MKL17Z64VFM4 - 48MHz Cortex-M0+ 64KB MCU | NXP
Référence : MKL17Z64VFM4 ✓ ActifMKL17Z64VFM4 Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Kinetis KL1 series combines an ARM Cortex-M0+ core with embedded flash and a selection of serial, analog, timing, and communication peripherals. The MKL17Z64VFM4 belongs to the low-power Kinetis family intended for battery-operated and portable embedded applications.
Its principal characteristics include a 32-bit ARM Cortex-M0+ processor operating at 48 MHz, 64 KB of flash, and USB 2.0 support. The 64 KB program-memory capacity is suitable for compact firmware, protocol stacks, control logic, and human-interface applications. The 32-QFN package also reduces board area compared with leaded packages while supporting high-density automated assembly.
The 48 MHz Cortex-M0+ architecture provides a practical balance between processing throughput, deterministic control, and low power consumption. Because the processor is designed for embedded workloads, the device can execute control tasks, manage peripherals, and service USB communications without requiring an external microprocessor. Exact SRAM capacity, operating-voltage limits, peripheral configuration, and current-consumption figures should be confirmed in the manufacturer datasheet before a power-sensitive design is released.
Typical applications include low-power USB accessories, portable instrumentation, compact control systems, battery-operated equipment, and embedded human-interface devices. In each case, the 64 KB flash allocation supports a meaningful firmware image while the QFN package simplifies integration into compact assemblies. USB 2.0 is particularly useful for configuration, data logging, firmware updates, and connection to a host controller.
PCB implementation should follow the manufacturer's land pattern, exposed-pad soldering guidance, and decoupling recommendations exactly. Confirm the board footprint against the 32-pin QFN 5 x 5 mm drawing before layout release, and validate thermal performance at the highest intended operating temperature. Firmware development should use the appropriate Kinetis SDK, configuration tools, and a debug interface compatible with the selected device variant.
This product record combines the verified identity, core architecture, memory capacity, frequency, USB capability, package, and lifecycle information with application guidance, replacement considerations, and design-oriented comparison data. It is intended to help engineers identify whether the MKL17Z64VFM4 matches the memory, connectivity, footprint, and low-power requirements of a new embedded design.
Alternatives de remplacement direct pour MKL17Z64VFM4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MKL17Z64VFM4 (même facteur de forme et même empreinte) — différant par Flash Memory, Package, Product Family.
MKL17Z64VDA4
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →MKL17Z64VDA4R
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MKL17Z256VFM4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MKL17Z64VFM4 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Series | Kinetis KL1 |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| USB Version | USB 2.0 |
| Boîtier | 32-QFN (5 x 5 mm) |
| Nombre de broches | 32 pins |
| Type de montage | Surface mount |
| Statut du cycle de vie | Active |
| Application Category | Battery-operated and portable embedded applications |
Guide de configuration des broches du MKL17Z64VFM4 32-qfn (5 x 5 mm)
Configuration des broches du MKL17Z64VFM4 (boîtier 32-qfn (5 x 5 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MKL17Z64VFM4.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MKL17Z64VFM4 convient pour 6 applications: Low-Power USB Accessories, Portable Measurement Devices, Battery-Operated Control Systems, Compact Industrial Interface Modules, Portable Data Loggers, Human-Interface and Configuration Devices.
Low-Power USB Accessories
The MKL17Z64VFM4 fits low-power USB accessories because its 48 MHz ARM Cortex-M0+ core provides responsive control performance while the 64 KB flash allocation accommodates compact protocol and application firmware. USB 2.0 support can simplify connection to a host for configuration, data transfer, or firmware maintenance. The 32-QFN 5 x 5 mm package helps reduce board area in compact dongles, readers, and interface accessories. Before release, verify the required USB device or host role, transceiver arrangement, bus-power budget, and exposed-pad thermal design in the application circuit.
Recommandé
Portable Measurement Devices
The MKL17Z64VFM4 is suitable for portable measurement products that combine local control, data acquisition, and USB connectivity. Its 48 MHz Cortex-M0+ core can manage sensor sampling, digital filtering, user commands, and data logging within a single embedded platform, while 64 KB of flash supports a focused firmware image. The 32-QFN 5 x 5 mm package reduces instrument footprint without requiring a large leaded package. Verify the target analog peripherals, ADC performance, reference accuracy, noise behavior, and low-power mode requirements against the NXP documentation before schematic release.
Recommandé
Battery-Operated Control Systems
The MKL17Z64VFM4 fits compact battery-operated control systems where energy efficiency, deterministic peripheral handling, and USB service access are important. NXP identifies the Kinetis KL1 family as an ultra-low-power platform for battery-operated applications, and the 48 MHz Cortex-M0+ core provides sufficient control bandwidth without a higher-power application processor. The 64 KB flash capacity is appropriate for focused control firmware rather than large graphical interfaces. Confirm sleep-mode currents, active current, wake-up timing, clock accuracy, and regulator efficiency with measurements from the final board and power configuration.
Recommandé
Compact Industrial Interface Modules
The MKL17Z64VFM4 can serve as the controller in a compact industrial interface module that must provide local configuration, status reporting, and USB connectivity. Its 48 MHz ARM Cortex-M0+ core can execute protocol handling and supervisory logic, while 64 KB of flash accommodates a compact protocol stack and application logic. The 32-QFN 5 x 5 mm footprint supports dense, automated PCB assembly. Engineers should verify industrial temperature requirements, isolation strategy, ESD protection, connector mechanics, and electromagnetic compatibility before using the device in an industrial enclosure.
Recommandé
Portable Data Loggers
The MKL17Z64VFM4 is applicable to portable data loggers that collect local sensor information and transfer it through USB. The 48 MHz Cortex-M0+ processor can handle time-based acquisition, event processing, and communication tasks, while the 64 KB program memory supports a constrained embedded application. Its small 32-QFN package preserves board area for sensors, storage, and power circuitry. The design must confirm timer resolution, available SRAM, storage-interface support, USB enumeration requirements, and average current consumption for the complete logging duty cycle before production design.
Recommandé
Human-Interface and Configuration Devices
The MKL17Z64VFM4 can support compact human-interface and configuration devices that interpret button or sensor inputs, provide status feedback, and connect to a computer over USB. The 48 MHz Cortex-M0+ core handles event handling and interface logic, while 64 KB of flash stores device-specific behavior and control firmware. The 32-QFN 5 x 5 mm package allows placement close to connectors and input circuitry. Validate GPIO availability, debounce timing, display or indicator requirements, USB descriptors, firmware-update procedures, and accessibility of the exposed thermal pad in the final layout.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MKL17Z64VFM4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MKL17Z64VDA4 | MKL17Z64VDA4R | MKL17Z256VFM4 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 256 KB |
| USB Support | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Product Series | Kinetis KL1 | Kinetis KL1 | Kinetis KL1 | Kinetis KL1 |
| Program Memory Difference | Baseline: 64 KB | 0 KB difference | 0 KB difference | 192 KB more flash |
Principaux différenciateurs
- Provides USB connectivity within a 64 KB embedded platform (vs MKL17Z256VFM4)
- Matches the core and flash capacity of the 64 KB VDA4 variant (vs MKL17Z64VDA4)
- Combines a 48 MHz core with a compact 5 x 5 mm footprint (vs MKL17Z64VDA4R)
Notes de conception
Use the exact 32-QFN 5 x 5 mm land pattern from the NXP package documentation, including the exposed-pad geometry, solder-mask definition, and paste apertures. Confirm the PCB footprint against the mechanical drawing rather than relying on a generic QFN-32 footprint. Place required input, decoupling, and crystal or clock components close to their assigned pins, and route high-current and sensitive analog paths separately from USB and fast-switching nodes.
Design the supply path around the exact operating-voltage range and current limits in the NXP datasheet, because those values are not reproduced here. Keep the regulator output impedance, local capacitance, startup behavior, and return-current path compatible with the manufacturer reference circuit. For a battery-powered design, measure active, idle, and sleep current at the system level because firmware activity, USB attachment, peripherals, and external circuitry can dominate the final consumption.
The exposed pad beneath the QFN is normally part of the device's thermal path as well as its electrical footprint. Follow the manufacturer's soldering and copper-area guidance, provide a low-impedance thermal connection, and avoid long thermal discontinuities beneath the package. Validate the hottest operating condition with the final enclosure, ambient temperature, and nearby heat sources. Estimated: actual junction-temperature rise depends on package construction, copper area, board material, and airflow, so calculate it from manufacturer thermal guidance rather than assuming a universal value.
Do not treat related Kinetis MPNs as automatically interchangeable. Before substituting a suffix, check pin assignments, exposed-pad connection, temperature grade, qualification status, packing method, flash size, SDK support, and errata applicability. The 48 MHz clock and USB interface also require correct crystal, reset, clock-tree, decoupling, and signal-routing implementation; a footprint match alone does not guarantee a functional drop-in replacement.
Informations de conformité
The manufacturer identifies the MKL17Z64VFM4 as active, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were included in the verified records. Confirm current compliance documents with NXP for the exact orderable MPN.