P2040NXN1FLB - QorIQ P2040 4-Core 667MHz e500mc MPU | NXP
Référence : P2040NXN1FLB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268 | $2 680,00 |
| 100 | $245 | $24 500,00 |
| 500 | $218 | $109 000,00 |
| 1 000 | $195 | $195 000,00 |
P2040NXN1FLB Présentation
A communications processor is a system-on-chip (SoC) class microprocessor designed for packet processing, traffic management, and secure networking functions in routers, switches, base stations, and similar infrastructure. Within the broader taxonomy, it sits at the intersection of microprocessor (MPU), network processor, and embedded SoC. QorIQ P-series devices sit below the P3/P4/P5 high-end families but above the entry-level QorIQ LS series, and the P2040/P2041 pair bridges into the quad-core segment with the architectural heritage of the higher-tier P4080 platform.
Key differentiating features of the P2040NXN1FLB include four e500mc cores running at 667 MHz, a high-bandwidth CoreNet coherency fabric, three PCIe Gen 2 controllers, two 10 Gigabit Ethernet (XAUI) plus eight 1 Gigabit Ethernet (SGMII) MACs, four SerDes lanes configurable across multiple protocols, integrated security (without SEC engine in the NX variant), and a 32-bit DDR3 memory controller with ECC support. Hardware-accelerated queue and buffer management, pattern matching, and table lookup engines are also integrated for offloading common networking data-plane tasks.
Architecturally, the P2040 uses a coherency fabric connecting private L2 caches to a shared platform cache and to the I/O and memory subsystems, allowing all four cores to share data without software intervention. The e500mc core is a superscalar, out-of-order Power Architecture implementation with hardware virtualization support and a memory management unit that enables full Linux and VxWorks deployments. Integrated networking accelerators offload packet parsing, classification, and queue management, dramatically improving packets-per-second throughput versus general-purpose CPUs.
Typical applications include enterprise and SMB routers, unified threat management (UTM) appliances, wireless LAN controllers, multi-service access nodes, industrial control gateways, and single-board computers for networking infrastructure. The wide I/O mix (PCIe, XAUI, SGMII, USB, SATA, SDHC, SPI, I2C, UART, GPIO) and the dual-core / quad-core scalability make it a flexible choice for mid-range networking and industrial platforms.
When designing with this part, ensure the 780-pin FCPBGA package uses a high-layer-count PCB (typically 8+ layers) with controlled-impedance SerDes routing, matched-length DDR3 traces, and an adequate thermal solution. The 667 MHz NX speed-grade is the lowest-cost variant of the P2040; designers should choose the encrypted or higher-speed variants when SEC or higher throughput is required. Industrial temperature grade (-40C to +105C) supports harsh-environment deployments.
This page synthesizes distributor pricing, drop-in NXP and cross-brand QorIQ alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, providing a practical reference for embedded engineers evaluating the P2040NXN1FLB.
Alternatives de remplacement direct pour P2040NXN1FLB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
P2040NXE7MMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2041NXN1FLB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2020NXE2MHB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2040NXN7MMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P2040NXN1FLB Valeurs maximales et caractéristiques électriques
| Manufacturer | NXP Semiconductors |
| Series | QorIQ P2 |
| Core | PowerPC e500mc |
| Number of Cores | 4 |
| Core Frequency | 667 MHz |
| Largeur du bus de données | 32-bit |
| Boîtier | 780-FCPBGA (23x23 mm) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +105C |
| Temperature Grade | Industrial |
| Security | Non-ENC (no SEC engine) |
| Speed Grade | 667 MHz r1.1 |
| L1 Cache (per core) | 32 KB I-cache + 32 KB D-cache |
| Shared Platform Cache | 256 KB CoreNet |
| Memory Controller | 32-bit DDR3 with ECC |
| 10 Gigabit Ethernet | 2x XAUI |
| 1 Gigabit Ethernet | 8x SGMII |
| PCIe | 3x PCIe Gen 2 controllers |
| Statut RoHS | Compliant |
| Process Technology | 45 nm low-power |
Guide de configuration des broches du P2040NXN1FLB 780-fcpbga (23x23 mm)
Configuration des broches du P2040NXN1FLB (boîtier 780-fcpbga (23x23 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P2040NXN1FLB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P2040NXN1FLB convient pour 7 applications: Enterprise and SMB Routers, Unified Threat Management (UTM) Appliances, Wireless LAN Controllers and Access Aggregators, Industrial Ethernet Gateways and Protocol Converters, Single-Board Computers for Networking, Network Attached Storage (NAS) Controllers, Edge Compute and vCPE Platforms.
Enterprise and SMB Routers
The P2040NXN1FLB's four e500mc cores at 667 MHz plus two XAUI 10G MACs make it well-suited as the main CPU in mid-range enterprise and SMB routers. The CoreNet coherency fabric enables deterministic L2/L3 forwarding performance while the integrated DDR3 controller with ECC supports routing-table-heavy workloads. Placing the part between the line cards and a switch fabric ASIC, designers gain a control-plane plus data-plane co-resident CPU. Compared with discrete multi-CPU designs, the P2040 cuts BOM cost and PCB area while preserving Linux/VxWorks software-stack reuse. Typical routing throughput at 667 MHz reaches millions of packets per second for IPv4/IPv6 forwarding with iptables offload. The NX variant is preferred when SEC engine is not required, reducing per-unit cost in price-sensitive SMB gear.
Recommandé
Unified Threat Management (UTM) Appliances
UTM appliances combine firewall, antivirus, and intrusion detection in one box, demanding simultaneous control-plane and data-plane processing. The P2040NXN1FLB delivers four e500mc cores that can be partitioned across management, DPI, and packet forwarding tasks, while a companion P2041 sibling can be added when SEC/TLS offload is required. With three PCIe Gen 2 controllers, the part interfaces to multi-Gigabit NICs, crypto accelerators, and SSD storage for log retention. Designers can scale from 1 Gbps to 10 Gbps throughput by upgrading to the 800 MHz or 1 GHz P2040 speed grades. The industrial -40C to +105C temperature grade allows deployment in non-datacenter environments. Software stacks based on Linux with netmap/DPDK are well supported on this platform.
Recommandé
Wireless LAN Controllers and Access Aggregators
Centralized WLAN controllers coordinate hundreds of access points and require sustained packet processing plus management-plane compute. The P2040NXN1FLB's eight SGMII 1G MACs provide ample connectivity for CAPWAP tunnels and PoE management, while PCIe lanes attach to wireless controller ASICs. The four e500mc cores run control-plane software (hostapd-equivalent, RADIUS, AAA) while offloading bulk forwarding. With QorIQ P2's mature Linux support and LTS kernel availability, vendors can shorten time-to-market. Industrial temperature grade enables deployment in outdoor enclosures and industrial Wi-Fi installations. The NX variant keeps the BOM lean for CAPWAP-only controller designs that do not require SEC hardware offload.
Recommandé
Industrial Ethernet Gateways and Protocol Converters
Industrial gateways translate between PROFINET, EtherNet/IP, Modbus TCP, and other fieldbus protocols, often requiring deterministic real-time behavior and industrial temperature operation. The P2040NXN1FLB's industrial -40C to +105C temperature grade and four-core e500mc architecture allow simultaneous stack execution (EtherNet/IP scanner, PROFINET device, OPC UA server) with deterministic cycle times. The DDR3 controller with ECC detects bit-flips in noisy industrial environments, increasing MTBF. Multiple PCIe lanes and SerDes ports enable attachment of industrial PHYs and fieldbus ASICs. The Linux/PROC mixed-criticality stacks are well-supported on the QorIQ P2 platform, and the NX variant minimizes BOM cost for protocol-converter-only deployments where on-chip SEC is unnecessary.
Recommandé
Single-Board Computers for Networking
SBC designers building networking and edge-compute platforms benefit from the P2040NXN1FLB's compact SoC integration, industrial grade, and rich I/O mix. The FCPBGA-780 package fits on a small SoM, while the multiple SerDes lanes enable versatile front-panel and backplane connectivity (SFP+, RJ-45, USB 3.0, SATA). Linux/U-Boot BSP availability allows fast prototyping, and the four e500mc cores provide ample headroom for containerized network functions. The NX 667 MHz speed-grade minimizes power consumption, allowing fanless SBC designs in constrained thermal envelopes. Designers can upgrade to the P2041 in the same socket for added DPAA offload without PCB rework.
Recommandé
Network Attached Storage (NAS) Controllers
Mid-range NAS controllers benefit from the P2040NXN1FLB's DDR3-with-ECC controller, multiple PCIe lanes for SATA/SAS HBAs, and four e500mc cores for simultaneous file-serving, RAID, and SMB/NFS protocol processing. SATA interfaces derived from SerDes simplify board design versus discrete SATA controllers, while the eight SGMII MACs handle multi-port 1 GbE networking. The industrial temperature grade supports deployment in small-business and edge-storage environments. The NX 667 MHz variant is appropriate for entry-level NAS where encryption is performed in software or offloaded to a discrete crypto card via PCIe, keeping the main SoC BOM cost low.
Recommandé
Edge Compute and vCPE Platforms
Virtual Customer Premises Equipment (vCPE) consolidates routing, firewall, and WAN optimization onto general-purpose compute, demanding both control-plane and data-plane performance. The P2040NXN1FLB's four cores, eight SGMII MACs, and PCIe Gen 2 connectivity allow attachment of NICs and accelerators for SR-IOV and DPDK workloads. The QorIQ P2 BSP supports KVM and container virtualization, enabling multi-tenant vCPE designs. The -40C to +105C industrial temperature grade supports deployment in outdoor customer-premises enclosures. For encrypted vCPE, designers can substitute the P2041NXN1FLB in the same socket to add SEC-based IPsec/TLS offload with no PCB changes.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P2040NXN1FLB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P2040NXE7MMB | P2041NXN1FLB | P2020NXE2MHB | P2040NXN7MMB |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23) | 780-FCPBGA (23x23) - same | 780-FCPBGA (23x23) - same | 780-FCPBGA (23x23) - same | 780-FCPBGA (23x23) - same |
| Core | PowerPC e500mc | PowerPC e500mc | PowerPC e500mc | PowerPC e500mc | PowerPC e500mc |
| Number of Cores | 4 | 4 | 4 | 2 | 4 |
| Security Engine | Non-ENC (no SEC) | SEC engine included | SEC engine included | SEC engine included | Non-ENC (no SEC) |
| DPAA Offload | No (P2040 base) | No | Yes (Frame Manager, Queue Manager) | No | No |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| 10G Ethernet (XAUI) | 2 ports | 2 ports | 2 ports | 2 ports | 2 ports |
| 1G Ethernet (SGMII) | 8 ports | 8 ports | 8 ports | 8 ports | 8 ports |
Principaux différenciateurs
- Lowest-cost 4-core P2040 variant without SEC engine (vs P2040NXE7MMB)
- Quad-core e500mc at 667 MHz with industrial temperature grade (vs P2020NXE2MHB)
- Industrial -40C to +105C temperature grade in the QorIQ P2 lineup (vs P2041NXN1FLB)
Notes de conception
Estimated: the 780-FCPBGA package with 0.8 mm ball pitch demands an 8-layer (or more) PCB with stacked micro-via construction. Route all SerDes lanes as 85-ohm differential pairs with length matching to within 150 mil and via counts minimized. Place AC-coupling capacitors as close as possible to the P2040NXN1FLB balls per the NXP hardware design guide. Use a continuous ground reference plane under all high-speed lanes to maintain impedance and minimize crosstalk. DDR3 traces should be length-matched within 25 mil across byte lanes to the 32-bit memory controller.
Estimated: at the maximum junction temperature of 105C and a 23x23 mm FCPBGA package, designers must characterize theta-JA in their application environment. Typical 4-core 667 MHz operation dissipates approximately 5-8 W depending on workload and SerDes utilization. Use a thermal pad or copper coin under the package exposed die area, and connect the top-side thermal balls to a heat spreader or heatsink. Verify with IR imaging or thermal sensor readout in production to ensure junction stays within the -40C to +105C industrial range.
Power sequencing on the P2040NXN1FLB must follow NXP's prescribed order: VDD first, then VDD_CS, then VDD_IO and SerDes supplies. Each rail should ramp monotonically and reach regulation within the datasheet-specified window to avoid latch-up. Use a multi-rail PMIC with programmable ramp rates; NXP's reference designs use the VR5100 or equivalent. Hold the PORESET input low until all supplies are stable, then release after the SYSCLK and DDR clocks are locked. Decoupling: at least 20 low-ESR 0.1 uF capacitors distributed around the package plus four bulk 22 uF tantalum or ceramic capacitors on each major supply rail.
Do not assume the NX (non-encryption) speed-grade can be field-upgraded to an SEC-equipped variant via software only; the SEC engine is a hardware block that is masked in NX parts. When designing for both encrypted and non-encrypted variants, populate the SEC ball connections with pull-ups/pull-downs as required by the most featureful variant. Also, do not route high-speed signals over a split ground plane; a single uninterrupted ground reference is required for SerDes and DDR3 to meet jitter budgets. Finally, verify DDR3 read/write leveling calibration across temperature corners; industrial-grade operation may shift timing margins.
Informations de conformité
RoHS compliant per NXP QorIQ P2 family documentation. Not AEC-Q100 qualified - this is an industrial-grade communications MPU, not an automotive device. Lead-free FCPBGA package uses lead-free solder balls compatible with JEDEC J-STD-020 reflow profiles.