MPC8545VTANGA - PowerQUICC III 800MHz e500 MPU | NXP | Networking
Référence : MPC8545VTANGA ✓ ActifMPC8545VTANGA Présentation
A PowerQUICC III processor is a highly integrated system-on-chip (SoC) that combines a high-performance PowerPC CPU core with extensive communications peripherals. The MPC85xx family sits within the broader PowerQUICC communications-processor hierarchy, which evolved from the earlier PowerQUICC II (MPC82xx) family and targets integrated control-plane and data-plane processing for routers, switches, and base stations. By integrating CPU, memory controller, Ethernet, PCI Express, and RapidIO interfaces on a single die, PowerQUICC III reduces board area and BOM count relative to discrete processor-plus-ASIC designs.
Key features of the MPC8545VTANGA include an 800 MHz e500 core with 32 KB L1 instruction cache and 32 KB L1 data cache, a 256 KB L2 cache, a DDR2 memory controller, four Gigabit Ethernet controllers, a PCI Express interface, a RapidIO interconnect, dual I2C, DUART, and a 32-bit local bus. The device integrates a security engine supporting DES, 3DES, AES, RSA, and ECC acceleration for cryptographic workloads.
Architecturally, the e500 core implements the Book E extension to the PowerPC ISA with hardware hypervisor support, dual-issue superscalar pipeline, and dynamic power management. The integrated DDR2 controller supports up to 1 GB of addressable memory with ECC, enabling reliable operation in telco and industrial environments where single-bit error correction is mandatory.
Typical applications include enterprise routers and switches, line cards for multi-service platforms, industrial control gateways, secure network appliances, and military/aerospace embedded systems. The part is commonly used in designs that have migrated from the earlier PowerQUICC II MPC82xx family and require higher throughput at lower power.
When designing with this part, ensure the FC-PBGA 29x29 mm land pattern meets JEDEC MSL-3 or stricter handling requirements and that thermal vias are placed directly under the die. The power sequencing and reset requirements are detailed in the MPC8545E hardware specifications document; violating the sequence can permanently damage the device.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour MPC8545VTANGA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
MPC8545CVTANGA
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MPC8545EVTANGA
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8545VTALGA
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8545VTAQGA
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8545VTANGB
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MPC8545VTANGA Valeurs maximales et caractéristiques électriques
| Core Architecture | PowerPC e500 |
| Core Count | 1 |
| Data Width | 32-Bit |
| Maximum Core Frequency | 800 MHz |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| L2 Cache | 256 KB |
| Memory Controller | DDR2 with ECC |
| Ethernet Interfaces | 4 x Gigabit Ethernet |
| PCI Express | Yes (x1/x2) |
| RapidIO | Yes |
| Security Engine | DES/3DES/AES/RSA/ECC |
| Boîtier | 783-FCPBGA (29x29 mm) |
| Type de montage | Surface Mount (BGA) |
| Température de fonctionnement | 0C to +105C (TA) |
Guide de configuration des broches du MPC8545VTANGA 783-fcpbga (29x29 mm)
Configuration des broches du MPC8545VTANGA (boîtier 783-fcpbga (29x29 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MPC8545VTANGA.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MPC8545VTANGA convient pour 6 applications: Enterprise Router Control Plane, Multi-Service Switch Line Card, Industrial Control Gateway, Secure Network Appliance (VPN/Firewall), Military / Aerospace Embedded System, Wireless Base Station Baseband Controller.
Enterprise Router Control Plane
The MPC8545VTANGA's 800 MHz e500 core, hardware virtualization, and integrated security engine (AES/3DES/RSA/ECC) make it well-suited for enterprise router control-plane processing at line rates up to multi-gigabit. With four Gigabit Ethernet MACs, PCI Express for fabric attachment, and ECC-protected DDR2, the part handles BGP/OSPF route-table computation, management-plane encryption, and ACL enforcement without an external crypto ASIC. Designers typically place the part on a line card alongside PHY transceivers and a switch fabric, leveraging the integrated RapidIO for backplane interconnect. The 783-FCPBGA package provides the thermal headroom needed for closed chassis designs at 800 MHz with proper thermal via placement under the die.
Recommandé
Multi-Service Switch Line Card
In multi-service switch line cards, the MPC8545VTANGA serves as the local processor for forwarding-table management, OAM (operations, administration, and maintenance) processing, and per-port statistics aggregation. The integrated DDR2 controller with ECC addresses the strict single-bit-error correction requirements of carrier-grade Ethernet equipment, while the PCI Express and RapidIO ports enable high-bandwidth attachment to the switch fabric ASIC. The e500 core's Book E hypervisor support allows partitioning the CPU into multiple OS domains for service-isolation security. Its 800 MHz clock rate is sufficient for control-plane workloads at 10G line rates when paired with a dedicated network processor for data-plane packet handling.
Recommandé
Industrial Control Gateway
The MPC8545VTANGA's wide peripheral set - dual I2C, DUART, 32-bit local bus, and Gigabit Ethernet - makes it an effective controller for industrial gateways that bridge fieldbus (Modbus, Profibus, CAN) to Ethernet/IP. The e500 core runs deterministic real-time Linux or VxWorks with sub-millisecond interrupt latency, suitable for SCADA and PLC supervisory applications. Hardware ECC on DDR2 improves reliability in factory-floor environments with electromagnetic interference, and the industrial temperature grade (0C to +105C) supports unconditioned cabinet installations. Designers commonly pair the part with a managed Ethernet switch ASIC and isolate the fieldbus transceivers behind the local bus for protocol translation and store-and-forward buffering.
Recommandé
Secure Network Appliance (VPN/Firewall)
The MPC8545VTANGA's on-chip security engine accelerates IPsec, SSL/TLS, and MACsec workloads at multi-hundred-Mbps throughput, making it a strong fit for SMB VPN concentrators and firewall appliances. By offloading AES-GCM and 3DES to dedicated crypto hardware, the e500 core is freed for policy lookup, NAT translation, and routing-table maintenance. The integrated four-port Gigabit Ethernet MAC supports direct attachment to WAN, LAN, DMZ, and management interfaces without an external switch, reducing BOM and PCB area. ECC-protected DDR2 ensures stable operation under sustained security workloads where single-bit DRAM errors would otherwise force link renegotiation.
Recommandé
Military / Aerospace Embedded System
The PowerQUICC III architecture's long lifecycle support, MIL-STD-810 environmental resilience, and extensive BSP ecosystem make the MPC8545VTANGA a common choice for military and aerospace embedded subsystems such as mission computers, situational-awareness displays, and avionics data concentrators. The e500 core's Book E virtualization enables secure partitioning between red/black (classified/unclassified) domains on a single processor, while the integrated ECC and parity on internal buses improves radiation-event resilience. Combined with the 783-FCPBGA's robust mechanical package and the wide industrial temperature range, the part suits applications requiring high MTBF and long-term obsolescence management under defense program timelines.
Recommandé
Wireless Base Station Baseband Controller
In 3G/4G small-cell and pico-cell base stations, the MPC8545VTANGA acts as the baseband controller, managing Layer-2/3 protocols, MAC scheduling, and backhaul Ethernet/IP connectivity. The integrated four-port Gigabit Ethernet and PCI Express link the digital front-end (DFE) FPGA to the baseband DSP cluster and the core network gateway. Hardware ECC on DDR2 maintains link integrity under sustained real-time DSP data flow, and the e500's deterministic interrupt latency supports TDMA/FDMA scheduling at LTE subframe boundaries. The 783-FCPBGA package's thermal performance allows compact mezzanine layouts used in remote-radio-head (RRH) deployments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MPC8545VTANGA — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MPC8545CVTANGA | MPC8545EVTANGA | MPC8545VTALGA | MPC8545VTAQGA | MPC8545VTANGB |
|---|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same |
| Core Architecture | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Core Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Temperature Grade | Industrial (0C to +105C) | Commercial (0C to +85C) | Industrial (0C to +105C) | Industrial (0C to +105C) | Industrial (0C to +105C) | Industrial (0C to +105C) |
| L2 Cache | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Security Engine | AES/3DES/RSA/ECC | AES/3DES/RSA/ECC | Enhanced (additional algorithms) | AES/3DES/RSA/ECC | AES/3DES/RSA/ECC | AES/3DES/RSA/ECC |
Principaux différenciateurs
- Industrial temperature grade with full hardware security engine (vs MPC8545CVTANGA)
- Mature PowerPC e500 ecosystem with extensive BSP support (vs MPC8548E)
- 800 MHz e500 core with integrated DDR2 ECC and quad Gigabit Ethernet (vs MPC8545EPXANGB)
Notes de conception
The 783-FCPBGA 29x29 mm package has a junction-to-ambient thermal resistance that requires a multi-layer PCB with thermal vias directly under the die. For sustained 800 MHz operation, follow the NXP application note on thermal management: stitch at least 25 thermal vias (0.3 mm pitch, 0.2 mm drill) under the central BGA thermal pad, and ensure airflow of at least 1 m/s across the top of the package in closed chassis. Estimated: at Tj=105C ambient and 6 W dissipation, the junction rises approximately 30-40C above ambient without thermal vias, which can exceed the silicon limit; with proper via stitching the rise drops to under 15C.
The FC-PBGA substrate requires MSL-3 handling and reflow profiles compliant with JEDEC J-STD-020. The 783-ball pattern uses 1.0 mm pitch; escape routing between balls demands microvia or HDI PCB technology with stacked vias. DDR2 traces must be length-matched within the tolerance specified in the NXP hardware specifications datasheet (typically +/- 25 mil), and reference planes must remain uninterrupted beneath the DDR2 bus to maintain impedance control.
Power sequencing for the MPC8545VTANGA must follow the strict order defined in the NXP MPC8545E hardware specifications datasheet: core voltage (Vdd) before I/O voltage (GVDD), with monotonic ramp rates and minimum dwell times. Violating the sequence can cause latch-up; design the PMIC or discrete regulator network to enforce this sequence via power-good signals and MOSFET OR-ing. Decouple each Vdd/GVDD pair with 0.1 uF MLCCs placed within 2 mm of the corresponding balls, plus bulk 10-22 uF tantalum or polymer capacitors near the package perimeter.
Do not confuse the MPC8545VTANGA with the higher-speed MPC8545EPXANGB sibling - they share the e500 core but differ in package and speed grade. When porting firmware, verify the device tree bindings against the specific MPC85xx SoC variant; using the wrong compatible string in U-Boot or Linux results in a non-functional board despite identical peripherals. Additionally, the e500 core requires cache-coherent DMA mappings for RapidIO and PCI Express; missing the 'dma-coherent' attribute in the device tree causes silent data corruption in network-accelerator drivers.
Informations de conformité
RoHS/REACH compliance status not explicitly stated in the verified web data; lead-free packing is implied by the 'N' packing code per NXP's standard part-number convention. AEC-Q100 is not applicable - this is a networking/communications MPU, not an automotive-qualified IC.