PCM1794DBR - 24-Bit 192 kHz Stereo Audio DAC | Texas Instruments
Référence : PCM1794DBR ✓ ActifPCM1794DBR Présentation
A digital-to-analog converter, or DAC, is an integrated circuit that converts digital audio samples into continuous analog voltage signals. The PCM1794 belongs to the broader digital-to-analog converter category within data-converter and audio IC families. Its stereo architecture produces left and right analog outputs from a digital audio stream, while the 24-bit resolution and 192 kHz sampling capability support high-resolution playback formats. In a complete audio system, the DAC typically sits between a digital audio source, such as a transport, streamer, USB interface, or digital mixer, and the analog output stage.
Key features include 24-bit resolution, sampling rates up to 192 kHz, I2S digital audio support, stereo operation, and 132 dB SNR. The 28-lead SSOP package provides the physical interface for digital data, clock signals, control signals, analog outputs, and power connections. These characteristics make the converter useful in CD-quality playback systems as well as higher-resolution audio equipment. Hardware control allows system designers to adjust operating behavior through external control signals rather than relying exclusively on software registers.
The PCM1794 is a monolithic CMOS integrated circuit that includes stereo digital-to-analog converters and associated support circuitry. Its architecture is intended to provide a straightforward digital-audio-to-analog conversion stage while preserving the dynamic-range capability required by premium audio products. The converter can be paired with a high-quality output filter, headphone amplifier, line amplifier, or analog preamplifier to create a complete playback path. System clocking and digital-interface timing remain important design considerations, so the manufacturer datasheet should be used for signal timing, pin connections, and recommended application circuits.
Typical applications include high-resolution audio DAC boards, CD and DVD player designs, network audio players, digital mixing consoles, active speakers, professional audio equipment, and multimedia systems. The 132 dB SNR figure is particularly relevant when minimizing converter-generated noise and preserving dynamic range. For designs requiring a very low-noise analog output, the DAC should be followed by appropriately designed analog stages and power-supply arrangements that do not degrade the converter's performance.
When designing around the PCM1794DBR, place decoupling capacitors close to the power pins and route digital clock and data signals away from sensitive analog output paths. Confirm the device's pin names and connection requirements against the Texas Instruments datasheet before layout release. The most important selection trade-off is whether the application requires the PCM1794's 24-bit, 192 kHz stereo performance and hardware control, or whether a related device with different filter, output, or clock characteristics would better match the product architecture.
This product page combines the Texas Instruments PCM1794 specifications with practical application guidance, comparison criteria, package information, and drop-in replacement notes. It is intended to help engineers evaluate the PCM1794DBR for audio DAC and signal-chain designs, while directing detailed sourcing and current commercial questions to the Request a Quote workflow.
Alternatives de remplacement direct pour PCM1794DBR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PCM1794DBR (même facteur de forme et même empreinte) — différant par Signal-to-Noise Ratio, Maximum Sampling Rate, Digital Audio Interface, Package, Clock Jitter Tolerance.
PCM1798DBR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1794ADBR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1798DBRG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PCM1794DBR Valeurs maximales et caractéristiques électriques
| Converter Type | Stereo audio digital-to-analog converter |
| Résolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Digital Audio Interface | I2S |
| Signal-to-Noise Ratio | 132 dB |
| Channel Count | 2 channels |
| Package Type | 28-lead SSOP |
| Package Code | SSOP |
| Terminal Count | 28 terminals |
| Style de montage | Surface mount |
| Terminal Form | Gull wing |
| Control Method | Hardware control |
| Process Technology | CMOS |
| Product Category | ADCs/DACs - Special Purpose |
Guide de configuration des broches du PCM1794DBR ssop
Configuration des broches du PCM1794DBR (boîtier ssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour PCM1794DBR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PCM1794DBR convient pour 6 applications: High-Resolution Audio DAC Board, CD and Network Audio Player, Professional Audio Monitor Controller, Active Speaker USB Audio Front End, Digital Mixing Console Output Stage, Multimedia Audio and AV Processor.
High-Resolution Audio DAC Board
The PCM1794DBR fits a high-resolution stereo DAC board that accepts I2S digital audio and produces analog left and right outputs. Its 24-bit resolution supports detailed sample representation, while the maximum 192 kHz sampling rate accommodates high-bandwidth source material. The documented 132 dB SNR provides a strong starting point for a quiet conversion stage in a network player, transport, or digital music system. In implementation, the converter should follow the manufacturer application circuit, with stable clocking, close decoupling, and a carefully designed reconstruction filter. The major benefit is a dedicated stereo DAC stage rather than sharing conversion with a general-purpose codec.
Recommandé
CD and Network Audio Player
PCM1794DBR can form the central conversion stage of a CD or network audio player when the front end supplies compatible I2S data and clock signals. The converter accepts a 24-bit digital stream and supports sampling rates up to 192 kHz, allowing one DAC design to serve conventional CD-rate playback and higher-rate network audio sources when the source and clock architecture support them. Its 132 dB SNR specification is useful in a product marketed around low-noise reproduction. The analog path should use a proper reconstruction network and low-noise output amplifier, while the digital route should preserve signal integrity through correct impedance and clock layout.
Recommandé
Professional Audio Monitor Controller
The PCM1794DBR is appropriate for the digital-to-analog conversion section of a professional monitor controller or rack-mounted audio processor. Its stereo 24-bit architecture accommodates balanced or unbalanced downstream signal paths, and the 132 dB SNR specification supports clean conversion of program material. The converter should operate from a stable low-noise supply and use a digital layout that isolates I2S data and clock lines from the analog outputs. An analog output filter and adjustable gain stage then determine the final monitor-level interface. This application benefits from using the dedicated DAC rather than a multiplexed codec because channel separation, control, and analog-output design can be optimized for the product.
Recommandé
Active Speaker USB Audio Front End
PCM1794DBR can serve as the high-resolution DAC front end of an active speaker connected to a USB audio interface. Its I2S interface provides a conventional digital handoff from the source controller, while 24-bit resolution and up to 192 kHz sampling create headroom for modern digital sources. The 132 dB SNR specification is valuable in an active speaker because the converter's noise contribution sits directly in the signal path before power amplification. In a practical design, isolate the I2S and clock routing from the analog output, provide local decoupling, and design the output filter for the intended crossover and amplifier input characteristics.
Recommandé
Digital Mixing Console Output Stage
The PCM1794DBR is suitable for the master stereo output conversion stage of a compact digital mixing console when the console engine provides compatible I2S channels. The converter's 24-bit word length and 192 kHz maximum sampling rate support high-resolution multitrack and mastering workflows, while 132 dB SNR helps preserve quiet passages in the mix. A dedicated stereo DAC simplifies clock distribution compared with sharing a converter among multiple zones. The implementation should include clean reference and supply routing, short digital paths, and a differential or single-ended analog output network selected to match the mixer architecture. Validation should cover inter-channel behavior and full-scale output conditions.
Recommandé
Multimedia Audio and AV Processor
PCM1794DBR can provide a dedicated stereo analog output for multimedia systems, AV processors, and premium consumer electronics where audio performance exceeds the requirements of a basic integrated codec. The I2S interface allows connection to a digital audio processor, and the converter supports 24-bit data with sampling rates up to 192 kHz. Its 132 dB SNR specification creates a low-noise foundation for headphone, line, or amplified speaker outputs. The design must pay particular attention to clock jitter, grounding, and analog filtering because those factors determine how much of the converter's theoretical performance reaches the final output. A dedicated solution also simplifies product differentiation from designs using multiplexed audio converters.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PCM1794DBR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PCM1798DBR | PCM1794ADBR | PCM1798DBRG4 |
|---|---|---|---|---|
| Package | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP | 28-lead SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Converter Function | Stereo digital-to-analog converter | Stereo digital-to-analog converter | PCM1794-family audio converter | Stereo digital-to-analog converter |
Principaux différenciateurs
- Dedicated 24-bit stereo DAC with high sampling capability (vs PCM1798DBR)
- Direct hardware-control architecture for product-level sequencing (vs PCM1794ADBR)
- Established 28-lead SSOP product format (vs PCM1798DBRG4)
Notes de conception
Use the manufacturer application circuit as the layout baseline. Place decoupling and signal-conditioning components close to their associated PCM1794DBR pins, route I2S data and clock signals away from analog outputs, and provide a continuous ground reference for the converter and analog network. Keep switching-regulator loops and high-current return paths outside the quiet analog-output region to preserve the benefit of the device's 132 dB SNR rating.
Do not treat a matching SSOP outline as sufficient proof that a substitute is functionally interchangeable. Before replacing PCM1794DBR with PCM1798DBR, PCM1794ADBR, or PCM1798DBRG4, compare clock requirements, digital-interface timing, filter behavior, analog-output architecture, control signals, and supply sequencing. The available comparison material identifies functional differences in output-current and digital-filter behavior for PCM1798DBR, so board-level audio validation is essential.
Keep digital clock, data, and ground-return paths continuous and away from the stereo analog outputs. Use the pin-description table in the Texas Instruments datasheet when assigning signals, and follow its recommended component values and topology. An incorrect I2S alignment assumption, missing termination arrangement, or poorly returned clock can create distortion or jitter-related degradation even when the nominal 24-bit and 192 kHz capabilities are unchanged.
Informations de conformité
The available product information does not explicitly state the requested compliance statuses. Check the current manufacturer product page and orderable-part documentation before making a compliance claim.