PCM1750U/1K - 18-Bit Stereo Audio ADC | Texas Instruments
Référence : PCM1750U/1K ✓ ActifPCM1750U/1K Présentation
An audio ADC is a specialized data-converter IC that transforms continuous analog audio signals into digital words for storage, transmission, processing, or playback. A dual ADC supports two audio channels, while a serial interface reduces the number of signal connections required between the converter and a digital audio processor. The PCM1750U/1K belongs to the ADC, data-converter IC, and audio-signal-conversion hierarchy used in professional and consumer audio equipment.
The principal device attributes are 18-bit resolution, two ADC channels, a serial output, and a 28-pin SOIC package. The dual-supply operating range permits bipolar analog input signals centered on ground. Its successive-approximation architecture is suitable for audio systems that prioritize a straightforward serial output format and straightforward connection to a digital audio interface. The industrial temperature qualification supports operation across -40°C to +85°C.
The converter's 28-pin gull-wing package is intended for surface mounting on printed circuit boards. Applications must account for analog and digital return-current separation, clean reference and supply connections, adequate input filtering, and controlled clocking of the serial interface. Because the device uses two analog channels, symmetric routing and grounding are important for maintaining comparable signal quality across the stereo pair. The manufacturer datasheet should be used when assigning every pin and selecting the associated input, reference, power, and interface components.
Typical uses include stereo audio capture for broadcast and studio equipment, digital mixers, multichannel recording systems, audio interface modules, and embedded media appliances. The serial architecture is particularly useful where an audio processor provides a compatible clock and data interface and the design benefits from a compact two-channel conversion solution. External filtering, gain control, and conversion-clock synchronization remain important parts of the complete signal chain.
For a new layout, place the analog input and reference connections away from digital clock and serial-data traces, and decouple each supply rail close to its package pins. Confirm the input-voltage range, settling requirements, clock timing, and master-mode configuration against the manufacturer datasheet before finalizing component values or clock-routing topology.
This page consolidates the converter's principal electrical characteristics, packaging information, drop-in references, comparison criteria, and practical PCB guidance into an engineering-focused selection record. It is intended to support faster design review without replacing the complete manufacturer datasheet.
Alternatives de remplacement direct pour PCM1750U/1K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PCM1750U/1K (même facteur de forme et même empreinte) — différant par Converter Type, Resolution, Temperature Grade.
PCM1750U
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PCM1750U/1KG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1750U/1K Valeurs maximales et caractéristiques électriques
| Converter Type | Dual successive-approximation audio ADC |
| Number of Channels | 2 channels |
| Résolution | 18 bits |
| Output Interface | Serial |
| Supply Voltage Range | ±4.75 V to ±5.25 V |
| Nominal Analog Supply | ±5 V |
| Plage de température de fonctionnement | -40°C to +85°C |
| Temperature Grade | Industrial |
| Package Type | 28-pin SOIC |
| Package Code | SOP |
| Terminal Form | Gull wing |
| Number of Terminals | 28 pins |
| Type de montage | Surface mount |
| Process Technology | CMOS |
| Delivery Form | Tape and reel |
Guide de configuration des broches du PCM1750U/1K sop
Configuration des broches du PCM1750U/1K (boîtier sop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1750U/1K.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1750U/1K convient pour 6 applications: Stereo Audio Capture, Digital Audio Mixer, Studio Recording Interface, Broadcast Audio Processing, Audio Test and Measurement, Digital Media Appliance.
Stereo Audio Capture
The PCM1750U/1K fits stereo capture because it combines two 18-bit ADC channels in one 28-pin SOIC package. The dual ±4.75 V to ±5.25 V supply range supports a bipolar analog front end centered around ground, while the serial interface reduces the number of connections required to a digital audio processor. Place the two analog channels in a symmetric layout, return analog grounds separately from switching and clock currents, and use the manufacturer datasheet to select input filtering and gain components. The two-channel architecture avoids duplicating a complete converter package when left and right signals require comparable conversion performance.
Recommandé
Digital Audio Mixer
The PCM1750U/1K can serve as the stereo conversion element at the input of a digital audio mixer. Its dual 18-bit channels provide matched conversion paths for a left and right input pair, and the serial output supports connection to a mixer or digital signal-processing controller. A practical design should isolate the converter from high-current mixer outputs and switching regulators because those paths can disturb the analog input reference. Use matched input networks where channel-to-channel consistency matters, and route the serial clock and data away from the sensitive audio inputs. Confirm the supported clocking mode and data timing from the manufacturer datasheet.
Recommandé
Studio Recording Interface
The PCM1750U/1K is applicable to a stereo studio recording interface requiring 18-bit conversion from both analog channels. Its dual-channel organization supports a compact converter section, and its industrial temperature range of -40°C to +85°C accommodates equipment operating beyond typical office temperatures. The analog section must be designed around the permitted bipolar input range, with low-noise reference and supply arrangements. Keep connector and preamp return currents out of the converter ground path, and place input filtering close to the package to minimize pickup before conversion. The manufacturer datasheet controls the required external-component values and timing assumptions.
Recommandé
Broadcast Audio Processing
The PCM1750U/1K can form the stereo analog-to-digital input stage of a broadcast audio-processing chain. Two 18-bit channels provide a compact path for left and right program audio, while the serial interface allows conversion data to pass to a digital processor. Because broadcast equipment can combine sensitive microphone inputs with switching and communication circuitry, the converter needs careful grounding and isolation. Use low-impedance decoupling at each supply pin, maintain symmetric analog routing, and keep digital interfaces away from input and reference traces. Verify the required audio bandwidth, conversion timing, and clock source against the manufacturer datasheet before finalizing the signal path.
Recommandé
Audio Test and Measurement
The PCM1750U/1K is suitable for audio test equipment that converts two analog test channels into digital data for analysis. The 18-bit dual-channel configuration permits simultaneous left and right measurements, while the serial interface supports transfer to a controller, FPGA, or digital signal processor. Input conditioning must prevent signals from exceeding the converter's permitted analog range, and the reference network should remain stable during repeated measurements. Place the converter close to the input buffers, separate analog and digital returns, and provide local bypass capacitance. Before instrument qualification, check the manufacturer datasheet for dynamic-range, settling-time, and clocking conditions relevant to the required test bandwidth.
Recommandé
Digital Media Appliance
The PCM1750U/1K can support stereo input acquisition in a digital media appliance where analog audio enters a processor-based playback or monitoring system. Its two ADC channels avoid separate packages for left and right paths, and the serial interface is useful when board space and connector count are constrained. The device still requires a clean analog environment even inside a dense digital appliance, so switching regulators, memory, and high-speed processors should not share unrestricted return paths with the converter. Use controlled partitioning between analog and digital ground systems, local supply decoupling, and short serial routes. Validate data timing with the processor or programmable logic used in the final design.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1750U/1K — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1750U | PCM1750U/1KG4 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin SOIC | 28-pin SOIC - same | 28-pin SOIC - same |
| Converter Type | Dual successive-approximation ADC | Dual successive-approximation ADC | Dual successive-approximation ADC |
| Resolution | 18 bits | 18 bits | 18 bits |
| Number of Channels | 2 channels | 2 channels | 2 channels |
| Output Interface | Serial | Serial | Serial |
| Supply Voltage Range | ±4.75 V to ±5.25 V | ±4.75 V to ±5.25 V | ±4.75 V to ±5.25 V |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Process Technology | CMOS | CMOS | CMOS |
Principaux différenciateurs
- Exact dual-channel conversion function (vs PCM1750U)
- Identical package and pin compatibility (vs PCM1750U)
- Matching industrial operating class (vs PCM1750U/1KG4)
Notes de conception
Keep the PCM1750U/1K analog inputs and reference connections away from serial clock, serial data, and switching-node traces. Route the two stereo channels symmetrically so their input capacitance, grounding, and trace geometry remain comparable. Where possible, use a continuous analog ground region beneath the converter and connect it to the digital ground at the manufacturer's recommended single point. Avoid routing input traces beneath the package or between digital and power pins.
Provide separate, stable positive and negative supply rails across the full ±4.75 V to ±5.25 V operating range. Place the required bypass capacitors directly beside the corresponding power pins and connect them through short ground paths. Because the converter uses bipolar analog signals, a single-ended 5 V rail cannot replace the dual-supply arrangement. Validate ground offset and supply ripple at the converter because both can affect the captured audio signal.
Use the manufacturer datasheet to select the input and reference network, clock mode, and digital-interface timing. Keep the conversion clock and serial outputs away from the analog input nodes, and avoid adding test-probe capacitance directly to sensitive audio pins. If the audio source has a wide bandwidth, include the prescribed anti-alias filtering before the ADC. Validate settling and clock timing with the actual source impedance and digital controller rather than relying only on nominal converter values.
Do not substitute a converter solely because it has a similar 28-pin outline. Confirm pin names, supply arrangement, interface timing, reference requirements, sample-rate capability, and package dimensions against the manufacturer datasheet. A valid drop-in decision also requires checking the approved ordering suffix and delivery format. The PCM1750U and PCM1750U/1KG4 references are appropriate candidates because their terminals and package are identified as consistent with PCM1750U/1K.
Informations de conformité
PCM1750U/1K is an industrial-temperature audio converter rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or the current product documentation.