PCM1720E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
Référence : PCM1720E/2K ✗ Fin de viePCM1720E/2K Présentation
A stereo audio DAC is a signal-conversion integrated circuit that transforms digital PCM audio samples into two analog output signals. In the wider electronics hierarchy, this SoundPlus device belongs to the digital-to-analog converter class within audio interface ICs and broader signal-processing semiconductors. Its role is typically the final digital-to-analog conversion stage between an audio processor, receiver, set-top box, or digital source and a speaker amplifier or line-level audio circuit.
The principal features of the PCM1720E/2K are 24-bit resolution, two output channels, a 96 kHz maximum sampling frequency, and 96 dB dynamic range. Its digital filter and output amplifier are integrated, allowing a compact implementation without separate external filter and output-amplifier stages. The I2S interface simplifies connection to digital audio processors, while support for both 16-bit and 24-bit source data accommodates consumer and professional signal chains operating at different word lengths.
System-clock architecture uses 256fS or 384fS ratios, with the required master clock derived from the audio sampling rate. The internal digital filtering and 8x oversampling architecture support conversion of MPEG2/AC-3-compatible digital audio streams. For system integration, the important consideration is ensuring that the processor supplies a compatible I2S word format, correct clock relationship, and valid channel sequencing. The integrated output stage then provides the analog stereo signals for downstream amplification.
Typical uses include home-theater audio decoding, digital television equipment, set-top boxes, MPEG2 or AC-3 audio paths, consumer stereo receivers, and other multimedia systems that convert digital audio to analog stereo. The device is particularly relevant when the source supports up to 96 kHz sampling and the design requires a compact two-channel DAC rather than a multichannel audio processor.
PCB implementation should place input and output decoupling close to their associated pins, keep the I2S and system-clock routing short, and provide a quiet ground reference for the analog outputs. Signal-integrity and ground-plane decisions are especially important when the digital interface and analog output path share the same board. Designers should also confirm the external analog-network and output-loading requirements shown in the manufacturer application circuit.
This product record combines the identified converter functions, package information, sampling and clock characteristics, lifecycle information, and practical integration guidance. It also separates verified drop-in alternatives from merely similar devices, providing a consistent basis for sourcing, schematic review, PCB design, and audio-system component selection.
Alternatives de remplacement direct pour PCM1720E/2K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesPCM1720E/2K Valeurs maximales et caractéristiques électriques
| Product Type | Stereo audio digital-to-analog converter |
| Number of Channels | 2 channels |
| Résolution | 24 bits |
| Maximum Sampling Rate | 96 kHz |
| Data Interface | I2S |
| Dynamic Range | 96 dB |
| Input Word Length Support | 16 bits or 24 bits |
| Oversampling Ratio | 8x at all supported sampling frequencies |
| System Clock Ratio | 256fS or 384fS |
| Integrated Functions | Digital filter and output amplifier |
| Audio Compatibility | MPEG2/AC-3 compatible |
| Boîtier | 20-pin SSOP |
| Type de montage | Surface mount |
| Packaging | Tape and reel |
Guide de configuration des broches du PCM1720E/2K 20-pin ssop
Configuration des broches du PCM1720E/2K (boîtier 20-pin ssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1720E/2K.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1720E/2K convient pour 6 applications: Home-Theater Stereo Audio, Digital Television Audio Output, Set-Top-Box Audio Decoder, Stereo Receiver Output, MPEG2 and AC-3 Audio Path, Legacy Audio-System Maintenance.
Home-Theater Stereo Audio
The PCM1720E/2K fits a home-theater design that needs a compact two-channel analog output stage after MPEG2/AC-3-compatible digital audio decoding. Its 24-bit resolution, 96 dB dynamic range, and maximum 96 kHz sampling rate preserve the numerical characteristics of a high-quality digital source before the signal reaches a stereo amplifier. The integrated digital filter and output amplifier reduce the external active-component count. Use I2S data with a correctly related 256fS or 384fS system clock, and follow the manufacturer application network and output-loading requirements.
Recommandé
Digital Television Audio Output
A digital television or set-top-box audio path can use the PCM1720E/2K when the decoder produces stereo PCM and the downstream amplifier requires analog inputs. The converter supports 16-bit or 24-bit source words, a two-channel output, and sampling rates up to 96 kHz, making it suitable for high-resolution television audio reconstruction. The I2S interface reduces parallel digital routing, while the integrated filter and output amplifier support a compact implementation. Validate channel ordering, clock polarity, and grounding against the intended host processor before layout release.
Recommandé
Set-Top-Box Audio Decoder
PCM1720E/2K is applicable to set-top-box and multimedia decoder designs that need a dedicated stereo analog output from a digital audio processor. Its 24-bit stereo architecture, 96 dB dynamic range, and 8x oversampling support are useful in consumer entertainment equipment where MPEG2/AC-3-derived PCM must be converted to line-level audio. The 20-pin SSOP permits a compact board layout, and the integrated output amplifier simplifies the signal chain. The host device must supply valid I2S framing and the required 256fS or 384fS master clock.
Recommandé
Stereo Receiver Output
The PCM1720E/2K can serve as the final stereo DAC stage in a receiver or digital audio appliance that accepts I2S and drives analog line-level inputs. Its two-channel topology avoids unnecessary multichannel circuitry, while 24-bit resolution and a maximum 96 kHz sampling rate support high-rate digital sources. The 96 dB dynamic range provides useful headroom for consumer audio systems. Keep the clock and data routes away from the analog output region, use local supply bypassing, and confirm the required external resistance and capacitance values in the manufacturer reference circuit.
Recommandé
MPEG2 and AC-3 Audio Path
The PCM1720E/2K is specifically identified as an MPEG2/AC-3-compatible stereo DAC, making it relevant to equipment that decodes those formats and presents the resulting digital audio through an analog stereo path. The converter accepts 16-bit or 24-bit input, supports sampling frequencies up to 96 kHz, and includes digital filtering and output amplification. Designers should verify that the decoder outputs ordinary PCM rather than a coded stream and that its I2S timing and channel mapping agree with the DAC configuration.
Recommandé
Legacy Audio-System Maintenance
The PCM1720E/2K remains useful for maintaining an existing 20-pin SSOP audio design whose schematic, layout, and qualification records reference this exact ordering code. Matching the established design reduces integration risk because the replacement decision can focus on longevity, traceability, and assembly requirements rather than a new converter architecture. Its two-channel 24-bit interface, 96 kHz maximum rate, and integrated filter and output stage reproduce the original functional role. Before use, compare the incoming part marking and terminal configuration with the approved manufacturer documentation.
Recommandé
Données de référence d'ingénierie pour PCM1720E/2K — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Package | 20-pin SSOP |
| Brand | Texas Instruments |
| Product Type | Stereo audio DAC |
| Number of Channels | 2 channels |
| — | 24 bits |
| Maximum Sampling Rate | 96 kHz |
| Data Interface | I2S |
| Dynamic Range | 96 dB |
| System Clock Ratio | 256fS or 384fS |
| Oversampling Ratio | 8x at all supported sampling frequencies |
Principaux différenciateurs
- Complete integrated stereo conversion (vs Discrete digital-to-analog conversion and output-buffer stages)
- High-rate stereo audio capability (vs Lower-rate stereo DAC architectures)
- Compact digital-audio interface (vs Parallel digital-input implementations)
Notes de conception
Route I2S data and the 256fS or 384fS system clock as short, continuous digital traces, and keep them away from the analog output network. Use a single low-impedance ground reference for the converter and its bypass capacitors rather than splitting the ground plane directly beneath the analog pins. Confirm pin orientation against the 20-pin SSOP package drawing before fixing the footprint.
Place the manufacturer-recommended input and output bypass capacitors close to their associated pins, with short ground returns. Keep the analog output traces away from switching supplies and high-current return paths. If the output must reach a line input or amplifier through a board connector, preserve a continuous reference plane and avoid adding excessive copper that changes the documented output network characteristics.
The digital source and converter must agree on I2S word width, channel ordering, and clock relationship. PCM1720E/2K accepts 16-bit or 24-bit data and uses 256fS or 384fS system-clock ratios, so a mismatch can produce channel exchange, incorrect sample timing, or invalid conversion results. Review the source processor's audio-interface configuration and measure the master clock at the converter pins.
Do not treat PCM1720EG4 or PCM1720E/2KG4 as automatic drop-in replacements merely because they are related SoundPlus DACs. The available comparison states that major parameters and circuit requirements can differ. A valid substitution must match the complete pinout, package dimensions, supply voltage, clocking, digital format, analog output network, and lifecycle requirements, followed by signal and audio verification.
Informations de conformité
Environmental qualification attributes were not stated in the available manufacturer or distributor excerpts. Confirm the exact ordering code and production lot with Texas Instruments before making a compliance declaration.