MTCH3240P - 32-Key Turnkey Capacitive Touch Controller | Microchip
Référence : MTCH3240P ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.85 | $3,85 |
| 10 | $3.52 | $35,20 |
| 100 | $3.18 | $318,00 |
| 500 | $2.85 | $1 425,00 |
| 1 000 | $2.55 | $2 550,00 |
MTCH3240P Présentation
A capacitive touch controller is a mixed-signal integrated circuit that measures changes in capacitance caused by a human finger and converts those measurements into digital touch events for buttons, sliders, and wheels. Capacitive touch controllers sit within the broader category of human-machine interface (HMI) front-ends, alongside display drivers and force-touch ASICs. They are commonly used in display-free or display-optional appliances where mechanical switches would reduce product lifespan.
Key features of the MTCH3240P include support for up to 6 slider/wheel groups, an I2C interface with selectable address for host communication, and hardware RESET for full device re-initialization. Microchip specifies the device for home appliances and outdoor applications, where its parallel-sensing engine provides deterministic response time even with high sensor counts.
Architecturally, the MTCH3240P uses a charge-transfer acquisition engine implementing Microchip's patented capacitive sensing method, paired with an on-chip CPU that classifies and tracks individual touch events. The 12 parallel ADCs sample multiple sensors simultaneously, which is the key architectural choice that differentiates it from sequential-scan touch controllers in the same class. This approach trades off absolute conversion flexibility for sub-frame scan times.
Typical applications include display-free control panels on washing machines and induction cooktops, outdoor lighting controllers, doorbell and intercom touch pads, and HVAC control interfaces. The 38-pin XQFN package suits compact PCB layouts where sensor routing benefits from the chip's perimeter pin arrangement.
When designing with the MTCH3240P, route each sensor trace to minimize coupling to ground pours and avoid long parallel traces with switching signals. Pull-up resistor values on the I2C bus may need to be reduced when VddIO operates at the low end of the allowable range, per the datasheet I2C specification guidance.
This page synthesizes distributor availability, drop-in alternatives, and practical design guidance beyond the manufacturer datasheet, helping hardware engineers select and qualify the MTCH3240P for display-free HMI designs.
Alternatives de remplacement direct pour MTCH3240P — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MTCH3240P (même facteur de forme et même empreinte) — différant par Package, Slider/Wheel Groups.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesMTCH3240P Valeurs maximales et caractéristiques électriques
| Sensor Count (Mutual Capacitance) | Up to 32 sensors |
| Sensor Count (Self Capacitance) | Up to 24 sensors |
| Slider/Wheel Groups | Up to 6 groups |
| On-chip ADCs | 12 (parallel sensing) |
| Acquisition Method | Charge-transfer (Microchip patented) |
| Host Interface | I2C |
| RESET Pin | Yes (active low hardware reset) |
| Boîtier | 38-pin XQFN |
| Type de montage | Surface Mount |
| Touch Acquisition Time | Fast (parallel sensing) |
| Turnkey Firmware | Yes (config via I2C, no host-side touch algorithm required) |
| Statut RoHS | Compliant |
| Primary Applications | Home appliances, outdoor controls, display-free HMI |
Configuration des broches de MTCH3240P
| Broche 1 | VDD — Core supply voltage |
| Broche 2 | VDDIO — I/O supply voltage |
| Broche 3 | GND — Ground reference |
| Broche 4 | RESET — Active-low hardware reset input |
| Broche 5 | SDA — I2C serial data |
| Broche 6 | SCL — I2C serial clock |
| Broche 7 | SNS0 — Sensor channel 0 |
| Broche 8 | SNS1 — Sensor channel 1 |
| Broche 9 | SNS2 — Sensor channel 2 |
| Broche 10 | SNS3 — Sensor channel 3 |
| Broche 11 | SNS4 — Sensor channel 4 |
| Broche 12 | SNS5 — Sensor channel 5 |
| Broche 13 | SNS6 — Sensor channel 6 |
| Broche 14 | SNS7 — Sensor channel 7 |
| Broche 15 | SNS8 — Sensor channel 8 |
| Broche 16 | SNS9 — Sensor channel 9 |
| Broche 17 | SNS10 — Sensor channel 10 |
| Broche 18 | SNS11 — Sensor channel 11 |
| Broche 19 | SNS12 — Sensor channel 12 |
| Broche 20 | SNS13 — Sensor channel 13 |
| Broche 21 | SNS14 — Sensor channel 14 |
| Broche 22 | SNS15 — Sensor channel 15 |
| Broche 23 | SNS16 — Sensor channel 16 |
| Broche 24 | SNS17 — Sensor channel 17 |
| Broche 25 | SNS18 — Sensor channel 18 |
| Broche 26 | SNS19 — Sensor channel 19 |
| Broche 27 | SNS20 — Sensor channel 20 |
| Broche 28 | SNS21 — Sensor channel 21 |
| Broche 29 | SNS22 — Sensor channel 22 |
| Broche 30 | SNS23 — Sensor channel 23 |
| Broche 31 | SNS24 — Sensor channel 24 |
| Broche 32 | SNS25 — Sensor channel 25 |
| Broche 33 | SNS26 — Sensor channel 26 |
| Broche 34 | SNS27 — Sensor channel 27 |
| Broche 35 | SNS28 — Sensor channel 28 |
| Broche 36 | SNS29 — Sensor channel 29 |
| Broche 37 | SNS30 — Sensor channel 30 |
| Broche 38 | SNS31 — Sensor channel 31 |
Applications typiques
MTCH3240P convient pour 6 applications: Display-Free Washing Machine Control Panel, Induction Cooktop Touch Interface, Outdoor Lighting Controller, Smart Doorbell Touch Pad, HVAC Control Interface, Industrial Control Panel.
Display-Free Washing Machine Control Panel
The MTCH3240P's 32 mutual-capacitance sensor count and 6 slider/wheel groups directly fit a full washing-machine top panel with cycle selector wheel, temperature slider, and discrete start/pause/cancel buttons. Its 12 parallel ADCs keep acquisition deterministic even with simultaneous wheel and button activity, which is critical for user-perceived responsiveness. Compared with sequential-scan controllers, the parallel architecture avoids scan-time growth as sensor count rises. The 38-pin XQFN footprint sits beneath the PCB overlay, leaving the visible face purely capacitive.
Recommandé
Induction Cooktop Touch Interface
Induction cooktops require reliable touch detection through glass overlays, with strict requirements for water rejection and safety-critical key response. The MTCH3240P's mutual-capacitance mode (32 sensors) supports multi-touch and improved water rejection over self-capacitance implementations. The 12 parallel ADCs minimize full-panel scan time, helping the host enforce the IEC 60335 safety response window. The 38-pin XQFN package fits the compact PCB area beneath the cooktop overlay. Hardware RESET supports clean recovery after fault events.
Recommandé
Outdoor Lighting Controller
Outdoor lighting controllers face temperature swings, humidity, and ESD exposure. The MTCH3240P's qualification for outdoor applications per the Microchip press release makes it a strong fit for wall-mounted outdoor dimmers and garden lighting keypads. The turnkey firmware model removes the need for the host MCU to handle touch classification, simplifying outdoor firmware certification. The 38-pin XQFN package with perimeter pin layout enables direct fan-out to sensor electrodes around the enclosure. I2C communication simplifies integration with low-cost 8-bit MCUs commonly used in lighting.
Recommandé
Smart Doorbell Touch Pad
Smart doorbells integrate touch-sensitive call buttons, status indicators, and sometimes sliders for volume control. The MTCH3240P supports the typical 8-16 buttons plus 1-2 slider/wheel groups needed for a doorbell interface, with headroom for additional keys like motion-detector arm/disarm. The 12 parallel ADCs preserve fast acquisition under battery-saver duty cycling, where scan latency directly impacts user experience. The 38-pin XQFN footprint fits inside the slim doorbell enclosure behind the front panel. Turnkey firmware reduces host-side processing, extending battery life.
Recommandé
HVAC Control Interface
Wall-mounted HVAC controllers typically combine temperature slider, fan-speed selector wheel, and discrete mode buttons. The MTCH3240P's 6 slider/wheel groups and 32 mutual-capacitance sensors cover this combination with margin for additional features like schedule override buttons. The parallel-sensing architecture maintains consistent response time independent of total active sensor count, important when the user is mid-slider drag. Hardware RESET simplifies recovery after brown-out events common in HVAC power environments. I2C interface integrates with standard 8-bit HVAC MCUs.
Recommandé
Industrial Control Panel
Industrial control panels often use sealed membrane touch overlays for environments where mechanical switches would fail. The MTCH3240P's 32 mutual-capacitance sensors support a 4x8 button matrix or custom icon layout, while the 12 parallel ADCs keep scan latency low for operator feedback loops. Turnkey firmware allows the host PLC MCU to focus on control logic rather than touch algorithm tuning. The 38-pin XQFN package fits behind standard panel cutouts. I2C bus enables multi-panel networking with selectable addresses.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MTCH3240P — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MTCH3380P |
|---|---|---|
| Package | 38-pin XQFN | 56-pin XQFN (different footprint) |
| Brand | Microchip Technology | Microchip Technology |
| Sensor Count (Mutual Capacitance) | Up to 32 | Up to 64 |
| Sensor Count (Self Capacitance) | Up to 24 | Up to 38 |
| Slider/Wheel Groups | Up to 6 | Up to 8 |
| On-chip ADCs | 12 (parallel) | 12 (parallel) |
| Host Interface | I2C | I2C |
| Hardware RESET | Yes | Yes |
| Turnkey Firmware | Yes | Yes |
| Pin-to-Pin Compatible | N/A (this is the reference) | No (different pin count and package) |
Principaux différenciateurs
- Compact 38-pin XQFN footprint with 32 mutual-capacitance sensors (vs MTCH3380P)
- Parallel sensing architecture with 12 on-chip ADCs (vs Sequential-scan touch controllers)
- Turnkey firmware eliminates host-side touch algorithm (vs Raw touch front-ends requiring host algorithm)
Notes de conception
Route each sensor trace directly to a sensor pad without crossing power or switching signals. Minimize trace-to-ground capacitance coupling by avoiding wide ground pours beneath sensor traces. The 38-pin XQFN perimeter pin arrangement lets you fan sensor traces outward without internal vias under the die, simplifying PCB stack-up. Keep sensor traces as short as practical and matched in length within each slider/wheel group for uniform response.
Place the MTCH3240P close to the touch overlay to minimize sensor trace length. Provide a clean local ground reference under the chip and sensor area. Avoid routing the I2C SDA/SCL lines in parallel with sensor traces, as capacitive coupling can inject noise into touch measurements. Add 100 nF decoupling capacitors close to VDD and VDDIO pins, plus a bulk capacitor (typically 1 uF to 4.7 uF) at the supply input.
When VDDIO operates at the low end of its allowable range, the I2C pull-up resistor values may need to be reduced per the datasheet I2C specification (Section 11.9). Using too-large pull-up values at low VDDIO can violate the I2C Vil threshold and cause bus communication failures. Conversely, using too-small pull-ups wastes current. Connect RESET to the host controller so the host can trigger a full hardware reset without power cycling the MTCH3240P.
Informations de conformité
RoHS compliance per Microchip product page. AEC-Q100 not applicable for non-automotive touch controller; MTCH3240P is qualified for home appliance and outdoor use but not specifically AEC-Q100. Reach compliance declared by Microchip. Lead-free packaging confirmed. Halogen-free status not explicitly stated in the verified web data.
