Texas Instruments

OPA344PA - 5.5V 1MHz RRIO Op Amp | Texas Instruments

Référence : OPA344PA ✓ Actif
5.5 V Vdss 8-pin PDIP Package
MOQ : 1 |

OPA344PA Présentation

Texas Instruments OPA344PA is a single-supply, rail-to-rail input and output operational amplifier with a 5.5 V maximum supply, 1 MHz gain-bandwidth product, and 1 mV typical input offset voltage, packaged in an 8-pin PDIP. The OPA344 is unity-gain stable, making it suitable for signal-conditioning stages that require stable operation with direct feedback.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. It belongs to the hierarchy of analog amplifiers, voltage amplifiers, and semiconductor devices. Rail-to-rail input operation allows the input common-mode range to extend toward the supply rails, while rail-to-rail output operation improves output-voltage range. These characteristics are useful in low-voltage systems where conventional amplifier stages cannot cover the available signal range.

Key features include a 5.5 V maximum supply, 1 MHz gain-bandwidth product, 1 mV typical offset voltage, rail-to-rail input and output behavior, and unity-gain stability. The single-amplifier configuration reduces board area compared with a dual amplifier when only one signal path is required. The 8-pin PDIP format also supports through-hole assembly and prototyping in laboratory, industrial, and instrumentation equipment.

The OPA344 uses complementary rail-to-rail CMOS input stages to support operation close to the supply limits. Its 1 MHz gain-bandwidth product places it in the low-power, general-purpose precision-amplifier class rather than the high-speed signal-chain class. At low closed-loop gain, unity-gain stability removes the need for external compensation. Designers should still account for the finite gain-bandwidth product, output-drive capability, noise, and input-bias-current requirements of the selected feedback network.

Typical uses include low-level sensor conditioning, buffered voltage references, portable measurement systems, current-to-voltage conversion, and general single-supply analog signal processing. The OPA344PA is also appropriate for educational and laboratory circuits where a through-hole package simplifies breadboard and socket-based assembly. Its operating limits, supply range, electrical characteristics, and absolute maximum ratings should be checked in the manufacturer datasheet before committing to a design.

For PCB implementation, place input, output, feedback, and bypass components close to the amplifier to minimize parasitic capacitance and feedback-loop area. A supply-bypass capacitor should be positioned near the positive and negative supply pins. Decoupling value, grounding, and input-source isolation are important because high-frequency noise or excessive input capacitance can alter stability and measured accuracy.

This page combines the OPA344PA electrical envelope, package and pin information with application-focused design guidance, verified comparison options, and practical replacement criteria. It is intended to help engineers identify whether the part fits a precision, low-power, single-supply design and how to validate any substitution against the complete manufacturer datasheet.

Alternatives de remplacement direct pour OPA344PA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec OPA344PA (même facteur de forme et même empreinte) — différant par Gain-Bandwidth Product, Mounting Type, Package, Amplifier Type, Slew Rate.

Texas Instruments
Gain-Bandwidth Product: 5.5 MHz
Amplifier Type: Single CMOS operational amplifier
Slew Rate: 6 V/us
Comparer avec OPA344PA →
Texas Instruments
Mounting Type: Surface mount
Package: 8-pin SOIC (D)
Slew Rate: 0.8 V/µs
Comparer avec OPA344PA →

OPA345PA

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 8-pin PDIP
Gain-bandwidth product increases from 1 MHz to 3 MHz, or 200%; OPA345 is optimized for closed-loop gains of 5 or greater.

📋 Alternative de référence (hors catalogue)

OPA344UA

✅ Remplacement direct
Texas Instruments
📦 8-pin PDIP
Single operational amplifier · 1 circuit · 2.5 V to 5.5 V · 5.5 V · 1 MHz · 1 mV · 0.8 V/µs · Rail-to-rail

Contactez-nous pour le prix

Voir la fiche technique →

OPA344PA Valeurs maximales et caractéristiques électriques

Amplifier Type Single operational amplifier
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 1 MHz
Typical Input Offset Voltage 1 mV
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Supply Type Single-supply
Number of Channels 1 channel
Process Technology CMOS
Boîtier 8-pin PDIP
Type de montage Through-hole
Package Pin Count 8 pins

Configuration des broches de OPA344PA

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Broche 1 NC — Not connected (per datasheet)
Broche 2 IN- — Inverting input
Broche 3 IN+ — Non-inverting input
Broche 4 V- — Negative supply
Broche 5 NC — Not connected (per datasheet)
Broche 6 OUT — Output
Broche 7 V+ — Positive supply
Broche 8 NC — Not connected (per datasheet)

Applications typiques

OPA344PA convient pour 6 applications: Low-Level Sensor Signal Conditioning, Battery-Powered Measurement Front End, Precision Voltage Reference Buffer, Current-to-Voltage Conversion, Portable Audio and Communication Interface, Industrial and Laboratory Instrumentation.

🧩

Low-Level Sensor Signal Conditioning

The OPA344PA fits low-level sensor conditioning because its 1 mV typical input offset voltage helps preserve small differential signals and its rail-to-rail input stage accepts signals near the supply limits. Place it in a noninverting or differential gain stage, then route the feedback network close to the amplifier to limit parasitic effects. The 1 MHz gain-bandwidth product supports low-frequency measurement signals, while the 8-pin PDIP package simplifies through-hole construction. Verify sensor source impedance and common-mode range because those properties determine input bias-current and offset errors.

🔋

Battery-Powered Measurement Front End

OPA344PA is appropriate for a compact, single-supply measurement front end because the manufacturer identifies it as a low-power, single-supply amplifier with a maximum supply of 5.5 V. Rail-to-rail input and output behavior can improve signal utilization in a 3.3 V or 5 V system. Its 1 MHz gain-bandwidth product is sufficient for many sensor, electrode, and low-bandwidth instrumentation channels. Check bias-current and supply-current requirements when sizing the power budget, and keep bypass capacitance close to the supply pins.

📏

Precision Voltage Reference Buffer

The OPA344PA can buffer a low-current voltage reference because it is unity-gain stable and provides a 1 MHz gain-bandwidth product for driving moderate capacitive loads. A voltage follower configuration minimizes gain error and preserves the reference voltage, while the rail-to-rail output provides useful headroom at low supply voltages. The 1 mV typical input offset is important when the reference level is small. Confirm output-current capability, capacitive-load stability, and input-bias-current error in the manufacturer datasheet before finalizing the buffer.

⚡

Current-to-Voltage Conversion

OPA344PA suits low-frequency current-to-voltage conversion when the source current flows through a precision sense resistor and the amplifier develops the corresponding voltage. Its 1 mV typical offset contributes to measurement error, while unity-gain stability simplifies direct-feedback voltage followers or standard inverting converters. The 5.5 V maximum supply permits operation from a 3.3 V or 5 V rail. Keep the sense-resistor input nodes compact, use an appropriate resistor value, and verify that output swing remains sufficient for the target conversion range.

🎧

Portable Audio and Communication Interface

OPA344PA can serve as a low-frequency audio or communications interface amplifier when the design operates from a single low-voltage rail. Rail-to-rail input and output stages provide improved signal range compared with restricted common-mode devices, and the 1 MHz gain-bandwidth product is adequate for many control, microphone, and line-level paths rather than high-fidelity audio output stages. Its through-hole PDIP package is useful during prototyping. Check noise, output drive, and distortion requirements against the system specification before using it in a signal chain.

🏭

Industrial and Laboratory Instrumentation

OPA344PA is well matched to low-speed industrial control and laboratory instrumentation because it combines rail-to-rail operation, a single 5.5 V maximum supply, and a through-hole package that is convenient for sockets and prototype boards. It can amplify low-frequency process signals, buffer sensor outputs, or support threshold and waveform conditioning around a mid-supply reference. The unity-gain-stable architecture simplifies direct-feedback designs. For production equipment, consider the temperature range, noise, offset drift, and long-term stability listed in the manufacturer datasheet.

Récapitulatif des produits recommandés

OPA345PA Same-package OPA344-family amplifier for higher-gain stages Utilisé dans : Low-Level Sensor Signal Conditioning, Battery-Powered Measurement Front End, Precision Voltage Reference Buffer, Current-to-Voltage Conversion, Portable Audio and Communication Interface, Industrial and Laboratory Instrumentation
What is the OPA344PA and what are its key specifications?
The OPA344PA is a single-supply, rail-to-rail input and output CMOS operational amplifier with a 5.5 V maximum supply, 1 MHz gain-bandwidth product, and 1 mV typical input offset voltage. According to the Texas Instruments OPA344 datasheet, it is unity-gain stable and is offered in an 8-pin PDIP package. These characteristics position it as a low-power general-purpose amplifier for precision signal conditioning, buffered references, sensor interfaces, and low-voltage analog systems.
Is OPA344PA suitable for single 5 V operation?
Yes, the OPA344PA is designed for single-supply operation up to 5.5 V and has rail-to-rail input and output characteristics. Texas Instruments describes the OPA344 as a low-power, single-supply, rail-to-rail operational amplifier in the manufacturer datasheet. The rail-to-rail behavior is especially useful when the signal can approach either supply rail, although the exact input and output limits must remain within the datasheet operating conditions.
Where can I download the OPA344PA datasheet PDF?
The official OPA344PA datasheet PDF is available from Texas Instruments at the manufacturer URL listed on this page. The document is titled “Low Power, Single-Supply, Rail-to-Rail Operational MicroAmplifier” and covers the OPA344 series. It is the controlling source for electrical characteristics, pin assignments, package drawings, typical performance curves, and application guidance when evaluating the OPA344PA.
What is the OPA344PA pinout?
The OPA344PA uses an 8-pin PDIP arrangement with the non-inverting input at pin 3, inverting input at pin 2, output at pin 6, negative supply at pin 4, and positive supply at pin 7. Pins 1, 5, and 8 are not connected. Use the manufacturer pin-description table and package drawing when assigning PCB tracks or socket connections.
What is the gain-bandwidth product of OPA344PA?
The OPA344PA has a 1 MHz gain-bandwidth product and is unity-gain stable. According to the Texas Instruments product page and OPA344 datasheet, this makes the amplifier suitable for low-gain signal-conditioning stages without external compensation. Bandwidth decreases as closed-loop gain rises, so applications requiring substantial gain should verify the resulting bandwidth and phase margin against the manufacturer’s gain-bandwidth and stability plots.
Can OPA344PA amplify signals near the supply rail?
Yes, the OPA344PA supports rail-to-rail input and output operation, allowing it to process signals extending toward the supply rails. The Texas Instruments datasheet identifies rail-to-rail input and output as defining features of the OPA344 series. Input common-mode voltage and output swing still have boundary conditions, so design the signal range with margin rather than assuming perfect rail-to-rail performance.
What can replace the OPA344PA in an existing design?
The closest verified same-brand replacement is the OPA345PA, which uses the same 8-pin PDIP format but is optimized for closed-loop gains of five or greater and has a 3 MHz gain-bandwidth product. It is not an identical substitute at low gain. For a true drop-in choice, confirm pin functions, supply range, input bias current, offset voltage, output drive, stability, and manufacturer operating limits before substitution.
Is OPA344PA the same as OPA345PA?
No, OPA344PA and OPA345PA share the 8-pin PDIP format but have different gain-bandwidth characteristics. Texas Instruments describes OPA344 as unity-gain stable with a 1 MHz gain-bandwidth product, while OPA345 is optimized for gains of five or greater with a 3 MHz gain-bandwidth product. OPA345PA is therefore a possible same-package replacement for suitable higher-gain circuitry, but not an identical replacement in every application.
OPA344PA vs OPA345PA: which is better for a precision amplifier?
OPA344PA is better for unity-gain or low-gain precision stages because it is unity-gain stable and provides a 1 MHz gain-bandwidth product. OPA345PA is better when the circuit uses a closed-loop gain of at least five because its 3 MHz gain-bandwidth product is optimized for that region. Both use an 8-pin PDIP package, making them useful footprint-compatible options when their frequency and stability characteristics match the design.
When should I choose OPA344PA instead of OPA345PA?
Choose OPA344PA when the stage operates near unity gain, requires stable direct feedback, and does not need the higher bandwidth of OPA345PA. The OPA344 is specifically described as unity-gain stable, with a 1 MHz gain-bandwidth product. Choose OPA345PA instead when operating at a gain of five or greater makes its 3 MHz gain-bandwidth product and related stability characteristics more suitable.
Is OPA344PA suitable for sensor signal conditioning?
Yes, OPA344PA is suitable for many low-frequency sensor-conditioning stages because it combines a 5.5 V maximum supply, 1 MHz gain-bandwidth product, 1 mV typical offset voltage, and rail-to-rail input operation. It can buffer sensor outputs and amplify differential signals around a reference. Sensor source impedance, common-mode range, noise, and required accuracy should be checked before selecting the amplifier.
How should OPA344PA be decoupled on a PCB?
Place the supply-bypass capacitor as close as practical to the OPA344PA supply pins, with a short return path to ground. Keep the op-amp input, output, feedback, and bypass networks compact to minimize parasitic capacitance and loop area. The manufacturer datasheet’s typical application circuits and layout guidance should be used for final component selection, especially when driving capacitive loads.
How much thermal dissipation does OPA344PA produce?
The OPA344PA dissipation is estimated from the formula P = (VIN − VOUT) × IOUT plus the supply contribution from bias current. For example, with a 5 V supply, a 3 V output, and 1 mA load, the estimated load-related dissipation is 2 mW. Confirm the actual supply current from the datasheet for a complete total-power calculation and verify that the PDIP temperature rise remains within the permitted junction-temperature limit.
Where can I buy OPA344PA and check current availability?
Use the “Request a Quote” form on this page to request current OPA344PA availability, lead time, and order handling. Quote-based commerce is used because inventory and commercial terms can change rapidly. The exact manufacturer part number OPA344PA and its 8-pin PDIP package should be stated in the request to avoid ambiguity with other OPA344 package options.
What is the lead time for OPA344PA?
The current lead time for OPA344PA should be requested through the “Request a Quote” form on this page. Lead time can vary with order quantity, manufacturing status, and inventory conditions, so engineers should submit the required quantity and target date with the inquiry. For design planning, use the part in the 8-pin PDIP configuration unless an approved alternate package is specifically required.
How do I compare OPA344PA with another drop-in amplifier?
Compare the proposed replacement against OPA344PA using supply range, input common-mode range, output swing, offset voltage, input bias current, noise, gain-bandwidth product, slew rate, stability, output drive, and package pinout. The package row alone does not establish compatibility. Confirm that every connected pin serves the same function and that the alternative remains stable with the intended feedback network and load.

Données de référence d'ingénierie pour OPA344PA — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose OPA344PA when the design needs a single-supply, rail-to-rail amplifier with unity-gain stability, a 1 MHz gain-bandwidth product, and an 8-pin PDIP footprint. It is particularly suitable for low-frequency sensor conditioning, reference buffering, laboratory circuits, and single-supply measurement systems. Choose OPA345PA when the same through-hole footprint is retained but the stage operates at a closed-loop gain of five or greater and can benefit from its 3 MHz gain-bandwidth product. OPA344UA provides the same OPA344 family characteristics in a surface-mount ordering option, but it is not a physical substitute for a PDIP socket without PCB changes. Any substitution must be checked against supply range, common-mode limits, output swing, offset, bias current, noise, stability, and the exact pin functions.

Comparaison avec les alternatives

Paramètre Ce produit OPA345PA OPA344UA
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP - same 8-pin PDIP - same
Number of Channels 1 channel 1 channel 1 channel
Maximum Supply Voltage 5.5 V 5.5 V 5.5 V
Gain-Bandwidth Product 1 MHz 3 MHz 1 MHz
Gain Stability Unity-gain stable Optimized for gain of 5 or greater Unity-gain stable
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Supply Type Single-supply Single-supply Single-supply

Principaux différenciateurs

  • Purpose-built for stable unity-gain operation (vs OPA345PA)
  • Matches the same-family electrical characteristics (vs OPA344UA)
  • Through-hole format simplifies prototyping (vs OPA344UA)

Notes de conception

Place the supply-bypass capacitor immediately beside pins 7 and 4, with short, low-inductance traces to the ground reference. Route the input, output, and feedback connections compactly to minimize parasitic capacitance and susceptibility to interference. Because the OPA344 is unity-gain stable, a direct feedback connection can be used at low gain, but the feedback trace should avoid crossing or paralleling noisy power paths.

Do not assume that rail-to-rail operation gives unlimited input or output range. Confirm the allowed common-mode voltage and output swing under the actual load in the manufacturer datasheet. Also verify that the source impedance, sensor capacitance, and feedback network do not create an offset, bias-current, or stability problem. The 1 mV typical input offset must be compared with the signal amplitude when determining usable precision.

Estimated: using P = (VIN − VOUT) × IOUT, a 5 V supply, 3 V output, and 1 mA load produces 2 mW of load-related dissipation; add supply bias-current loss from the datasheet for the complete estimate. The PDIP package is suitable for low-power signal conditioning, but temperature rise still depends on PCB copper area, airflow, and the maximum ambient temperature allowed by the manufacturer.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No explicit compliance declarations were identified in the manufacturer or distributor excerpts. Review the current manufacturer product page and applicable declarations before production release.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

OPA344PA datasheet OPA344PA pinout OPA344PA datasheet pdf OPA344PA equivalent OPA344PA replacement OPA344PA vs OPA345PA OPA344PA 1MHz op amp OPA344PA 8-pin PDIP OPA344PA price OPA344PA stock Texas Instruments OPA344PA OPA344PA application circuit

Composants & termes associés

Texas Instruments OPA344PA OPA345PA OPA344UA operational amplifier voltage amplifier analog integrated circuit semiconductor single-supply amplifier rail-to-rail input rail-to-rail output RRIO unity-gain stable gain-bandwidth product input offset voltage CMOS 8-pin PDIP DIP package through-hole package sensor signal conditioning voltage reference buffer current-to-voltage conversion industrial instrumentation battery-powered measurement
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ