QFN (4 x 4 mm) with exposed pad
Phase-Delay Compensation: Programmable phase-delay compensation
Mounting Type: Surface-mount SMD
Microchip Technology
Package: 20-pin SSOP, 0.209 mm pitch, 5.30 mm width
Phase-Delay Compensation: Internal phase-delay compensation block
Programmable Gain Amplifiers: 2 integrated PGAs
Microchip Technology
Package: 20-SSOP
Programmable Gain Amplifiers: Internal
Analog Supply Voltage: 4.5 V to 5.5 V

MCP3901A0T-I/SS

✅ Remplacement direct
📦 SSOP-20
Same MCP3901 20-pin SSOP family and dual-channel 16/24-bit AFE function; exact ordering-suffix differences require verification

📋 Alternative de référence (hors catalogue)

MCP3901A0-I/SS Valeurs maximales et caractéristiques électriques

Device Type Dual-channel analog front end
Number of Channels 2 channels
ADC Architecture Synchronous sampling delta-sigma ADC
Résolution 16-bit or 24-bit
Maximum Output Data Rate 64 kSPS
Programmable Gain Amplifiers 2 internal PGAs
SINAD Up to 91 dB
THD -104 dBc up to the 35th harmonic
Internal Voltage Reference Yes
Phase-Delay Compensation Yes
Modulator Output Block Yes
Serial Interface SPI compatible, high speed up to 20 MHz
Boîtier 20-pin SSOP
Type de montage Surface mount
Statut RoHS Compliant

Guide de configuration des broches du MCP3901A0-I/SS 20-pin ssop

Configuration des broches du MCP3901A0-I/SS (boîtier 20-pin ssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 20-pin ssop pour le MCP3901A0-I/SS

Aucune donnée de brochage détaillée disponible pour MCP3901A0-I/SS.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MCP3901A0-I/SS convient pour 6 applications: Single-Phase Energy Metering, Smart-Grid Power Monitoring, Current-Sensor Signal Acquisition, Industrial Power-Measurement Equipment, Precision Analog Measurement Module, Energy-Metering Test and Validation.

⚡

Single-Phase Energy Metering

The MCP3901A0-I/SS fits single-phase meters that measure a current channel and a voltage channel with closely coordinated timing. Its two synchronous 16/24-bit delta-sigma ADCs, internal PGAs, and phase-delay compensation support accurate power and energy calculations, while the 20 MHz SPI-compatible interface transfers results to a metering controller. The 91 dB SINAD capability is useful when the measured signals contain low-level components that must remain above noise and distortion.

🌐

Smart-Grid Power Monitoring

For smart-grid and industrial power-monitoring equipment, the MCP3901A0-I/SS combines analog conditioning and high-resolution conversion in one device. Two simultaneous channels can represent voltage and current, and the internal programmable-gain stages reduce the need for external amplification when the source levels are suitable. Phase-delay compensation and the internal reference support repeatable system measurement, while SPI allows a host processor to manage configuration and data acquisition.

📊

Current-Sensor Signal Acquisition

The MCP3901A0-I/SS is appropriate for front-end acquisition from shunt-based or other current sensors when the required signal level matches the internal PGA ranges. A selectable 16-bit or 24-bit conversion mode provides flexibility between resolution and conversion behavior, and synchronous sampling supports systems that compare one current channel with another. The internal reference helps establish a stable conversion baseline, while external filtering remains important for controlling unwanted noise.

🏭

Industrial Power-Measurement Equipment

Industrial power-measurement instruments benefit from the MCP3901A0-I/SS because two analog channels, independent gain control, and high-resolution conversion are integrated in a compact 20-pin SSOP. The device can digitize scaled voltage and current signals while a microcontroller performs calibration, compensation, and communications. The main engineering consideration is ensuring that gain, common-mode limits, filtering, and analog grounding preserve the converter's stated accuracy in the final enclosure.

🔧

Precision Analog Measurement Module

The MCP3901A0-I/SS can serve as the measurement core of a compact precision analog module that accepts two low-level sensor channels. Internal PGAs simplify conditioning, the internal reference reduces external precision-reference overhead, and the delta-sigma converters provide selectable 16-bit or 24-bit output. A host such as a Microchip or ARM-based microcontroller can read results over SPI and apply calibration, diagnostics, and application-specific processing.

🧪

Energy-Metering Test and Validation

In energy-metering test equipment, the MCP3901A0-I/SS can evaluate two simultaneous analog channels while allowing the host system to vary gain, oversampling, and output-rate settings through its SPI-compatible register interface. Its phase-delay compensation block supports coordinated channel testing, and the available 24-bit mode is useful when resolving small changes in a simulated current or voltage waveform. The implementation should include known stimulus, calibration paths, and sufficient filtering to separate the intended signal from test-system noise.

What is the operating function of MCP3901A0-I/SS?
The MCP3901A0-I/SS is a dual-channel analog front end for precision signal measurement. According to the Microchip MCP3901 product page, it includes two synchronous sampling delta-sigma ADCs, two programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, a modulator output block, and a high-speed SPI-compatible interface. It is particularly suited to energy-metering systems that need accurate current and voltage channel measurements.
What is the ADC resolution and maximum output rate of MCP3901A0-I/SS?
The MCP3901A0-I/SS supports 16-bit and 24-bit delta-sigma conversion and can operate at an output data rate of up to 64 kSPS. The Microchip MCP3901 product page identifies the device as a dual-channel AFE with synchronous sampling and up to 91 dB SINAD. These specifications make it useful for high-resolution energy measurement and other low-bandwidth analog systems.
Where can I download the MCP3901A0-I/SS datasheet PDF?
The official Microchip MCP3901 datasheet PDF is available at https://ww1.microchip.com/downloads/en/DeviceDoc/22192d.pdf. It is the appropriate document for the MCP3901 family and includes the device description, electrical characteristics, timing information, pin descriptions, and application guidance. Use the manufacturer document rather than a third-party mirror when validating the final circuit design.
Where can I find the MCP3901A0-I/SS pinout?
The MCP3901A0-I/SS uses a 20-pin SSOP package, and its complete pin assignments are shown in the Microchip MCP3901 datasheet. The pin description should be taken from the package pinout and pin-description tables, including the analog inputs, supply connections, reference, clock, and SPI signals. A complete pin-by-pin list is not reproduced in this product summary because the manufacturer pin table was not included in the retrieved material.
What is the difference between MCP3901A0-I/SS and MCP3901A0T-I/SS?
MCP3901A0-I/SS and MCP3901A0T-I/SS are closely related MCP3901 orderable variants identified in the product-comparison information. The visible comparison material confirms the family relationship, but it does not establish every ordering-code difference, so compatibility should be confirmed against the manufacturer ordering information. Before substituting one for the other, verify temperature grade, packaging, and the exact suffix associated with the production configuration.
Is MCP3901A0-I/SS suitable for energy-metering applications?
Yes, MCP3901A0-I/SS is specifically suited to energy-metering and precision power-measurement designs. The device provides two simultaneous delta-sigma sampling channels, programmable gain, phase-delay compensation, and an SPI-compatible interface for transferring measurements to a host controller. The simultaneous sampling and phase compensation are useful when current and voltage measurements must be coordinated for power or energy calculations.
How does the MCP3901A0-I/SS support current and voltage measurements?
The MCP3901A0-I/SS can receive two analog measurement channels and condition them through independent programmable-gain amplifiers before conversion. Synchronous delta-sigma sampling helps maintain channel timing relationship, while phase-delay compensation supports applications where the two signals require alignment. A host microcontroller can configure the device and read results through the 20 MHz SPI-compatible interface.
What does the 91 dB SINAD specification mean for MCP3901A0-I/SS?
The 91 dB SINAD figure describes the combined signal-to-noise and distortion performance of the converter under its specified measurement conditions. The Microchip MCP3901 product page states up to 91 dB SINAD, making the device suitable for precise energy-metering measurements where small signal components must remain distinguishable from noise and distortion. Actual system performance also depends on analog layout, filtering, clocking, and the selected operating mode.
What design considerations matter for MCP3901A0-I/SS analog inputs?
The analog input network should limit out-of-band noise and switching energy before the signal reaches the delta-sigma converters. Input filtering, component tolerances, grounding, and the selected PGA gain determine measurement accuracy, while the signal must remain within the device's permitted input and common-mode limits. The manufacturer datasheet and application circuit should guide the final input range, filtering, and decoupling implementation.
How should the SPI connection be laid out for MCP3901A0-I/SS?
Keep the SPI clock, data, and chip-select routing short and controlled, and keep the digital interface away from high-current switching nodes and noisy analog sources. Provide a stable supply and place recommended decoupling capacitors close to the device pins. The exact signal names, timing limits, and pin locations must be confirmed in the Microchip datasheet pin table before PCB routing.
Is MCP3901A0-I/SS RoHS compliant?
Yes, the distributor product information identifies MCP3901A0-I/SS as RoHS compliant. The manufacturer documentation and product listing also identify it as an active Microchip Technology analog front end. Other compliance attributes, including REACH, AEC-Q100 status, halogen-free status, and conflict-minerals status, are not established by the retrieved material and should be confirmed with the manufacturer before regulatory submission.
Where can I buy MCP3901A0-I/SS online?
Use the Request a Quote form on this XAIPART product page to request MCP3901A0-I/SS availability, commercial terms, and lead time. The part is listed by Microchip Technology in distributor channels, but current stock and purchasing conditions can change. The form provides a direct way to request the exact suffix and package rather than relying on a generic family listing.
What is the current price of MCP3901A0-I/SS?
The current commercial price for MCP3901A0-I/SS should be requested through the Request a Quote form on this XAIPART page. The available distributor snippets do not provide a qualifying quantity-break price for the exact suffix, and the platform does not present static pricing in the technical content. Use the form for the current unit price, volume breaks, stock status, and lead time.
Is MCP3901A0-I/SS in stock and what is its lead time?
Current inventory and lead time for MCP3901A0-I/SS should be confirmed through the Request a Quote form on this XAIPART page. The distributor listing indicates that the exact part is commercially listed, but it does not establish a current stock quantity or delivery commitment. The request should identify the required quantity, tube or reel packaging, and destination.
What is the best drop-in replacement for MCP3901A0-I/SS?
MCP3901A0T-I/SS is the closest identified same-family candidate for replacement evaluation, but it should not be treated as a confirmed drop-in without checking the exact suffix differences in Microchip ordering information. No cross-brand pin-to-pin replacement was established by the cross-reference results. Validate supply voltage, temperature grade, package, pin behavior, and ordering code before authorizing a substitution.
Which Microchip part is a direct alternative to MCP3901A0-I/SS?
MCP3901A0T-I/SS is the direct same-family alternative identified in the comparison information for MCP3901A0-I/SS. It belongs to the MCP3901 dual-channel energy-metering AFE family and appears to use the same 20-pin SSOP format. The manufacturer ordering table should be consulted to determine whether the difference is limited to an orderable suffix or affects temperature, packaging, or qualification.
MCP3901A0-I/SS versus MCP3901A0T-I/SS: which should be selected?
Select MCP3901A0-I/SS when its exact ordering code matches the required electrical, temperature, and packaging configuration. Consider MCP3901A0T-I/SS when the manufacturer ordering information confirms that its suffix and production parameters satisfy the design. Both are identified as MCP3901 family devices, but the retrieved comparison material does not provide enough detail to claim identical pin behavior or qualification status without further verification.
When should I choose MCP3901A0-I/SS over another dual-channel AFE?
Choose MCP3901A0-I/SS when the design needs two synchronously sampled analog channels, selectable 16-bit or 24-bit delta-sigma conversion, internal PGAs, an internal reference, phase-delay compensation, and an SPI-compatible interface in a 20-pin SSOP. It is a strong fit for energy-metering and precision power-measurement systems. A different AFE should be considered only when its input range, accuracy, interface, qualification, or package better matches the system constraints.

Données de référence d'ingénierie pour MCP3901A0-I/SS — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MCP3901A0-I/SS when the design requires a two-channel, synchronously sampling analog front end for energy metering or precision power measurement, particularly when selectable 16-bit or 24-bit conversion, internal PGAs, an internal reference, phase-delay compensation, and a 20 MHz SPI-compatible interface are valuable. It is also appropriate when a compact 20-pin SSOP and low external component count simplify the analog design. MCP3901A0T-I/SS is the closest identified same-family candidate, but its exact ordering-code differences must be checked before substitution. Do not choose a different manufacturer solely for pin compatibility without verifying supply range, common-mode limits, gain table, conversion timing, register map, and qualification. For systems requiring a different interface, wider input range, automotive qualification, or a different package, compare those requirements before finalizing the AFE selection.

Comparaison avec les alternatives

Paramètre Ce produit MCP3901A0T-I/SS
Brand Microchip Technology Microchip Technology
Package SSOP-20 SSOP-20
Device Type Dual-channel analog front end Dual-channel analog front end
Number of Channels 2 2

Principaux différenciateurs

  • Two-channel synchronous measurement in one analog front end (vs MCP3901A0T-I/SS)
  • Integrated signal-conditioning functions reduce external circuitry (vs MCP3901A0T-I/SS)
  • High-speed SPI-compatible host interface (vs MCP3901A0T-I/SS)

Notes de conception

Place the input filtering components and the required bypass capacitors close to the MCP3901A0-I/SS pins. Keep the two analog input paths as short and symmetric as practical, and route them away from the SPI clock and any high-current switching node. A quiet ground plane and a clear separation between analog and digital return currents reduce the chance that switching energy will appear as measurement error.

Treat the analog input as a precision measurement node rather than as a general-purpose logic input. Select the PGA gain so the signal uses the converter's useful range without exceeding the specified input and common-mode limits. Add filtering to remove energy outside the intended measurement bandwidth, and verify that the filter does not introduce unacceptable phase error between the current and voltage channels.

Do not substitute MCP3901A0T-I/SS solely because it is another MCP3901 family ordering code. Confirm the exact suffix, temperature range, package, supply configuration, and production status in the Microchip ordering information. Also confirm that the selected channel configuration, gain range, oversampling ratio, and data rate are supported by the firmware that will configure the device.

Provide the supply voltage and decoupling required by the manufacturer datasheet, and keep the regulator or supply source physically separated from sensitive analog traces where practical. The internal reference and PGAs simplify the measurement chain, but they do not remove the need for a stable supply and clean reference environment. Validate startup, reset, and power-sequencing behavior in the complete measurement module.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is identified in the distributor product information. Other compliance attributes are not established by the retrieved manufacturer and distributor material.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MCP3901A0-I/SS datasheet MCP3901A0-I/SS datasheet pdf MCP3901A0-I/SS pinout MCP3901A0-I/SS specifications MCP3901A0-I/SS equivalent MCP3901A0-I/SS replacement MCP3901A0-I/SS cross reference MCP3901A0-I/SS vs MCP3901A0T-I/SS MCP3901A0-I/SS price MCP3901A0-I/SS stock MCP3901A0-I/SS SSOP-20 MCP3901A0-I/SS energy metering Microchip MCP3901A0-I/SS MCP3901A0-I/SS SPI interface

Composants & termes associés

Microchip Technology MCP3901A0-I/SS MCP3901A0T-I/SS analog front end AFE delta-sigma ADC synchronous sampling programmable gain amplifier PGA internal voltage reference phase-delay compensation modulator output SPI 20 MHz serial interface SSOP-20 surface mount energy metering power measurement smart grid current measurement voltage measurement SINAD THD 64 kSPS RoHS
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ