PCM1792ADB - 24-Bit 192kHz Stereo DAC | Texas Instruments
Référence : PCM1792ADB ✓ ActifPCM1792ADB Présentation
A DAC is a digital-to-analog converter, a signal-conversion IC that transforms digital audio samples into a continuous analog voltage or current representation. Within the signal-chain hierarchy, the PCM1792ADB belongs to the audio converter family, connects digital source equipment to an analog output stage, and operates as part of a broader audio signal-processing system. Its balanced current outputs allow designers to optimize analog gain, noise behavior, and channel matching in the subsequent circuitry.
Key performance figures include 24-bit resolution, a maximum sampling rate of 192 kHz, a differential output current of 7.8 mA peak-to-peak, and a dynamic range of 132 dB for mono operation at 9 V rms. Stereo dynamic range reaches 129 dB at 4.5 V rms and 127 dB at 2 V rms. Total harmonic distortion plus noise is specified at 0.0004%, making the converter suitable for demanding audio playback, studio monitoring, digital mixing, and multichannel audio systems.
The advanced-segment DAC architecture is designed to provide strong dynamic performance and improved tolerance to clock jitter. Digital filtering is part of the conversion path, while the balanced differential outputs support low-noise analog design. Because the device produces current rather than a direct voltage output, an external operational-amplifier or current-to-voltage stage is normally required to establish the final analog output voltage and accommodate the desired channel gain.
Typical applications include professional digital mixers, high-resolution CD and DVD player analog stages, audio DAC products, studio monitors, and digital recording equipment. The converter is also appropriate for consumer and industrial systems requiring 24-bit playback through 192 kHz. In these systems, the PCM1792ADB handles the conversion stage while external circuitry performs current-to-voltage conversion, analog filtering, gain setting, and output isolation.
The main design consideration is supply planning. The device uses dual analog supplies, and its specified dynamic range changes with operating voltage: 132 dB at 9 V rms mono, 129 dB at 4.5 V rms stereo, and 127 dB at 2 V rms stereo. Board layout should keep digital-clock and data traces away from sensitive analog output paths, while the analog output stage must preserve the converter’s balanced symmetry.
This product page combines the manufacturer’s core architecture information, exact PCM1792ADB orderable identifiers, package details, operating limits, application guidance, and same-package family comparisons. It also identifies where engineering data such as the complete pin description, electrical characteristic curves, and recommended external circuits must be taken directly from the manufacturer datasheet.
Alternatives de remplacement direct pour PCM1792ADB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PCM1792ADB (même facteur de forme et même empreinte) — différant par Package, Maximum Sampling Rate, Process Technology, Architecture, Control Interface.
PCM1792DB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PCM1795DBR
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PCM1796DB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PCM1798DB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →PCM1792ADBR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1792ADB Valeurs maximales et caractéristiques électriques
| Converter Type | Stereo audio digital-to-analog converter |
| Architecture | Advanced-segment DAC |
| Résolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Maximum DSD Sampling Rate | 200 kHz DSD |
| Number of DAC Channels | 2 channels |
| Dynamic Range, 9 V rms Mono | 132 dB |
| Dynamic Range, 4.5 V rms Stereo | 129 dB |
| Dynamic Range, 2 V rms Stereo | 127 dB |
| THD+N | 0.0004% |
| Type de sortie | Differential current output |
| Differential Output Current | 7.8 mA peak-to-peak |
| Digital Oversampling | 8x oversampling |
| Process Technology | CMOS |
| Boîtier | 28-pin SSOP (DB), 5.30 mm width |
| Température de fonctionnement | -25 °C to +85 °C |
| Control Interface | Software control |
| Analog Supply Configuration | Dual supply |
Guide de configuration des broches du PCM1792ADB 28-pin ssop (db), 5.30 mm width
Configuration des broches du PCM1792ADB (boîtier 28-pin ssop (db), 5.30 mm width). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1792ADB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1792ADB convient pour 6 applications: Professional Studio Monitor DAC, High-Resolution Digital Player, Digital Mixing Console, Audiophile Desktop DAC, Digital Recording Playback, Broadcast Monitoring System.
Professional Studio Monitor DAC
PCM1792ADB fits a professional monitor conversion stage because it provides 24-bit resolution, sampling up to 192 kHz, 0.0004% THD+N, and differential current outputs. The balanced-output architecture helps preserve channel symmetry through the external current-to-voltage stage, while the converter’s low specified distortion supports accurate monitoring of critical low-level audio content. Designers should use the manufacturer’s recommended analog-output topology and verify the dual-supply requirements. Component selection for the gain stage must preserve the converter’s low-noise and high-frequency characteristics rather than introducing an output-stage bottleneck.
Recommandé
High-Resolution Digital Player
A high-resolution digital player can use PCM1792ADB to convert 24-bit PCM streams at rates up to 192 kHz. Its 127 dB stereo dynamic range at 2 V rms, 129 dB at 4.5 V rms, and 0.0004% THD+N provide a strong specification baseline for premium playback equipment. The differential current output requires a carefully designed analog stage, typically with matched operational amplifiers and passive filtering. Keeping the digital clock and data routes away from that stage helps prevent converter performance from being limited by board-level noise coupling.
Recommandé
Digital Mixing Console
PCM1792ADB is appropriate for the stereo monitor or auxiliary output path of a digital mixing console because it combines 24-bit conversion, 192 kHz sampling, and differential current outputs in a compact 28-pin SSOP. The balanced current-output structure can feed a low-noise operational-amplifier stage, reducing sensitivity to ground and noise differences between channels. The 132 dB mono dynamic-range figure at 9 V rms supports demanding monitoring levels. Designers should confirm the digital audio format, clocking scheme, control interface, and external current-to-voltage network for each console output card.
Recommandé
Audiophile Desktop DAC
PCM1792ADB suits a desktop or compact audiophile DAC when the objective is high-resolution playback without a switching converter in the final signal path. Its advanced-segment DAC architecture supports strong dynamic performance and improved clock-jitter tolerance, while differential outputs simplify balanced channel construction. The device does not directly deliver a ground-referenced voltage, so the external analog stage remains central to sound-system performance. Component grouping, short output paths, stable dual supplies, and layout that separates clocks from analog summing nodes are essential for realizing the specified 127–129 dB stereo dynamic-range range.
Recommandé
Digital Recording Playback
PCM1792ADB can support high-resolution playback in digital recording systems where a 24-bit DAC operating up to 192 kHz is required. Its 0.0004% THD+N and differential output arrangement make it suitable for conversion before a balanced analog monitoring stage. The converter’s digital filtering must be considered when designing the overall bandwidth, because filtering behavior affects the transition band and out-of-band noise. Engineers should compare the digital filter characteristics with those of PCM1796DB and PCM1798DB when a system change is being evaluated rather than assuming that every 28-pin family member behaves identically.
Recommandé
Broadcast Monitoring System
PCM1792ADB is applicable to broadcast monitoring and program-quality assurance equipment requiring a high-resolution stereo conversion stage. The 24-bit format and 192 kHz sampling support professional digital workflows, while 129 dB stereo dynamic range at 4.5 V rms and 0.0004% THD+N provide useful fidelity limits. Balanced differential outputs help maintain signal integrity over longer cable runs when followed by a balanced receiver. The system designer must still address digital-domain clipping, format conversion, clock synchronization, and the analog output stage so that the DAC’s intrinsic performance is not obscured by upstream or downstream impairments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1792ADB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1792DB | PCM1795DBR | PCM1796DB | PCM1798DB | PCM1792ADBR |
|---|---|---|---|---|---|---|
| Package | 28-pin SSOP (DB) | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | 24-bit stereo DAC | Stereo DAC | Stereo DAC | 24-bit stereo DAC | Stereo DAC | 24-bit stereo DAC |
| Pin Count | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins |
Principaux différenciateurs
- High specified dynamic range (vs PCM1796DB)
- Documented high-resolution operation (vs PCM1798DB)
- Identical electrical orderable variant (vs PCM1792ADBR)
Notes de conception
Keep the PCM1792ADB clock, data, and control traces away from the analog output pins and current-to-voltage conversion network. Route the differential outputs as a closely matched pair and provide a quiet ground return for the analog stage. The manufacturer datasheet’s recommended application circuit and layout should be used to establish the placement of decoupling capacitors and the relative positions of the digital and analog sections.
Treat the PCM1792ADB outputs as differential current outputs rather than conventional voltage outputs. Select the external operational-amplifier or current-to-voltage network for the intended full-scale output, bandwidth, noise, and channel-matching requirements. Maintain symmetry between the positive and negative output paths because mismatched impedance or unequal trace geometry can degrade stereo balance even when the DAC itself operates within specification.
Design the dual analog supply rails from the operating point required for the target dynamic range. The manufacturer specifies 132 dB mono dynamic range at 9 V rms, 129 dB stereo dynamic range at 4.5 V rms, and 127 dB stereo dynamic range at 2 V rms. Place the required bypass capacitors close to the supply pins and verify startup, sequencing, and output settling for the complete analog output stage.
Do not treat a shared 28-pin SSOP outline as proof that every PCM179x device is interchangeable. Before using PCM1792DB, PCM1795DBR, PCM1796DB, or PCM1798DB in an existing board, compare supply pins, digital audio format, clock requirements, control registers, reset behavior, filter characteristics, and analog output definitions against the original schematic. Approve the replacement only after those functions have been checked.
Informations de conformité
Compliance status has not been established from the manufacturer product information used for this record. A temperature range of -25 °C to +85 °C is stated, but that operating range does not by itself establish AEC-Q100 qualification.